This product has been manufactured to our high standards at Novopro and has been
QC tested prior to your purchase but if you do encounter any problems with the
Novopro V20, then please check the following before contacting
or returning to your place of purchase:
1) Ensure the batteries are not at; please try another set of new or fully charged
batteries.
2) Make sure that the aerials are extended vertically.
If you are still encountering problems, please turn o the power to the
receiver and remove the batteries from the transmitter.
Wait for 3 minutes then re-power the units.
NOVOPRO V20 SPECIFICATIONS
Operational Carrier Frequencies VHF 173 - 175 MHz
Frequency Stabilization <+/-40ppm
Image Rejection>75dB and Dynamic Range >95dB
Harmonic Distortion < 1%
Frequency Response 50Hz~15KHz +/-3dB
Receiver Power required: DC13-15V, min. of 200mA
Battery Voltage 3V (2 x 1.5V)
Continuous Usage: approx. 8 hours (using premium quality batteries)
S/N Ratio >70dB and T.H.D. : <1%
RECEIVER Dimensions are:17.5cm x 13.5cm x 4.3cm
HANDHELD TRANSMITTER Dimensions are: 23.8cm x 5cm x 5cm
For the latest updates and information on the entire Novopro range visit:
www.novopro.co.uk
Novopro products are designed and engineered in the UK and manufactured in
China.
Due to continuous product developments & improvements, specications and
appearance are subject to change. © Copyright Novopro Ltd 2014. E&OE.