NUTRICHEF NCHUB13 User manual

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]

www.NutrichefKitchen.com2
SAFETY PRECAUTIONS
When using an electrical appliance, basic safety precautions should always be
followed, including the following:
1. It is very important to read Instruction Manual carefully before use.
2. Please carry or handle this Hot Water Dispenser using the built-in carrying handle.
3. Do not place on or near other high temperature appliances.
4. Do not immerse power cord, or Hot Water Dispenser body in water or other
liquids for fear of electric shock.
5. Keep this Hot Water Dispenser out of children's reach during use.
6. Make sure to unplug power cord from the Water Dispenser when cleaning the
Hot Water Dispenser.
7. Do not use if power cord is frayed, damaged or the Hot Water Dispenser operates
abnormally. Send this Hot Water Dispenser to the nearest authorized repair
facility for inspection, adjustment or repair. Do not attempt to disassemble or
repair.
8. It is not recommended to use tools other than what are included with this Hot
Water Dispenser.
9. This Hot Water Dispenser is for indoor use only.
10. Do not suspend power cord o the edge of tables or countertops for fear of
injury resulting from overturning the Hot Water Dispenser.
11. Keep this Hot Water Dispenser away from hot surfaces, stoves and baking ovens.
12. This Hot Water Dispenser operates using only 120V AC.
13. Make sure that exterior/interior of the Hot Water Dispenser is clean and free of
foreign material.
14. Do not place hands close or touch the steam vent for fear of burns resulting
from high temperature steam released in the course of boiling water.
15. Do not boil more water than the maximum amount allowable.
16. Use damp cloth or sponge for cleaning Hot Water Dispenser.
Never use metal or abrasive scrubbers.
17. Do not use this Hot Water Dispenser for purposes other than what is intended.
18. Always use caution when there is hot water present in the Hot Water Dispenser.
19. Do not suddenly change the temperature of the inner metal lining.
For example, adding ice into boiling water.
20. Do not touch the bottom heating area until it cools down.
Please keep this Instruction Manual for future reference.
www.NutrichefKitchen.com 3
INTRODUCTION
The Nutrichef Digital Hot Water Dispenser is tailored for making hot water
available 24/7. With the new emphasis on “Healthy Living-Healthy Life“, many
people are adding hot tea to quench their thirst.
Today, as people are exposed to more and more chemicals and heavy metals in
their environment, they are developing certain sensitivities to them. From these
sensitivities, awareness and fears of using non-stick coated cookware are ever
increasing. Taking this into consideration, along with the pursuit of healthier
living, our company has developed and manufactured the Nutrichef Digital Hot
Water Dispenser. We believe our Hot Water Dispenser, free of chemicals and
heavy metals, promotes a healthier stress free living.
FUNCTIONS
The Nutrichef Digital Hot Water Dispenser is tailored for people who lead a busy,
active lifestyle, and are also health conscious. This Hot Water Dispenser will boil water
and can keep warm at three dierent temperatures.
Keep warm at 208°F; good for tea, instant coee and other instant drinks, at 185°F;
energy saving and it is the default keep warm temperature setting, and 149°F;
good for Japanese Green Tea or Baby Formula.
It also comes with a Stand-by function for extended energy saving when you will
not use the Hot Water Dispenser for a long period of time, such as when you are
asleep.
SPECIFICATIONS
Model Voltage Frequency Power Capability
NCHUB13 120V 60 Hz 750W 3.0 Liter
NCHUB24 120V 60 Hz 750W 4.0 Liter
NCHUB35 120V 60 Hz 750W 5.0 Liter

www.NutrichefKitchen.com4
MAIN PARTS DIAGRAM
CONTROL PANEL
www.NutrichefKitchen.com 5
DIRECTIONS
Pay attention to the following before use:
1. Preparation prior to rst operation.
Take out Nutrichef Digital Hot Water Dispenser, Power cord, Instruction manual
and warranty from the packing box.
• Fill out the warranty card and mail it back to our Company for registration and
one year after-sales service. Your rights and benets will only be guaranteed if
we receive your completed warranty.
• Put aside packing materials and box for future storage and transport.
• Please read Instruction Manual carefully for proper use of this kettle.
• Do not plug power cord in outlet prior to being ready to use.
• Make sure interior and exterior of the kettle is dry and clean before pouring
water into this kettle (Filtered Water is recommended for boiling in this kettle).
2. Press “TEMP SET” Button to select your desired keep warm temperature.
3. The Nutrichef Digital Hot Water Dispenser is designed to boiling water hand
keep warm 24/7 for your convenience. Do not use this kettle for anything other
than heating water.
4. The Nutrichef Digital Hot Water Dispenser is characterized by its ease of
operation and convenience. Enjoy!
HOW TO USE
1. Open Lid to Pour Water
NOTE: Filtered Water is recommended for boiling in this Hot Water Dispenser
• Do not spill water outside of this kettle.
• Close the lid after pouring water.
• Please do not over ll water pass the
Max Water Level. It might cause overow
during boiling
Water GaugeREFILL LEVEL
Keep Warm Temperature Indicators
Boilding
Indicator
Stand-By
Indicator
Keep Warm
Temperature
Set Button
Re-boil Button
(De-chlorinate)
Unlock Indicator
Hot Water
Dispensing
Button
Unlock
Dispense
Button

