Panasonic Zener Diodes MAZSxxxG Series User manual

Zener Diodes
1
Publication date: October 2007 SKE00034BED
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZSxxxG Series
Silicon planar type
For constant voltage, constant current, waveform clip-
per and surge absorption circuit
■Features
•Low noise type
•VZrank classified(VZ=2.4 V to 39 V)
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Repetitive peak forward current IFRM 200 mA
Total power dissipation *Ptot 150 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Note) *: With a printed circuit board
Parameter Symbol Conditions Min Typ Max Unit
Forward voltage VFIF=10 mA 0.9 1.0 V
Zener voltage *2VZIZSpecified value V
Reverse current IRVRSpecified value µA
Zener rise operating resistance RZK IZSpecified value Ω
Zener operating resistance RZIZSpecified value Ω
Temperature coefficient of zener voltage *3SZIZSpecified value mV/°C
■Common Electrical Characteristics Ta=25°C±3°C *1
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Rated input/output frequency: 5 MHz
3. *1: The VZvalue is for the temperature of 25°C. In other cases, carry out the temperature compensation.
*2: Guaranteed at 20 ms after power application.
*3: Tj=25°C to 150°C
1
2
Refer to the list of the
electrical characteristics
within part numbers
■Package
•Code
SSMini2-F4
•Pin Name
1: Anode
2: Cathode
■Marking Symbol
Refer to the list of the electrical
characteristics within part numbers
■Internal Connection

MAZSxxxG Series
SKE00034BED
2
This product complies with the RoHS Directive (EU 2002/95/EC).
Zener voltage Reverse Zener operating
current resistance
Part Number VZ(V) IR (µA) RZ (Ω)R
ZK (Ω)S Z (mV/°C) Marking symbol
Min Nom Max IZMax VRMax IZMax IZTyp IZ
(mA) (V) (mA) (mA) (mA)
MAZS024G0L 2.28 2.40 2.60 5 120 1.0 100 5 −1.6 5 T
MAZS027G0L 2.50 2.70 2.90 2 or 2_ or 2^
MAZS027GLL 2.50 2.60 2.75 5 120 1.0 110 5 −2.0 5 2_
MAZS027GHL 2.65 2.80 2.90 2^
MAZS030G0L 2.80 3.00 3.20 3 or 3_ or 3^
MAZS030GLL 2.80 2.90 3.05 5 50 1.0 120 5 −2.1 5 3_
MAZS030GHL 2.95 3.10 3.20 3^
MAZS033G0L 3.10 3.30 3.50 F or F_ or F^
MAZS033GLL 3.10 3.20 3.35 5 20 1.0 130 5 −2.4 5 F_
MAZS033GHL 3.25 3.40 3.50 F^
MAZS036G0L 3.40 3.60 3.80 H or H_ or H^
MAZS036GLL 3.40 3.50 3.65 5 10 1.0 130 5 −2.4 5 H_
MAZS036GHL 3.55 3.70 3.80 H^
MAZS039G0L 3.70 3.90 4.10 K or K_ or K^
MAZS039GLL 3.70 3.80 3.97 5 10 1.0 130 5 −2.5 5 K_
MAZS039GHL 3.87 4.00 4.10 K^
MAZS043G0L 4.00 4.30 4.60 L or L_ or L−or L^
MAZS043GLL 4.03 4.10 4.26 5 10 1.0 130 5 −2.5 5 L_
MAZS043GML 4.17 4.30 4.40 L−
MAZS043GHL 4.31 4.40 4.54 L^
MAZS047G0L 4.40 4.70 5.00 N or N_ or N−or N^
MAZS047GLL 4.45 4.60 4.69 5 2.0 1.0 80 5 800 1.0 −1.4 5 N_
MAZS047GML 4.59 4.70 4.83 N−
MAZS047GHL 4.74 4.90 4.99 N^
MAZS051G0L 4.80 5.10 5.40 5 or 5_ or 5−or 5^
MAZS051GLL 4.87 5.00 5.12 5 1.0 2.0 60 5 500 1.0 −0.8 5 5_
MAZS051GML 5.00 5.10 5.26 5−
MAZS051GHL 5.14 5.30 5.40 5^
MAZS056G0L 5.30 5.60 6.00 P or P_ or P−or P^
MAZS056GLL 5.30 5.40 5.58 5 0.5 2.5 40 5 200 0.5 1.2 5 P_
MAZS056GML 5.48 5.60 5.76 P−
MAZS056GHL 5.66 5.80 5.95 P^
MAZS062G0L 5.80 6.20 6.60 6 or 6_ or 6−or 6^
MAZS062GLL 5.85 6.00 6.15 5 0.2 4.0 30 5 100 0.5 2.3 5 6_
MAZS062GML 6.05 6.20 6.36 6−
MAZS062GHL 6.24 6.40 6.56 6^
MAZS068G0L 6.40 6.80 7.20 R or R_ or R−or R^
MAZS068GLL 6.44 6.60 6.77 5 0.1 4.0 20 5 60 0.5 3.0 5 R_
MAZS068GML 6.64 6.80 6.98 R−
MAZS068GHL 6.85 7.00 7.20 R^
MAZS075G0L 7.00 7.50 7.90 7 or 7_ or 7−or 7^
MAZS075GLL 7.07 7.30 7.43 5 0.1 5.0 20 5 60 0.5 4.0 5 7_
MAZS075GML 7.29 7.50 7.67 7−
MAZS075GHL 7.51 7.70 7.89 7^
MAZS082G0L 7.70 8.20 8.70 8 or 8_ or 8−or 8^
MAZS082GLL 7.77 7.90 8.17 5 0.1 5.0 20 5 60 0.5 4.6 5 8_
MAZS082GML 8.03 8.20 8.43 8−
MAZS082GHL 8.29 8.50 8.70 8^
MAZS091G0L 8.50 9.10 9.60 9 or 9_ or 9- or 9^
MAZS091GLL 8.58 8.80 9.02 5 0.1 6.0 20 5 60 0.5 5.5 5 9_
MAZS091GML 8.87 9.10 9.33 9−
MAZS091GHL 9.14 9.40 9.60 9^
■Electrical characteristics within part numbers Ta=25°C±3°C
Temperature
coefficient of
zener voltage

