NUTRIBULLET IMMERSION BLENDER User manual

User guide.

3
PERSONAL SAFETY
BLADES ARE SHARP! HANDLE
CAREFULLY. Use care when
handling any blade. To avoid
laceration injury, do not
handle or touch any blade
edge. Always hold the S-blade
by its upper plastic part.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and
away from the attachments
(especially the blade or whisk)
while blending food to reduce
the risk of severe personal
injury.
Never continuously operate
for longer than necessary to
create your recipe — generally
less than one minute.
Important safeguards &
cautionary information.
Warning! To avoid the risk of serious injury, carefully
read all instructions before operating your NutriBullet®.
When using any electrical appliance, basic safety
precautions should always be observed, including
the following important information.
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder, yeast,
etc.). Pressure from released
gases can cause a sealed
NutriBullet® container (such
as the chopper container) to
burst, resulting in possible
injury and/or property
damage. Blade friction from
prolonged operation could
heat ingredients and generate
internal pressure in the sealed
chopper container.
Caution must be observed if
hot liquid is poured into the
product (food processor or
blender) as it can be ejected
out of the appliance due to
sudden steaming.
WARNING!
WARNING!
Save these instructions!
FOR HOUSEHOLD USE ONLY
!

4
While unlikely, friction from
the rotating blade when using
the chopper can potentially
cause ingredients to heat and
generate internal pressure in
the sealed chopper container,
if permitted to run for longer
than a minute. If the container
is warm to touch allowit to cool
completely before carefully
opening, pointed away from
your body to avoid injury.
Make sure the blending arm is
completely submerged down
in your mixture to prevent
splattering. Never blend
near the top of your mixture,
especially if you are blending
hot ingredients so as to avoid
thermal injuries.
After chopping, allow the
contents to settle and release
any pressure that may have
built up during the chopping
process. As you detach the
chopper from the motor body,
have the container pointed
away from you in case there is
any built-up pressure.
Keep hands, hair, clothing,
as well as spatulas and
other utensils away from the
attachments during operation
to reduce the risk of injury to
persons or damage to the
product.
To reduce the risk of injury,
never place cutting blade on
base without first putting bowl
properly in place.
Be certain cover is securely
locked in place before
operating appliance.
Always make sure that your
NutriBullet®is unplugged
before you attempt to remove
or attach the blending arm.
After you have finished
blending, always turn- o
your blender and wait until the
motor comes to the complete
stop before removing the
blending arm from the mixture,
especially if the mixture is hot
so as to avoid thermal injuries.
This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory,
or mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised and
instructed concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
Do not use outdoors.

5
Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. The cord is not
suitable for replacement.
The use of third-party
attachments, including canning
jars, is forbidden and may cause
fire, electric shock, personal
injury, or product damage and
will void the warranty.
To avoid risk of electric shock,
never immerse the cord,
plug, or motor unit of blender
in water or other electrical
current conducting liquids.
Avoid blending the following
seeds and pits in the
NutriBullet®, as they contain
a chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits, and
apricot pits. Fruit pits may also
cause damage to the blade
and other attachment parts.
The information contained in
this user guide is not meant
to replace the advice of your
physician. Always consult
your physician regarding
health and nutrition concerns.
If you are taking any
medication, especially cholesterol
lowering medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the recipes
contained in this guide.

6
PRODUCT SAFETY
Always unplug the NutriBullet®
when not in use.
To prevent possible separation
of components during operation,
you must properly align,
securely attach (hand tighten),
and fully lock attachments to
the motor body, and check for
separation before operating
your NutriBullet®.
Once you are done using your
NutriBullet®, wait until the
motor comes to a complete
stop and the unit powers down
completely before removing any
attachment from the motorbody.
Taking the chopping container
o the unit prior to complete
power down can cause damage
to the S-blade coupling or other
parts.
Never blend using the blending
arm without at least some
liquid, as doing so may damage
the blade or motor. When using
the Food Chopper attachment
you may chop dry ingredients.
In most cases, your NutriBullet®
requires the use of liquids to
blend or whisk ingredients
properly. Avoid blending food
without at least one liquid
ingredient.
DO NOT USE the blending arm,
for grinding dry ingredients such
as grains, cereal, or coee, as
this may damage the motor, the
blade, the whisk, or the chopper.
Always UNPLUG the NutriBullet®
when it is not in use or BEFORE
assembling, disassembling,
changing accessories, or
cleaning. Do not attempt to
handle the NutriBullet®until all
parts have stopped moving.
Switch o the appliance and
disconnect from power supply
before changing accessories or
handling moving parts.
To unplug, grasp the plug and
pull from the outlet. Never pull
from the power cord.
Do not operate any appliance
with a damaged cord or
plug or after the appliance
malfunctions, or is dropped or
damaged in any manner.
If the supply cord is damaged, it
must be replaced by a qualified
electrician in order to avoid a
hazard.
Discontinue use if the cord,
plug, or motor unit is damaged
Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do not

