NUTRIBULLET Select User manual

User guide
®
SELECT

2
GENERAL SAFETY
INFORMATION
• This appliance shall not
be used by children.
Keep the appliance
and its cord out of
reach of children.
Children shall not play
with the appliance.
 NEVER LEAVE
THE nutribullet®
UNATTENDED WHILE
IT IS IN USE
 DO NOT USE
OUTDOORS
 ALWAYS TURN THE
nutribullet®OFF WHEN
NOT IN USE
• Always disconnect the
appliance from the
power supply if it is
left unattended and
Important safeguards
Warning! To avoid the risk of serious injury, carefully
read all instructions before operating your nutribullet®.
When using any electrical appliance, basic safety
precautions should always be observed, including
the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
!
before assembling,
disassembling or
cleaning.
• Switch o the appliance
and disconnect
from supply before
changing accessories
or approaching parts
that move in use.
• Appliances can be used
by persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction
concerning use of the
appliance in a safe way
and if they understand
the hazards involved.
•
Do not use this
appliance for anything

3
but its intended use.
Misuse may result in
personal injury.
HEAT & PRESSURE
SAFETY
• Always use extreme
care and attention when
using hot ingredients in
any blending product,
as the friction from the
rotating blades (during
the blending process)
combined with the
thermal energy of the
heated ingredients can
create a dangerous
situation if not properly
controlled.
• Caution must be
observed if hot liquid is
poured into the blender
as it can be ejected out
of the appliance due to
sudden steaming.
BLENDING WITH
nutribullet®CUPS:
To avoid personal
injury,never blend
hot ingredients or
liquid in any sealed
nutribullet®cup!
Heated ingredients
can pressurize sealed
containers when
agitated and cause cup
and blade separation
or violently expel hot
contents upon opening.
Always start the
blending process with
room temperature or
refrigerated ingredients
and liquids (21°C/70°F
or cooler).
Never continuously
operate for longer than
necessary to create
your recipe — generally
less than one minute.
Blade friction from
prolonged operation
can heat ingredients
and generate internal
pressure in the sealed
container. This pressure
can cause the cup
and blade to separate
or blended contents
to erupt from the
container, resulting
in possible personal
injury and/or property
damage. If the sealed
nutribullet®cups are
warm to the touch,
power o your machine
and allow the vessel to
cool for fifteen minutes
or more. Allow contents
to settle before slowly
WARNING!
WARNING!

4
releasing the cup from
the motor base. With
the nutribullet®cup,
pointed away from your
face and body, slowly
unscrew the easy-twist
extractor blade
to gently release any
residual pressure.
If you need to blend for
longer than one minute,
blend for 1-minute
intervals. After each
1-minute interval, allow
the motor base to shut
o completely and wait
at least one minute
before starting the next
cycle. Do not run for
more than 3 consecutive
1-minute intervals to
prevent the contents
from overheating. Allow
contents to settle for 2-3
minutes after the third
blending cycle to prevent
overheating and buildup
of pressure.
Sugar in fruits and
vegetables can ferment
over time, releasing
gases that cause
pressure to build up in
a sealed nutribullet®
cup. Do not store
any smoothies or
blended mixtures in
vessels sealed with the
easy-twist extractor
blade. If you will not
consume your smoothie
immediately, remove
the easy-twist extractor
blade and cover your
nutribullet®cup with
plastic wrap before
refrigerating. If your
smoothie or blended
mixture was made in
the pitcher, transfer
to another storage
container before
refrigerating. Never
store any blended
mixture in a sealed cup
unrefrigerated, or for
any prolonged period of
time; contents will spoil
and ferment, producing
gases that might cause
eruption.
Never blend carbonated
liquids, reactive,
or eervescing
ingredients (e.g., baking
soda, baking powder,
vinegar, cirtric acid,
yeast, etc.). Pressure
from released gases can
cause a sealed blending
container to burst or
separate, resulting in
WARNING! WARNING!

