NuEyes Mira Cast User manual

NuEyes Mira Cast Solution
*** Please note you must have a smart TV as well as an
internet/Wi-Fi connection.
*** Your Smart TV must be connected to the same Wi-Fi
network as your NuEyes Glasses.
1. Hold down menu button for 30+ Seconds until the admin
menu appears.

2. Scroll down using your finger controller/Bluetooth
Remote to the tab that says “Wi-Fi”; Then click or depress
controller to enter Wi-Fi mode.
3. Select Appropriate Wi-Fi connection

4. Use on board key board to log in.
5. Press back button once (no hold) to Re-enter admin
mode

6. Scroll down using your finger controller/Bluetooth
Remote to the tab that says “display”; Then click or
depress controller to enter display mode.
7. While in display mode scroll down to cast screen and
depress or click on cast screen.

8. When in Cast screen mode press menu button and enable
wireless display.
9. Once Enabled you will see your Smart TV connect to the
NuEyes Glasses.