7
allow cord to touch hot surfaces,
including the stove.
Periodically inspect all
NutriBullet®components for
damage or wear that may impair
proper function or present an
electrical hazard. Assure that
the power cord and plug are
undamaged. Discontinue use
and replace NutriBullet®cup if
you detect cracking, crazing,
cloudiness, or damage to the
plastic. Assure that the blades
rotate freely. Never operate
your NutriBullet®with damaged
components. If your NutriBullet®
malfunctions in any way,
immediately discontinue use.
If the motor stops working and
feels hot, unplug the appliance
and let it cool for an hour before
attempting to use it again. Your
NutriBullet®has an internal
thermal breaker that shuts o
the motor when it overheats.
The thermal breaker will reset
when the unit is unplugged and
the thermal breaker cools down
suciently.
CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on and
o by the utility
Never place your NutriBullet®on
top of flammable materials such
as newspapers, tablecloths,
napkins, dish towels, place
mats, or other similar types of
materials.
Do not place any NutriBullet®
parts in the microwave or
oven. Only the Blending Arm
attachment or Whisk attachment
may be immersed in liquid or
used on the stove top, but always
keep the motor body dry.
To avoid leakage or spillage,
do not overfill the cup or bowl!
DO NOT EXCEED THE MAX LINE.
Make sure to always allow
room, at least 100mm, at the top
of whatever container you are
blending in. The blending action
of the NutriBullet®Immersion
Blender requires space to
blend, whisk, or chop eectively
blending in a full container can
result in leakage or spillage.
Remove whisk from the product
before washing.
Periodically inspect all
NutriBullet®components for
damage or wear that may impair
proper function or present an
electrical hazard. Make sure

8
that the power cord and plug are
undamaged. Discontinue use
and replace blending vessels if
you detect cracking, cloudiness,
or other damage to the vessel,
or damage to the motor unit,
motor body, or any attachments.
Ensure that the blades or whisk
rotate freely and that the
structure is undamaged. Follow
the recommended procedures
in the Care and Maintenance
section of this guide, and never
operate your NutriBullet®with
damaged components.
If your NutriBullet®malfunctions
in any way, immediately
discontinue use.We recommend
replacing your cup every six
months.
Attachments and accessories
are specific to the exact model of
NutriBullet®. Use of incompatible
parts (parts from other models)
may result in damage to your
NutriBullet®or create safety
hazards. When replacing cups
or blades or ordering additional
attachments or accessories
from www.bulletbrands.com.
au / www.bulletbrands.co.nz
or by contacting Customer
Service: (AU: 1300 285 538 /
NZ: 0800 232 633).
!If any of the contained
instructions or warnings
are not understood, please
contact NutriBullet®Customer
Service for assistance at
www.bulletbrands.com.au
/ www.bulletbrands.co.nz.
Or call the Customer Service
team at: 1300 285 538 (AUS) /
0800 232 633 (NZ).

9

10

11
Contents.
Thank you for purchasing the NutriBullet® Immersion Blender.
03 Important safeguards
12 What’s included
13 Assembly guide
14 Before first use
14 Assembly
16 Usage instructions
16 Overview
19 Using the blending arm
22 Using the whisk
24 Using the chopper
26 Disassembly
27 Blending tips
28 Troubleshooting
29 Care and maintenance
30 How to store
30 Replacement parts
31 Recipes

12
What’s included.
900 ml cup & lid
chopping blade
600 ml chopping
bowl & lid
motor body 20 cm blending arm
whisk
& whisk holder

13
Assembly guide.
600 ml chopping
bowl
900 ml cup & lid
chopping bowl lid
variable speed dial
low & high speed
buttons
motor body
20 cm blending arm
whisk holder
whisk
chopping blade

14
Assembly.
1Before starting assembly,
make sure that the
appliance is unplugged.
2Attach one of the
Immersion Blender
accessories (blending arm,
whisk, or chopping bowl)
onto the bottom of the
main motor body:
2aBLENDING ARM: Insert the
bottom of the motor body
into the top of the blending
arm; push the motor body
down and turn it clockwise
until it locks.
Getting
started.
WARNING: Never submerge
the motor body in water or
any other liquid.
Before using your blender for the
first time, please take a moment
to perform the steps below
1 UNPACK: Open box. Remove
blender and attachments. Place
all parts on a flat dry surface.
2 CLEAN: Rinse all detachable
parts and accessories (except
the motor body and chopping
bowl lid) with warm, soapy
water. Dry. Clean the motor
body and chopping bowl lid
with a damp cloth.