www.NutrichefKitchen.com6
2. Plug in the Power Cord to start boiling
1. Connect Power Cord to Hot Water Dispenser.
2. Plug Power Cord to the power outlet.
After connect to the outlet, the“BOILING“ indicator lights up and water starts to
boil automatically till reaching boiling temperature of (212°F).
3. When Water is boiling, the Hot Water Dispenser will switch in to keep warm
mode. The Defaul (or customer select) Temp idicator of 185°F lights up.
• Hot Water Dispenser will re-boil again if the water temperature drops below
the set temperature level.
• If Hot Water Dispenser do not boil automatically, press “RE-BOIL” button to
boil water.
4. Each time the“TEMP SET“ button is pressed, the keep warm temperature
indicator will switch by following sequence; 185°F -> 208°F-> 149°F -> 185°F ->
3. TWO WAYS TO DISPENSE HOT WATER
1. Press "UNLOCK" button, the unlock light is on.
(Hot Water Dispenser will auto lock if idle for 10 seconds.)
www.NutrichefKitchen.com 7
2. Push Button Dispensing: Press "DISPENSE" button to dispense hot water into cup.
Cup Touch Dispensing: Holding cup up to touch the cup switch behind the
spout to dispense hot water into cup.
NOTE:
After water has boiled without dispensing for a period. Some air might become
trapped in the water pump to prevent pumping water. Simply open then close
the lid to solve this issue.
4. STAND-BY FUNCTION
1. During water boiling, press "RE-BOIL" button once, kettle will turn into STANDBY
mode and stop boiling. To resume boiling press "RE-BOIL" again.
Start Boiling Boiling Finished
Boiling indicator is ON Boiling indicator is OFF;
Temp indicator is ON
Idle for
10 seconds
UNLOCK indicator is ON UNLOCK indicator is OFF
PUSH
PUSH

www.NutrichefKitchen.com8
2. If Dispenser is in keep warm mode, press "RE-BOIL" button twice to set Hot Water
Dispenser into STANDBY mode. Resume boiling by pressing "RE-BOIL"again.
MAINTENANCE
BODY
Wipe the Hot Water Dispenser body with soft dry cloth.
• Wipe with dump cloth, if the stain is hard to remove. (never use soaked cloth!)
• Don't use thinner to clean, it might crack the plastic casing.
• Any cloth containing chemicals might cause color changing of body.
WARNING: This Hot Water Dispenser is not Dishwasher safe!
REMOVE SCALE DEPOSIT
If using tap water, the minerals in the water will deposit on the surface of stainless
steel lining over time. This deposit scale will shorten the life of this Hot Water
Dispenser. Please clean this Hot Water Dispenser with citric acid at least once a
month. Please follow the instruction on the citric acid's package to clean and
remove mineral deposits.
LINING
Wipe lining with dump sponge. Don't use detergent or any kind of abrasive brush.
REPLACE SILICON SEAL
The silicon seal may become damaged after a long period of use.
It should be replaced. Call our service line or order on our web store for replacement
silicon ring.
www.NutrichefKitchen.com 9
It is easy to replace silicon ring by removing four screws inside bottom of upper lid
and then removing the stainless steel plate. Remove the silicon ring and replace
with new ring. Put back Stainless Steel plate and tighten four stainless steel
screws.
STORAGE
1. Pull the plug out of outlet.
2. Pull the cord out of kettle.
3. Remove upper lid.
4. Pour all water out of kettle.
PUSH PUSH AGAIN
Push down the LID LOCK
then hold and pull the
LID LOCK up
Hold on the Hot Water
Dispenser body then
pull the lid out of the
Hinge.
Put the lid back to the
Hinge.