5
possible injury and/or
property damage.
BLENDING WITH THE
PITCHER:
Use extra caution when
blending hot liquids in
the pitcher.
Never turn the power on
while using the pitcher
without the vented lid cap
inserted and locked into the
pitcher lid, as ingredients
can splash, and if hot or
warm, could potentially
cause thermal injury and/
or property damage.
Steam and splattering
ingredients can escape
through the pitcher lid,
potentially scalding
and/or burning the user.
NEVER blend hot liquids
in your pitcher without
the pitcher lid and
vented lid cap locked
into the pitcher lid and
attached. The vented
lid cap allows steam
and pressure to escape,
while guarding against
excess splashing.
NEVER blend hot liquids
in your nutribullet®
cups or any other
sealed vessel.
When blending hot
liquids, add liquid
and solid ingredients
to your pitcher below
their respective MAX
lines. Attach the pitcher
lid with the vented
lid cap inserted and
locked. Press POWER
and begin blending
on the LOW setting.
Once ingredients are
integrated, increase
speed as needed.
If the nutribullet®blends
for longer than one
minute, friction from
the blades can cause
ingredients to heat
and generate internal
pressure inside the
vessel. If a blending
vessel becomes warm
to the touch, turn o the
machine and allow the
vessel to cool completely
before carefully opening,
pointed away from your
body to avoid injury.
WARNING!
WARNING!

6
BLADE SAFETY
Never store any easy-twist
extractor blade in the
motor base unattached
to a nutribullet®cup. An
exposed blade can present
a laceration hazard.
Blades are sharp!
Handle carefully. Use
care when handling
any blade. To avoid
laceration injury, do
not handle or touch
any blade edge.
Caution must be
observed when
emptying vessels and
during cleaning.
AVOID CONTACT WITH
MOVING PARTS! Keep
hands and utensils
out of and away from
blades while blending
food to reduce the
risk of severe personal
injury.
• TO REDUCE THE RISK OF
PERSONAL INJURY OR
PROPERTY DAMAGE,
make sure the easy-
twist extractor blade is
securely twisted (hand-
tightened) onto the
nutribullet®blending
vessel before placing
it on the motor base
and operating the
nutribullet® Select.
Check to make sure the
easy-twist extractor
blade is aligned
properly before placing
it on the motor base
and operating your
nutribullet®Select.
• After blending, turn the
power blending vessel/
easy-twist extractor
blade assembly from
the motor base until the
motor comes to a full
stop and the unit powers
down completely. Taking
the blending vessel o
the unit prior to complete
power down can cause
damage to the easy-
twist extractor blade
coupling or motor gear.
Never use the nutribullet®
Select without adding
liquid, as doing so may
damage the blades.
• The cyclonic action®
of your nutribullet®
Select requires the
use of liquids to make
smoothies and other
nutritious items. The
nutribullet®Select is
not intended to be
WARNING!

7
used without liquids,
or as an ice crusher.
ALWAYS ADD LIQUID
to your recipe.
• DO NOT USE the easy-
twist extractor blade for
grinding dry ingredients
such as grains, cereal,
or coee, as this may
damage the motor
and/or the easy-twist
extractor blade.
• We recommend
replacing your easy-twist
extractor blade every
6 months (depending
on use) or as needed for
optimal performance.
PITCHER SAFETY
Ensure the easy-twist
extractor blade is
securely fastened to
the pitcher base before
blending. Failure to
properly align the blade
and pitcher attachment
can cause liquid to
leak out of the base,
potentially causing the
components to separate
during blending. This
can result in damage to
the machine, damage
to property, and/or
personal injury.
• With recipes that require
certain ingredients to
be incorporated during
blending, first add the
base ingredients, seal the
pitcher lid with vented
lid cap attached, and
begin blending. Then,
once the ingredients are
well mixed, twist open
the vented lid cap and
carefully pour or drop
ingredients into the
mixture.
• If you need to push
ingredients closer to the
blade, ONLY USE THE
TAMPER PROVIDED
with the nutribullet®
Select. DO NOT use any
utensil or apparatus
other than the tamper to
push ingredients toward
the blade. The tamper
is specifically designed
not to come in contact
with the blade. Spatulas,
spoons and other tools
can make contact with
the blade, which may
result in damage to the
machine, damage to
property, and/or possible
injury.
• NEVER USE YOUR
FINGERS OR ANY PART
OF YOUR HAND TO

