NUTRIBULLET Magic Bullet User manual

Getting Started: How To Use NutriBullet
New to blending? Or more specifically, new to NutriBullet? You’ve come to the right place! Use
this blog post as your guide to get started.
How to Use Your NutriBullet
Step 1: Unbox Your NutriBullet
Whether you’re rocking a Magic Bullet, Rx, 600, PRO, or Balance, the first step is always the
same. Unbox your Bullet. Take off all the plastic, plug it in, and get yourself and your Bullet
situated.
Step 2: Make a Smoothie, Any Smoothie
Look in your fridge and freezer. What do you have on hand? Let's say you have spinach, a
banana, ice, chia seeds, and almond milk. Start with the leafy greens, then add your fruit, seeds,
and ice. Leave your liquid for last.
Smoothie Making Tips:
Ice should only occupy 25% of the cup, no more than that.
Liquid should always be added last.
Each cup has a "Max" line, don't add any food or liquid above this line. The blade needs
to be able to rotate and extract effectively and going over the Max line can make it hard
for your ingredients to blend evenly. It may even cause leakage, and no one wants that.
NEVER add anything hot or carbonated to your Bullet. This causes pressure to build in
the cup and may result in a mess or damage, so no hot coffee, no hot foods, and no
sparkling water.
Step 3: Blend
You have your smoothie built, now you're ready to blend it! Tightly screw the extractor blade
(the blade your Bullet came with) onto your cup. Make sure it is secure so there are no leaks
during your blend. Then set the cup with the blade attached into the motor base. To lock the cup
in place, twist the cup clockwise while pressing the cup down, this locks it in place and allows
for a hands-free blend.
Keep an eye on your smoothie, it should take 30-60 seconds to blend to the right consistency. If
any ingredients are stuck or if they have stopped moving, twist the cup counterclockwise to stop
it and consider adding more liquid to get everything moving again or shaking the cup to dislodge
“stuck” ingredients. Then lock the cup back into place and continue blending.

Once your smoothie looks well blended , stop the Bullet by twisting the cup counterclockwise.
The cup will pop up, the motor will stop, and your smoothie will be ready!
Step 4: Drink Your Smoothie
Remove the blade, screw on the lip ring to cover the grooves on the cup and sip that smoothie!
It’s that simple. Taking your smoothie on the go? Screw on a flip top to-go lid and head out the
door.
Step 5: Clean Up
Cups are dishwasher safe on the top rack but blades need to be hand washed. Gently wash the
blade with hot water and a sponge being cautious, it is a blade after all.
If your motor base needs cleaning, use a cloth to wipe it off but remember to first unplug your
Bullet. If it needs a more thorough cleaning, use warm soapy water and a toothbrush to scrub
inside. Wipe it clean and allow it to air dry before using again.