NST 4 CH Vehicle Mobile DVR User manual

1
4 CH Vehicle Mobile DVR
User Manual
2011 NOV V1.1
optional

0
Index
A. Features...........................................................................1
B. Specification.....................................................................2
C. Product Appearance ........................................................3
D. Product Dimension ..........................................................4
E. Record / Stop-Record ......................................................5
F. System operating instruction............................................6
G. Playback ........................................................................12
H. Format Memory Card.....................................................21
I. Restoring Memory Card ..................................................24
J. 3G-SIM Card Setting (with 3G Module)..........................26

1
A. Features
Max. up to 4 CH vehicle cameras, can take record for inside and
outside the vehicle.
Video output for live view, playback with monitor.
H.264 Compression format.
Recording format：D1 and CIF.
Build-in single channel microphone.
Quick Search Overall Event Log.
The full recording time and date can be showing in the monitor
directly.
Auto-Record after memory card Plug-in and Power Supplied.
Data Store in SD card for better safety and anti-vibration
performance.
4 sets of alarm input ports, built-in buzzer.
Support Record Video with audio, video, G-sensor and GPS data
at the same time.
Optional for 3G module, control the driving status and data at any
time.

2
B. Specification
Items Description
Video format NTSC PAL
Video input 4CH Input
Audio input 1CH Input
Video output 1CH output
Audio output 1CH output
Alarm input 4 alarm input
Alarm output Buzzer
Display mode Full Screen, 4 Split
Record
resolution
highest D1 720 x 480 D1 720 x 576
normal CIF 360 x 240 CIF 360 x 288
Recording Frame Max. 120 FPS Max. 100 FPS
Compression Format H.264 Technology
Operating system Embedded Linux
Single-tasking Record / Backup
Recording mode Full-time recording
LED indicator Power, recording, GPIO
Buzzer Video Loss
Storage SD Card
Back-up system CarBox Player
Firmware upgrade SD Card
Multi-language English /Simplified Chinese /Traditional Chinese
G-SENSOR Yes
3G-module CDR-E10-3G: USB 3G dongle
CDR-E10-3GA: build-in 3G module
GPS position YES(CDR-E10-3G, CDR-E10-3GA)
Control method IR remote controller
Power supply DC+12V / 500mA (not including Cameras)
Dimension 115mm x 132.7mm x 30mm (W x D x H)
Weight 0.4kg (including SD card)
Operation Temperature -20℃~ +65℃(inside vehicle)
Accessories Standard
Main Machine, 3 Pin Power Cable, Alarm Cable,
3M Extending IR Lead, Remote Control,
Microphone, Driver CD, Quick Guide
★.Build-in 3G: Antenna, 1.5M Extension Antenna
Cord
Optional 3G Module, G-Mouse, SD Card

3
C. Product Appearance
Front
(Without 3G module and 3G USB dongle)
(Build-in 3G module)
Back
(Without 3G module)
(With 3G USB dongle)
SIM Slot
(
with build-in module
)
GPSLight
Recording Light
Power Light
SD card Slot
GPS Power In
Extending IR Lead
A
larm In MIC
3G USB don
g
le

4
(Build-in 3G module)
D. Product Dimension
UNIT:mm
3G Module

5
E. Record / Stop-Record
1.Power on / Record
Insert SD card into slot and then power on the machine, waiting
about 30 seconds after booting completed.
During the DVR booting up, the record indicator will start
flashing as the recording is in progress.
● Green light: light on means power on; light off，means power
off.
● Yellow light: Light off means GPS not ready, light on means
GPS positioning ready.
● Red light: Red Led flashing means DVR is on recording. Red
Led off means No-Record. Red Led flashing quickly means
playback file.
★Remark: When DVR is on playback mode, the DVR will stop
record.
2.Turn off / Stop record
After Power-off, DVR will stop record, you can remove SD card
and plug it to PC to review the file.
GPSLight
Recording Light
Power Light

6
F. System operating instruction
Vehicle DVR can be operated through two methods: IR remote
controller and PC software application.
1. Through IR Remote controller instruction
1.1. As following is the key mapping table for IR Remote
controller：
1.2 DVR OSD menu operation and IR Remote controller key
mapping chart
Main menu page switch
page1/3 setting
page 2/3 setting
page3/3 (with 3G module)
CH2 display
Record
Quad display
Menu
Up、Down、Left、Right
Fast Forward
Stop
Step/Pause
CH1 displa
y
CH3 display
CH4 displa
y
Mute
Enter
Fast Rewind
Pla
y

7
◆IR Remote controller Instruction
(1) Select Item: [up/down/left/right]
(2) Change setting for selected item: [up/down/left/right]
(3) Change setting for Bar item：[Enter]
(4) Full Screen display for each CH: [CH1~CH4]
(5) Open OSD menu, back to previous page：[menu]
(6) Quad display ：[Quad]
(7) Enter playback mode ：[play]
(8) Stop Play/exit playback mode：[Stop]
(9) Suspend recording:[Pause]
System Setup instruction
1. Set Encode Parameter
IR Remote controller operating instruction
(1) Can be selected Resolution/Record frame rate /Recording
quality from up/down key on remote controller.
(2) Left key→Change parameter.
(3) Right key→Back to pervious parameter.
Items Setting
(1) Encode Frame Size (Res.): D1 / CIF
(2) Encode Frame Rate: 5/15/20/25/30
(D1 max. 15 / CIF max. 30)
(3) Encode Quality: Low/Normal/High

8
2. Set Video Parameter
IR remote controller operating instruction
(1) Up/Down key→Select current channel for setup
(2) Left/Right key→Set brightness/contrast/hue for current
channel (Left key→To reduce)/ (Right key→To increase)
Item Setting
(1) Brightness: (Left key→to reduce)/ (Right key→to
increase)
(2) Contrast: (Left key→to reduce)/ (Right key→to increase)
(3) Hue: (Left key→to reduce Hue)/ (Right key→to increase
Hue)
3. Set Time
IR Remote controller operating instruction
(1) Up key→Plus one , Down key→Reduce one.
(2) Left key→Left one space, Right key→Right one space.
4. Set Plate Number