NutriChief PKFMR11BK User manual

STAINLESS STEEL
MILK FROTHER
Model: PKFMR11BK

WARNING! To reduce the risk of fire, electrical shock or injury to persons or property:
• Carefully read all instructions before operating your new product for the first time, and save for
future reference.
• Remove and safely discard any packaging material and promotional labels before using the
Milk Frother for the first time.
• To eliminate a choking hazard for young children, remove and safely discard the protective
cover fitted to the plug of this appliance.
• Ensure the Milk Frother is properly assembled before use. Follow the instructions provided in
this manual.
• Do not place the Milk Frother near the edge of a bench or table during operation. Ensure the
power cord does not hang over the edge of the bench or table, touch hot surfaces or become
knotted.
• Do not place the Milk Frother on or near a hot gas or electric burner, or where it could touch a
heated Oven.
• This Milk Frother is not intended to be operated by means of an external timer or separate
remote control system.
• Do not operate on a sink or drain board or polished wood surfaces.
• Ensure the appliance is operated on a clean, dry and level surface.
• This Milk Frother has been designed to heat and froth dairy milk and other milk alternatives. It
is not intended to thicken or heat other food substances like cream, custard, gravies, water etc.
• This appliance is not designed for commercial or industrial use.
• Use cautiously when pouring warmed milk from the Milk Frother as hot milk can scald.
• Do not operate the appliance without liquid. Always fill to at least the Min' mark and never fill
past the Max' mark.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction conceming use of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure they do not play with the appliance.
• This appliance is for household use only. Do not use this appliance for anything other than its
intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause
injury.
• The installation of a residual current device (safety switch) is recommended to provide
additional safety protection when using electrical appliances. It is advisable that a safety switch
with a rated residual operating current not exceeding 30mA be installed in the electrical circuit
supplying the appliance. See your electrician for professional advice.
• This appliance contains no user serviceable parts. Any maintenance other than cleaning should
be performed by a qualified person.
• Do not immerse unit, power plug or power cord in water, or any other liquid.
• Never operate any appliance with a damaged power cord or plug, should the appliance
malfunction, or if it has been damaged in any manner·
• Do not leave the appliance unattended whilst it is on.

FEATURES：
BEFORE FIRST USE
• Carefully remove your Milk Frother from the box and remove any packaging
materials.
• Clean the jug and accessories, as described in this manual, before first use.
• Fully unwind the power cord.
lNSTRUCTIONS:
1. Place the Milk Frother on a flat, level surface. Choose the appropriate whisk, and insert it
firmly onto the shaft at the base of the jug.
2. Pour the milk into the jug according to the max& min mark inside the jug. Max capacity chart is
below for your reference.
3. Place the lid firmly onto the jug. then press the button to tum on.

Whisk
Function
Max capacity
Time (approx.)
Frothing Cold Milk
115ml
100 seconds
Frothing & Heating
115ml
100 seconds
Heating (a small amount
of froth)
240ml
100 seconds
1. Frothing & Heating Milk/ Heating Milk: Press the 0n/0ff button to start .The blue and red
indicator lights will illuminate to show that the unit is in operation. The blue light will turn off
after the cycle has finished. The red light will start to flash for 30 seconds.
2.Frothing cold milk: Press and hold the 0n/0ff button for a further 1-2 seconds to switch cycles.
The blue light will illuminate and start to flash for 30 seconds after the cycle has finished.
HANDY HINTS:
• Always use the Milk Frother first to froth/heat your milk. While it is operating, prepare your
coffee or hot chocolate.
• Use whole milk with a fat content of over 3.0% for best results.
•Milk heats to approximately 149 degrees fahrenheit (+/-5 degrees) . This is the ideal temperature, as it ensures
the flavor of the coffee is not impaired, and it also means you do not have to wait as long to drink your coffee.
• Keep the whisks in a safe place, because they are small they can be easily misplaced.
• After each froth/heat wait 2 minutes to allow the thermostat to rest. After 2 minutes the Milk
Frother can be used again. To shorten this time, rinse with cold water and wipe dry after each
use.
• This Milk Frother is designed to heat plain milk only.

RECIPES
Frothed Milk Hot Milk
Cappuccino Cafe Latte
1/3 espresso 1/3 espresso shot
Add 2/3 frothed milk Add 2/3 heated milk and stir
Top with cocoa powder
Latte Macchiato Hot Chocolate
Pour frothed milk in a tall glass Pour heated milk into a large
Add espresso carefully mug Add chocolate powder
along the rim of the glass and stir to mix
Instant Frothy Coffee Instant Milky Coffee
Make an instant coffee Place instant coffee in a Cup/mug
Add frothed milk Add hot milk and stir to mix
CLEANING
1. Before commencing any cleaning, tum the power off at the outlet and remove the power plug.
2. Remove the jug from the power base.
3. Separate the lid and the silicon ring from the jug.
4. Flush and clean the jug with warm soapy water. This should be done immediately after each
use.
5. Rinse the lid and silicon ring in warm water, wash in soapy water if necessary.
6. Clean the jug body with a soft damp cloth. NEVER use harsh cleaning agents or abrasive
materials
7. Wash the whisks in warm soapy water and dry thoroughly. Store in a safe place.
NOTE: The Milk Frother or any of its accessories are NOT dishwasher safe.

TROUBLESHOOTING
Item
Issue
Reason
Solution
1
Indicator light doesn’t
work/jug doesn’t work
Plug is not inserted properly
Re-insert plug
Jug isn’t connected to power
base properly
Remove jug and replace
correctly
No power in the jack
Check the electric circuit
Problem with components
Repair or replace
2
Jug doesn’t work after
operation
Jug temperature is too high
Rinse cold water inside the jug
to reduce temperature
Jug is damaged with
immersion in water
Repair or replace
3
Motor doesn’t work
Jug is not being cleaned in
time after each use; dried
milk locks the mechanism.
Clean and move the shaft
sleeve of motor by hand to
loosen it.
Motor damaged
Repair or replace
4
No heating
Machine is damaged
Repair or replace
5
Charring
Dosage of milk either too
little or too much
Ensure the milk is over the min
mark, and not past max mark
Jug was reused without
cleaning/rinsing
Always clean after each use
Actual voltage is much lower
than specified voltage
Ensure you use the
appropriate voltage
DISPOSAL
Please dispose of the packaging according to your local waste regulations.
This product should never be disposed of in normal household waste at the end of its service life.
It must be delivered to a collection point for the recycling of electrical and electronic goods. This
is indicated by the symbol (dustbin with cross) on the product, in the instruction manual
or on the packaging. Ask your local disposal point about disposal. The materials are
reusable according to their labeling. In their reuse, material recycling or other forms of
using old appliances, you are making an important contribution in protecting our
environment. Please ask your local government for a suitable
disposal point (old appliance collection point of municipal disposal point). This way you are
disposing of your appliance ecologically.

TECHNICAL DATA
MILK FROTHER
120V~
60Hz
500W
READ AND SAVE THESE INSTRUCTIONS
Read and follow the instructions in this user manual even if you feel you are familiar with the
product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification
plate) and the date you received the product, together with your purchase receipt and attach to
the warranty and service information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on
specific loading tests. Normal use or the use of other recommended attachments may draw
significantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should
always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT