NCORE V1 INSTRUCTION MANUAL
Thank you for your support in our Kickstarter
campaign!
The Ncore waterblock is our first project made by the
crowdfunded by YOU, CNC machine.
As you know this product is designed for extreme
overclockers, with a lot of experience!
Deliding your CPU makes the warranty invalid and can
result in a serious damage or even complete
destruction …
BUT you need to take the risk
If you want to take your CPU to the next level!!
Thank you and good luck!!
Securing sticker- prevents
CPU damage due to
accidental drop during
montage. The Ncore is
very flat at the base, there
is a risk it my stick to the
CPU.)
Distancing stickers
(0.1mm)- allow Ncore
to be used with 9900K
and 10900K INTEL CPU
Shimming Washers
for LGA socket
2x 0,5mm
2x 0.2mm
1x 0,1mm
1. Delid CPU
2. Clean CPU
3. Place a securing
sticker on the CPU
PCB
4. Place distancing
sticker(s). Please refer
to the table and
recommendations on
the website (also
send us email with
information what has
worked best for your
CPU)
9. Place distancing washers if required (refer to the
table and website)
https://nudecnc.eu/ncore/manual
5. Fix the CPU with the
securing sticker (see picture)
6. Cover copper connections
on the top of the CPU PCB
with a nail varnish
7. Apply liquid metal (not
included) onto the CPU
8. Remove base protective
sticker from the Ncore and
wipe with IPA wipes
IMPORTANT!
Please got to our website to find out
how to mount the Ncore and how
many stickers and washers you need!