www.NutrichefKitchen.com10
TROUBLESHOOTING
www.NutrichefKitchen.com 11
OVERHEAT PROTECTION
Once the Hot Water Dispenser is empty of water, a overheat safety protection
sensor will automatically activate and quickly shut o the Hot Water Dispenser's
power to prevent overheating. At the same time, the temperature keep warm
lights blinking when overheat protection is activated.
This Hot Water Dispenser is equipped with overheat protection sensors, but it is
extremely dangerous without water in the Hot Water Dispenser with the power on.
This might cause a re and damage to your property.
Please always keep water above the REFILL line on the water gauge to avoid any
accident.
Note:
If you still can’t solve the problem after following the troubleshooting, contact our
service center or authorized repair center for repairing.
Do not try to disassembly this Hot Water Dispenser by yourself.
It will void manufactory warranty.
The following cases are exempted from free maintenance or warranty
1. The failure to present invoice, pre-pay postage or the failure to send in the
warranty registration form to our company.
2. Damage to the Hot Water Dispenser due to inappropriate use.
3. Use for commercial purposes.
4. Damage to Hot Water Dispenser resulting from unexpected accident after
purchase.
5. Damage to the Hot Water Dispenser due to self-modication or repair.
6. Damage to the Hot Water Dispenser resulting from natural and or man-made
disasters.
TROUBLES POSSIBLE CAUSE SOLUTION
White mineral or shiny
specks oating in the
water or deposited on
the surface of the inner
lining of the Hot water
Dispenser
Mineral Crystalized in water
Tap water contain too much
minerals causing deposits on
the surface of the inner lining
Clean with citric acid.
How to clean?
See REMOVE SCALE DEPOSIT
section in this menu or the
instruction on the package of
citric acid
Odors in the hot water
Chlorine in the tap water may
cause odor
Press “RE-BOILER” to
De-ChIorine
For the rst few uses, it may
have a plastic smell in the
water because of new plastic
components.
Boil a new pot of water for few
times before normal use
Water does not pump
out smoothly
Filter might be plugged Clean the lter with citric acid
Air might be trapped in the
water pump
Open the upper lid and closed
it few times, then try again.
Does not pump water
out at all
Check that the unlock
indicator is o
Press “UNLOCK” button once
then press “DISPENSE” to see
whether it works or not
Hot water leaking
out from the nozzle Too much water in the pot
Make sure the water is not
lled above the MAX water
level line.
No Power
Hot Water Dispenser
body case feels hot
Check the power cord
Attach power cord rmly to
both outlet and Hot Water
Dispenser
To keep water hot when at higher room temperature the
body case might reach 149°F

www.NutrichefKitchen.com12
HOT WATER DISPENSER FEATURES:
• 360° Rotating Base
• Instantly Heat & Dispense Hot Water!
• Simple Electric Plug-in Design
• Built-in LED Light Illuminates When Dispensing
• Adjustable Water Temperature & Dispensing Amounts
• Convenient Easy Access Rellable Water Tank
• Transparent Water Container with Clear Level Mark
• Safe for Placement on Any Table or Countertop
• Used for All Drinks Including Instant Coee, Tea & Soups!
• 2 Way Easy Dispensing Methods: Electric Auto Dispense & Cup Touching
• Automatically Keep Warm and Reboil
• Dry-boiled Protection and Safety Auto Shut-o
WHAT’S IN THE BOX:
• Heating Unit • Cable
NCHUB13
3L Digital Hot Water Dispenser
TECHNICAL SPECS:
• Heating Element: 750Watt
• Capacity: 3L
• Electric Auto Dispense Amounts: 10oz - 16oz per 10seconds
• Temp. Adjustment: 149 / 185 / 208° Fahrenheit
• Construction Material: 304 Stainless Steel Inner Pot
and #430 Stainless Steel Outer Housing
• Power Cord Length: 4.593' ft.
• Power Supply: 120V, 60Hz
• Product Dimensions (L x W H): 11.81’’ x 7.87’’ x 9.84’’ –inches
www.NutrichefKitchen.com 13
NCHUB24
4L Digital Hot Water Dispenser
TECHNICAL SPECS:
• Heating Element: 750Watt
• Capacity: 4L
• Electric Auto Dispense Amounts: 10oz - 16oz per 10seconds
• Temp. Adjustment: 149 / 185 / 208° Fahrenheit
• Construction Material: 304 Stainless Steel Inner Pot
and #430 Stainless Steel Outer Housing
• Power Cord Length: 4.593' ft.-
• Power Supply: 120V, 60Hz
• Product Dimensions (L x W H): 11.81’’ x 7.87’’ x 11.81’’ –inches
NCHUB35
5L Digital Hot Water Dispenser
TECHNICAL SPECS:
• Heating Element: 750Watt
• Capacity: 5L
• Electric Auto Dispense Amounts: 10oz - 16oz per 10seconds
• Temp. Adjustment: 149 / 185 / 208° Fahrenheit
• Construction Material: 304 Stainless Steel Inner Pot
and #430 Stainless Steel Outer Housing
• Power Cord Length: 4.593' ft.-
• Power Supply: 120V, 60Hz
• Product Dimensions (L x W H): 11.81’’ x 7.87’’ x 13.78’’ –inches