NUUO Titan NVR User manual

The Intelligent Surveillance Solution
Titan NVR
NuClient User Manual
Ver. 1.0.0.110919.00

Table of Contents
1Installation / Uninstallation ..................................................... 1
2The Master-Slave Architecture ................................................. 7
3Log in................................................................................... 8
4Log out and Exiting ................................................................ 9
5Display version information ....................................................11
6Interface Overview................................................................13
6.1 Menu ..............................................................................13
6.2 Live View ........................................................................14
6.2.1 View List..................................................................15
6.2.2 Content List .............................................................15
6.2.3 PTZ Control Panel .....................................................16
6.2.4 I/O Control Panel......................................................16
6.2.5 Content Properties Panel ...........................................16
6.2.6 Event Panel..............................................................17
6.2.7 View Panel...............................................................17
6.2.8 Status Bar ...............................................................18
6.2.9 Toolbar ...................................................................18
6.3 Playback .........................................................................19
6.3.1 Search Panel............................................................19
6.3.2 Timeline ..................................................................19
6.3.3 Time Navigation / View Toolbar ..................................19
7Configure.............................................................................21
7.1 Configure Views ...............................................................21
7.1.1 Add A View ..............................................................22
7.1.2 Add cameras to View ................................................25
7.1.3 Add A View Tour.......................................................26
7.1.4 Search A View..........................................................28

7.1.5 Delete A View...........................................................29
7.1.6 Duplicate a view or a view tour ..................................30
7.2 Configure Content ............................................................31
7.2.1 Add image fusion......................................................31
7.2.2 Example of image fusion............................................36
7.3 E-Map.............................................................................41
7.4 Application configurations..................................................47
7.4.1 General ...................................................................48
7.4.2 User Interface ..........................................................50
7.4.3 Function ..................................................................53
7.5 Export/Import Configurations.............................................55
8Watch Live Video ..................................................................57
8.1 PTZ ................................................................................57
8.1.1 Optical PTZ ..............................................................57
8.1.2 Digital PTZ...............................................................58
8.1.3 ImmerVision PTZ ......................................................62
8.1.4 The Modes of ImmerVision PTZ ..................................64
8.2 Toolbar Content ...............................................................68
8.2.1 Instant Playback.......................................................68
8.2.2 Snapshot .................................................................68
8.2.3 PTZ.........................................................................71
8.2.4 Manually Record Video ..............................................71
8.2.5 Audio ......................................................................71
8.2.6 Connection ..............................................................72
8.2.7 Connection Settings ..................................................72
8.3 Property Window..............................................................73
8.4 Event List........................................................................73
8.5 Joystick settings...............................................................75

9Watch Recorded Video ...........................................................77
9.1 Search in Timeline............................................................77
9.2 Toolbar Content ...............................................................82
9.3 The Playback Control Panel................................................82
9.3.1 The Playback Control ................................................82
9.3.2 The Date / Time Display ............................................83
Event browsing control......................................................84
9.3.3 ...................................................................................84
9.4 Export Video....................................................................85
9.5 Snapshot / Print...............................................................87
9.6 Motion Search..................................................................87
10 Backup ................................................................................94

1
1Installation / Uninstallation
1.Insert the CD into your CD-ROM drive and double-click Setup.exe to begin
installation.
2. Click the Next button.
3. Accept the License Agreement and click the Next button.

2
4. Enter your name and the name of your company, and click the Next
button.
5. There are two types of installation, Complete and Custom.
Complete: Install everything in this package.

3
Custom: Install a custom selection of applications and configure the
installation directory.

4
Select the installation folder
Select the applications you want to install
6. Click on the Install button to start the installation.

5
7. The system is being installed.
8. After all the files are installed, the installer will disable UAC on your
Windows, if UAC is not disabled. That will require a restart.
9. Choose Yes to restart immediately or No to restart later, and click on
Finish.

6
10. After Windows is restarted, the installation is completed. After the
system is successfully installed, you should find it in your Start Menu,
and you may start using the application.
Client PC Minimum Requirements
CPU
Intel Core 2 Duo, 2.6GHz
Display
Card
OpenGL 2.0 and later
OS
Supported
Windows XP 32 bit
Windows 7 32/64 bit
RAM
1GB
2GB
User
Interface
1. HTTP Web browser - Internet Explorer 8 and
later
2. NUUO client application program
We suggest that you avoid using on-board graphics card which will give you a poor
performance. NuClient may pop up an error dialog saying “Videos cannot be
displayed on the Client PC with on-board graphic card” for using an on-board
graphics card.
We also recommend that the drivers of graphics cards be upgraded to the latest
versions.
The system requires OpenGL 2.0 or higher versions to be installed. An error
message will pop up if OpenGL 2.0 or higher versions are not found.
The minimum supported screen resolution 1024x768. NuClient will not run under
the minimum resolution.

