NRS Healthcare Mowbray Lite M66625 User manual

1
USER INSTRUCTIONS
MOWBRAY LITE TOILET FRAME AND SEAT
RANGE
M66625 Standard - Fixed Width Assembled M92740 510mm - Fixed Width Assembled
N36974 Adjustable Width Assembled
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
Maximum User Weight
30st
190kg
1. INTENDED USE
The height and width* adjustable Mowbray Lite toilet frame and seat range has been designed to assist those who
have difficulty in lowering onto or rising from a standard toilet. The comfortable plastic moulded seat offers support in
a natural position. An optional floor fixing kit is also available (F11572).
*N36974 only.
2. SAFETY
WARNING: The maximum user weight must not be more
than 190Kg (30st).
DO NOT: Attempt to stand or climb on the product.
MAKE SURE: All legs are set at equal height to avoid
rocking.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are missing or
damaged and do not try and assemble.
3.1 Contents:
Item M66625 M92740 N36974
Toilet Seat 1 1 1
Seat Frame Assembly 1 1 n/a
RH Frame Assembly n/a n/a 1
LH Frame Assembly n/a n/a 1
Crossbars n/a n/a 2
Leg Extensions 4 4 4
E-clips 4 4 8
4. ASSEMBLY
These products are supplied fully assembled apart from
the seat.
4.1 Fit the Seat
Remove the seat from the bag and snap into place on the
centre bars of the frame.
5. INSTALLATION
Adjust the height and width* for the toilet and user before
installation.
5.1 Adjust the Height - All Models
1. Remove the 4 x leg extension E-clips.
2. Slide the leg extensions to the required height,
align the holes and replace the E-clips.
Note: Make sure the leg extensions have all been set to
the same height.

2
3. Lift the toilet seat and lid.
4. Place the Mowbray over the toilet with the cutaway
of the seat at the front and the integral splash guard
placed centrally over the toilet bowl.
Note: Make sure the seat and toilet frame are fully secure
before use.
5.2 Adjust the Width (N36974)
1. Remove the 4 x cross bar E-clips.
2. Slide the side frame assemblies to the required
width, align the holes and replace the E-clips.
Note: Make sure the side frame assemblies have been
set to the same width.
3. Lift the toilet seat and lid.
4. Place the Mowbray over the toilet with the cutaway
of the seat at the front and the integral splash guard
placed centrally over the toilet bowl.
Note: Make sure the seat and toilet frame are fully secure
before use.
5.3 Fitting the Optional Floor Fixing Kit F11572
Please refer to the user instructions provided with the
optional floor fixing kit.
6. MAINTENANCE
Check that all fixing clips are inserted correctly and that
there is no excessive movement.
If a floor fixing kit has been fitted, check the fixing screws
are secure.
Inspect the product regularly for signs of wear or damage,
pay particular attention to the condition of the ferrules.
Any suspected faults or damage should immediately be
reported to the supplier and the product taken out of use.
7. CLEANING INSTRUCTIONS
Please check the suitability of the cleaning products
before use. Do not use abrasive cleaners or cloths as
these could permanently damage the surface and
invalidate any warranty.
Regularly clean with a non-abrasive cleaner.
To disinfect, wipe with a dilute bleach solution, and rinse
thoroughly with fresh water.
This product is suitable for thermal decontamination and
can be steam cleaned or autoclaved on cleaning cycles
up to 70°C.
Allow product to fully dry prior to use/storage.
8. ACCESSORIES & SPARE PARTS
F11572 - Floor Fixing Kit
F17938 - Ferrule
M66820 - Seat
N43218 - E-clips x 4
For further information please visit our website or call
Customer Services on the details below.
9. PRODUCT DISPOSAL
This product should be thoroughly cleaned prior to
disposal.
This product is manufactured from metal and plastic and
can be disposed of through Local Authority Household
Waste and Recycling Centres or through Local Trade
Waste Collectors.
10. PRODUCT GUARANTEE
NRS Healthcare guarantee this product for a period of
12 months, from the date of purchase, against faulty
materials and workmanship.
This guarantee does not cover; abuse, misuse,
interference or tampering with any part of the product.
Any guarantee issued by NRS Healthcare does not affect
your statutory rights.
M66613-UI-1 28-06-2022
NRS HEALTHCARE Sherwood House, Cartwright Way, Forest Business Park
Bardon Hill, Coalville, Leicestershire, LE67 1UB, UK.
Tel: Customer Services: 0345 121 8111 Email: [email protected]
NRS Healthcare is a leading supplier of community equipment and daily living aids.
Please visit one of our websites to view our full range of products:
www.healthcarepro.co.uk or www.completecareshop.co.uk