15
2bWHISK: Insert the top of the
whisk into the bottom of the
whisk holder. Then insert the
bottom of the motor body
into the top of the whisk
holder, pushing the motor
body down and turning
clockwise until it locks.
2cCHOPPER: Place S-blade
onto center pin of chopping
bowl. Press down on blade
and lock it in place.
WARNING: Blade is sharp! Handle
carefully. Always hold it by the
upper plastic part.
Attach top of chopping
bowl lid to bottom of motor
body; turn motor body
clockwise until it locks.
After loading food into
chopping bowl, place
chopping bowl lid onto top
of chopping bowl and lock it
in place.

16
Usage instructions:
overview.
1Prepare foods for blending;
make sure only blendable
foods are used.
• Remove any hard seeds,
pits, and skin – for
example, peel, pits, and
rind should be removed
from oranges, lemons,
grapefruits, and melons.
• Cut foods into smaller
pieces if needed.
• Do not attempt to process
overly thick or hard foods
(since these may damage
the motor or blade).
• Do not blend hard fruits or
vegetables without liquid.
2Place mixing vessel (cup,
cooking pot, mixing bowl
or chopping bowl) on flat,
dry surface.
3Put food and/or liquid
into cup, mixing bowl,
or chopper. If using the
measuring cup included
in your set, DO NOT
exceed the MAX fill line.
4Make sure your selected
attachment is tightly
fastened to the bottom of
the motor body and locked
in place. (See Assembly
section.). The blender is
now ready to operate.

17
5Carefully submerge the
blending arm or whisk
into the mixing vessel with
ingredients that you wish
to mix or blender. Do not
depress the power button
before putting the blending
arm into the mixing vessel
as it will cause splattering.
Also, do not blend near the
top of your mixture so as to
prevent splattering.
6Press and hold the Low-
speed (I) or High-speed
(II) Power Button to
operate unit. If desired,
fine tune blending speed
by the variable Speed Dial
while pressing the Low-
Speed button.
Before pressing either
Power Button, you can finely
adjust the speed by turning
the Variable Speed Dial
and then pressing the
Low-Speed button.

18
Pressing either power
button activates the motor.
Releasing the button stops
the unit. The button must
be depressed continuously
for blending operation
to continue.
Once the motor is activated,
the attachment will start
turning and processing your
food/liquid.
CAUTION: Do not operate the
unit for long periods of time
without blending any ingredients.
CAUTION: Do not put fingers,
palms, utensils, or foreign
objects on or near attachment
during operation.
NOTE: The Variable Speed
Dial may only be used when
pressing the Low-speed button.
7When you are done, release
the power button to shut o
the blender.
CAUTION: Wait until the motor
comes to a complete stop before
removing the blending arm from
the mixture, especially if the mixture
is hot so as to avoid splatter and
thermal injuries.
8Place the motor body and
attachment safely on the
counter (or other flat, dry
surface).
9If you have no more food
items to process, unplug the
blender and enjoy your food/
beverage, or store it for later.
10 Clean the motor body and
attachments as soon as
possible to avoid residue
buildup; disassemble and
store unit safely.

19
Using the blending arm.
The blending arm is perfectly suited for preparing a wide range of
dishes, such as dips, sauces, soups, condiments, milkshakes, even
baby food — as well as for many other mixing needs. For best
results, always include one or more liquid ingredients.
1Place mixing vessel (cup,
cooking pot, or mixing bowl)
on flat, dry surface. Make sure
your selected attachment is
tightly fastened to the bottom
of the motor body and locked
in place. (See Assembly
section.). The blender is now
ready to operate.
2Place the prepared food
and/or liquid into your
mixing vessel, without
forcing items in and
without overfilling.
CAUTION: Do not blend too much
food or liquid at one time. Don’t
overfill cup or bowl. If using the
measuring cup included in your set,
DO NOT exceed the MAX fill line.
3Place the blending arm
into the mixing vessel
containing the items you
wish to blend.
NOTE: Do not place blender in
cup or bowl at an angle. Make
sure blender is fully upright.
CAUTION: Do not press the
power button before placing the
blending arm into the container
as it will cause splattering.

20
4Press and hold the Low-
speed (I) or High-speed
(II) Power Button to
operate unit. If desired,
fine tune blending speed
by turning the Variable
Speed Dial while pressing
the Low-Speed button.
Before pressing either speed
button, you can finely adjust
the speed by turning the
Speed Dial and then pressing
the Low-Speed button.
NOTE: The Variable Speed Dial
may only be used when pressing
the Low-speed button.
Pressing either speed
button activates the motor.
Releasing the button stops
the unit. The button must
be depressed continuously
for blending operation
to continue.
CAUTION: Do not operate the
unit for long periods of time without
blending any ingredients.
CAUTION: Do not put fingers,
palms, utensils, or foreign
objects on or near attachment
during operation.