7
2The Master-Slave Architecture
One of the most advanced architecture design in NVRTitan is the master-slave
architecture. In the architecture, NVRTitan is not merely a single recording
machine, but also a bridge linking with multiple NVRTitan boxes.
From the perspective of users, they do not need to connect to different
NVRTitan boxes one at a time anymore. With NVRTitan, users can connect to
just one NVRTitan to monitor the NVRTitan installed in multiple places. Refer
to NVRTitan Server User Manual for details.

8
3Log in
When the application is opened, you will see a log-in window. Please enter the
server address you are going to connect to, the user name, and the password.
After entering the correct user and server information, you will see the main
interface of the system.

9
4Log out and Exiting
1. To log out yourself from the system, please go to Menu / Log out.
2. If you make any change in the configurations, you may a dialogs
confirming if you want to update the modification when you log out. To
update changes to server, please click the Yes button in the dialog.
3. A progress bar will appear to show the update status.
4. The login window will appear after the update is completed, and you are
logged out from the system when you see this dialog.

10
Both your primary monitor and secondary monitors will be closed when you log out.
5. After logging out, the system will still be running and stay in main memory.
To exit the system, please choose Exit.

11
5Display version information
1. To show the version of NuClient, please click on About.
2. The dialog shows the version, the copyright information, and also the links
to NUUO’s homepage and its technical support site.
http://support.nuuo.com is NUUO’s technical support site. You may find all sorts
of technical information including FAQs, product specifications, and technical contact
information.
Preview:

12

13
6Interface Overview
This chapter briefly describes the components in the interface and also their
functions.
6.1 Menu
Clicking on menu, you will see extended functions:
Update View List to server: Submit the changes you make during
your session. If you don’t have the privilege to modify a View List, an
error message will pop up when you try to update modifications. User
privilege can be configured on server.
Backup tool: Save videos as is in local folders.
E-map editor: Open the map editor with which you may insert multiple
maps to add markers to specify the locations of cameras and I/O.
Image Fusion editor: Open up the image fusion editor which allows
you to create a panoramic view from multiple cameras.
Client configuration: Show all configurable parameters of NuClient.
Export Client Config: Save NuClient configurations to disk.
Import Client Config: Load NuClient configurations from disk.
About: Show software information.
Logout: Log out the current user. (NuClient will still be running.)
Exit: Log out the current user and exit NuClient.
When you exit NuClient, the display settings (the number of monitors
and the view list) will be saved. Next time you open NuClient, it will
try to restore the previous display settings.

14
6.2 Live View
Live view page displays video streams in a grid. Grid types can be configured
using the toolbar below the live view area.
If you have multiple monitors, the Live View interface on secondary monitors is
very similar. The main difference is in the toolbar.

15
The interface of Live View on a secondary monitor
Icon
Definition
Switch between views
Close Live View on a secondary
monitor
6.2.1 View List
A view is a collection of configurations including those of grid layouts, camera
settings, aspect ratios, stream profiles, etc.
6.2.2 Content List
Content List shows all the devices a user have permission to access. A device
can be a camera, an I/O device, an image fusion, or an E-map.
Each device node as shown in the screenshot below can be expanded to see
the details of each device. Expanding each device will show subordinate items,

16
such as sensors on cameras.
6.2.3 PTZ Control Panel
In the panel, you may control both optical and digital pan/tilt/zoom of your
cameras. Optical PTZ is enabled only when a camera has PTZ capability.
Digital PTZ is achieved purely by digital image processing, and it is enabled
for all cameras.
6.2.4 I/O Control Panel
The status of I/O devices is displayed in panel. You can enable trigger outputs
using this panel.
If the current content is an image fusion, in this panel, all of the I/O devices will be
displayed in one list. You may name the I/O devices on Titan server.
6.2.5 Content Properties Panel
Properties panel shows the information of the current content in focus. The
display information varies according to the type of content in a grid cell and
according to the type of the current tab.