8
PUSH INGREDIENTS
DOWN TOWARD THE
BLADE. Only use the
provided tamper.
Remember to use extra
caution when blending
hot liquids or ingredients
in the pitcher.
• Spray or escaping
steam may cause
burns and/or property
damage.
• Do not fill container
above the maximum
capacity lines indicated
for liquids and solid
ingredients.
• Always begin blending
hot ingredients on the
LOW setting.
• Keep hands and other
exposed skin away from
lid opening to prevent
possible burns.
ELECTRICAL SAFETY
Do not use this product
in locations with
dierent electrical
specifications or plug
types. Do not operate
with any type of plug
adapter or voltage
converter device,
as these may cause
electrical shorting,
fire, electric shock,
personal injury, or
product damage.
• The use of attachments,
including canning jars,
is not recommended
and may cause fire,
electric shock, personal
injury, or product
damage and will void
the product’s warranty.
• To avoid the risk of
electric shock, never
immerse the cord, plug,
or motor base of the
nutribullet® Select in
water or other liquids.
Discontinue use if the
cord, plug, or motor
base is damaged.
• Always POWER OFF
and UNPLUG the
nutribullet®Select
when it is not in use or
BEFORE assembling,
disassembling,
changing accessories,
or cleaning. Do not
attempt to handle the
nutribullet®Select
until all parts have
stopped moving.
• Do not allow the cord
to hang over the edge
of the table or counter.
Do not pull, twist, or
WARNING!

9
damage the power
cord. Do not allow
the cord to touch hot
surfaces, including
the stove.
• If the motor stops
working, unplug the
motor base and let
it cool for at least
15 minutes before
attempting to use it
again. Your nutribullet®
Select has an internal
thermal breaker that
shuts o the motor when
it overheats. The thermal
breaker will reset when
the unit is unplugged,
and the thermal breaker
cools down suciently.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a
circuit that is regularly
switched on and o
by the utility.
STOVETOP
HEATING SAFETY
Do not blend hot
ingredients in any sealed
nutribullet®cup!
To heat items that have
been blended at room
temperature or cooler
(21°C/70°F or less),
transfer mixture to a
stovetop pot to heat. Use
a thermometer to test
the internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be
hot inside.
The nutribullet®Select
is not intended for use
on the stove top. Do
not place the motor
base or any nutribullet®
accessory on the
stove or microwave
or immerse in boiling
water. This may result
in damage to the
accessory.
WARNING!
WARNING! WARNING!

10
VENTILATION WARNINGS
To prevent a fire
hazard, power base
openings (underneath
the motor base)
should be free of
dust and lint and
never obstructed with
flammable materials
such as newspapers,
tablecloths, napkins,
dishtowels, place mats
or other similar type
materials.
• CAUTION! Always
operate the nutribullet®
Select on a level surface,
leaving unobstructed
space beneath and
around the motor
base to permit proper
air circulation. Vents
on the bottom of the
product are provided
for ventilation to
ensure reliable motor
operation and to prevent
overheating.
MEDICAL SAFETY
• The information
contained in this User
Guide or Recipe Guide is
not meant to replace the
advice of your physician.
Always consult your
physician regarding
health and nutrition
concerns.
MEDICATION
INTERACTIONS:
• If you are taking any
medication, especially
cholesterol-lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers,
or antidepressants,
please check with your
physician before trying
any of the recipes
contained in this guide
or the recipe guide.
• Avoid blending the
following seeds and
pits in the nutribullet®
Select, as they contain
a chemical known to
release cyanide into the
body when ingested:
apple seeds, cherry pits,
plum pits, peach pits,
and apricot pits. Fruit
pits may also cause
damage to the pitcher.

11
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• Do not place any of the
nutribullet®Select parts
in a microwave, oven,
or in a stovetop pot, or
immerse in boiling water,
as this may result in
damage to the part.
• TO AVOID LEAKAGE, DO
NOT OVERFILL THE
BLENDING VESSELS!
The pitcher is marked
with two MAX lines: one
for solid ingredients
(higher line) and one
for liquid ingredients
(lower line). Your
nutribullet®cups are
also marked with a MAX
line. When filling the
blending vessels, make
sure your ingredients
do not exceed their
respective MAX lines.
Exceeding the indicated
MAX lines can result
in leakage, and may
lead to dangerous
pressurization.
• Blending vessels and
easy-twist extractor
blades are specific
to the exact model of
nutribullet®Select
you possess. Use of
incompatible parts
(parts from other
models) may result
in damage to your
nutribullet®Select or
create safety hazards.
When ordering
replacement parts
(nutribullet®cups,
pitcher, easy-twist
extractor blades) on
nutribullet.com or via
customer service, please
specify the machine
model to ensure you
receive parts that are
compatible with your
unit.
• Periodically inspect
all nutribullet®Select
components for damage
or wear that may impair
proper function or
present an electrical
hazard. Make sure that
the power cord and
plug are undamaged.
Discontinue use and
replace blending
vessels if you detect
cracking, cloudiness,
or damage to the
plastic. Ensure that the
blades rotate freely
and that the structure is

