novostella NTF 71 User manual

Smart LED Flood Light User Guide

English
Deutsch
Français
Español
Italiano
1-18
19-36
37-54
55-72
73-90
Contents

1

Thank you for ordering from Novostella. Set-up is easy and takes only a few minutes

Part One
How to insall the light?
Part One - How to insall the light?
Part Two
How to pair the light to Smart Life app?
Part Three
How to connect the lights to Internet, and control with Amazon Alexa and
Google Assistant?
2
2-5
6-9
10-18
Model

Input Voltage
Color
Frequency

Bean Angle
Working temperature
1. Parameters
Warning




using it immediately.

(6) To ensure the light works properly, please use the voltage indicated on
the packing.
NTF71
25W
NTF72
50W
50/60Hz
IP66
120°
-20~40℃
US: RGB, Cool White, Warm White EU/UK: RGB
US: 100-120V AC EU/UK: 220-240V AC

UK/EU: H05RN-F 2×1.0mm²
US: 18AWG 2×0.824mm²
Antenna
Heatsink
Lock screw
Bracket
LED light source
Reflector
Tempered glass lid
US Plug UK Plug EU Plug
2. Components


is damaged, it shall be exclusively replaced by the manufacturer of his service

3
3. Dimension
NTF71
Weight: 1.1lb/0.5kg
Max Projected Area: 30㎡
NTF72
Weight: 2.2lb/1kg
Max Projected Area: 50㎡
15cm/5.9in
20cm/7.87in 5cm/1.97in
32cm/12.6in
4.5cm/1.8in
25cm/9.8in

4

Step A: According to the spacing of two screw bits on the bracket, drill two

Step B
Step C: A
in to power the light on.
A
B C


5
01 Make sure that the distance between the light and the object being lits is
more than 1 meter, so as to avoid high temperature caused by short distance.
(1) This light is waterproof and damp proof. It is protected against the rain,
but it cannot be immersed in water.
(2) 
as heavy as the light.
(3) T
working temperature should be less than 45°C Too high the working
t
light.
FCC ID: 2AWONNTF71
T
f
and (2) this device must accept any interference received, including interference


uncontrolled environment. This equipment should be installed and operated
with minimum distance of 20 cm between the radiator and your body. This


Note:
The light source of this Iuminaire is not replaceable.

01


phone, and connect to the Internet.
Step A:
Please choose either way below to download and install the app.
(1) As per your phone system, choose the QR code to scan.
6
Part Two - How to pair the light to
Smart Life app?
(2) Search keyword ‘Smart Life’ in Apple Store of Google Play.
Step B: Create an account on Smart Life and login.
Note: Please keep your account and password in mind for Alexa or Google
Assistant APP pairing later.

2. P
o
blink). Please make sure to keep an interval over 2 seconds between each
t

Step C : Add the light to Smart Life App
1. 
choose 'Light Source (BLE)' to add the lights.
7

3. Give a name to the light.
Note: A simple name is recommended.
4. The named light will be shown on the app homepage. Now you can control


8

How to group the lights?
Make sure all the lights have been paired to “Smart Life” app, then group the
lights by following these steps.
1. 
then click “Create Group” .
2. Choose the lights you want to group from the device list and rename the
group.
Now you can control the lights and sync with the music, the colors will be
synchronized in the group.
9

Part Three – How to connect the lights to Internet,
and control with Amazon Alexa and Google Assistant?
If you want to connect the lights to Internet, and control with Amazon

with our Hub accessory (sold separately).
Please click below link to purchase the Hub accessory from our shop:
US: 
UK: 

Step A:
Please turn on the WiFi on your phone. The hub only supports 2.4GHz WiFi
network, not 5.0GHz. Please make sure your working network is 2.4GHz and

** It is strongly recommended to place the hub to somewhere that is between

signal.
10


then choose ‘Wireless Gateway (BLE)’ to add the hub.
11




3. Choose your WiFi network, enter your password, and tap the ‘Next’

12

Step B : Add the lights to the Hub.
Please make sure all the lights have been paired to ‘Smart Life’ App


13

14
How to control the light with
Amazon Alexa?

15

16

How to control the light with Google Assistant?
17

18