12
undamaged. Make sure
that the motor base is
unobstructed and clean.
Follow maintenance
recommended in the
User Guide and never
operate your nutribullet®
Select with damaged
components. If your
nutribullet®Select
malfunctions in any way,
immediately discontinue
use and
contact
customer service.
You
may purchase new
nutribullet®cups,
pitchers, and easy-
twist extractor blades
at nutribullet.com or
by contacting customer
service.
Save these
instructions!
If you have any comments,
questions, or concerns,
please go to nutribullet.com.
!

13
®
SELECT

14

15
Contents
16 What’s included
17 Assembly guide
18 Getting started
18 Safety guide
18 Pitcher assembly & use
22 nutribullet®cup assembly & use
24 Blending control panel
25 How to use the blending control panel
26 Care & maintenance
26 How to clean the nutribullet®
28 How to store
28 Replacement parts
Thank you for purchasing the nutribullet® Select.

16
What’s included
900 mL pitcher
tamper
pitcher lid with
vented lid cap
motor base
700 mL
handled cup to-go lid
easy-twist
extractor blade

17
Assembly guide
nutribullet®
cup
vented lid cap
pitcher lid
pitcher
tamper
easy-pour spout
blending control
panel
motor base
suction cup feet
easy-twist
extractor blade

Use extra caution when
blending hot liquids in
the pitcher.
Steam and splatters can escape
through the vented lid, potentially
causing scalding and/or burns.
NEVER blend hot liquids in your
pitcher without the pitcher lid
and vented lid cap attached. The
vented lid cap is ventilated to allow
steam and pressure to release,
while guarding against excess
splashing. NEVER blend hot liquids
in your Nutribullet cups or any
other sealed vessel.
When blending hot liquids, add
liquid and solid ingredients to your
pitcher below their respective
MAX lines. Attach the pitcher lid
with the vented lid cap inserted.
Press the POWER icon, then begin
blending on the LOW setting. Once
ingredients are integrated and
the mixture is level (no splashing),
increase speed as needed.
PLEASE KEEP THESE
IMPORTANT SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
• Make sure the base is plugged in
for use.
•DO NOT attempt to operate the pitcher
on the appliance without attaching
the pitcher lid and vented lid cap.
• Never run the appliance while empty.
• Appliance accessories are not
intended to be used in the microwave
as it may damage the accessories.
• Never leave the appliance
unattended while in use.
Never blend hot ingredients
when using any sealed
nutribullet®cups.
Heated ingredients can pressurize
sealed containers when agitated
and violently expel hot contents upon
opening. Always start the blending
process with room temperature or
refrigerated ingredients and liquids
(21°C/70°F or cooler).
WARNING!
WARNING!
Getting started
Pitcher assembly
& use
1Review all warning and
caution statements in the
Important Safeguards
section (pg 2-12) and
on the previous page before
proceeding to Step 2.
2Place the motor base on
a clean, dry, level surface
such as a counter or table.
18

19
Place the pitcher onto the
motor base and gently twist
clockwise so it locks in place.
When you hear the click, it’s
locked and ready to blend.
NOTE: If you are left-handed, place
the handle facing towards the center
of the blending control panel and
twist clockwise.
Twist the easy-twist
extractor blade onto the
base of the pitcher, making
sure the components are
properly aligned and
securely fastened.
6
3
4
Place the pitcher on a
clean, dry, level surface
such as a counter or table.
Add the ingredients to the
pitcher, making sure they do
not exceed the MAX line.
NOTE: The blending pitcher is
marked with two MAX lines: one for
solid ingredients (higher line) and
one for liquids (lower line). When
filling the blender, make sure your
ingredients do not exceed their
respective MAX lines.
5
Place the pitcher lid with
vented lid cap attached on
the pitcher, making sure it’s
aligned to the handle.

20
If the ingredients stick to
the side of the pitcher,
press POWER to stop the
appliance and wait for the
blade to stop turning. Then
remove the pitcher lid and
use the tamper to dislodge
the ingredients. When
finished, replace the lid and
continue blending. If the
ingredients continue to stick,
consider adding more liquid.
7
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
9
8
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons illuminate while in use.
NOTE: Proceed to the blending
control panel chart on page 24
for speed definitions.