MAZSxxxG Series
SKE00034BED 3
This product complies with the RoHS Directive (EU 2002/95/EC).
Zener voltage Reverse Zener operating
current resistance
Part Number VZ(V) IR (µA) RZ (Ω)R
ZK (Ω)S Z (mV/°C) Marking symbol
Min Nom Max IZMax VRMax IZMax IZTyp IZ
(mA) (V) (mA) (mA) (mA)
MAZS100G0L 9.40 10.00 10.60 10 or 10_ or 10−or 10^
MAZS100GLL 9.44 9.70 9.92 5 0.05 7.0 30 5 60 0.5 6.4 5 10_
MAZS100GML 9.75 10.00 10.25 10−
MAZS100GHL 10.07 10.30 10.59 10^
MAZS110G0L 10.40 11.00 11.60 11 or 11_ or 11−or 11^
MAZS110GLL 10.40 10.70 10.94 5 0.05 8.0 30 5 60 0.5 7.4 5 11_
MAZS110GML 10.73 11.00 11.28 11−
MAZS110GHL 11.05 11.30 11.60 11^
MAZS120G0L 11.40 12.00 12.70 12 or 12_ or 12−or 12^
MAZS120GLL 11.40 11.70 11.96 5 0.05 9.0 30 5 80 0.5 8.4 5 12_
MAZS120GML 11.73 12.00 12.33 12−
MAZS120GHL 12.06 12.30 12.68 12^
MAZS130G0L 12.40 13.00 14.10 13 or 13_ or 13−or 13^
MAZS130GLL 12.40 12.70 12.99 5 0.05 10.0 35 5 80 0.5 9.4 5 13_
MAZS130GML 12.73 13.00 13.40 13−
MAZS130GHL 13.25 13.70 14.08 13^
MAZS150G0L 13.90 15.00 15.60 15 or 15_ or 15−or 15^
MAZS150GLL 13.90 14.30 14.76 5 0.05 11.0 40 5 80 0.5 11.4 5 15_
MAZS150GML 14.60 15.00 15.35 15−
MAZS150GHL 14.95 15.30 15.60 15^
MAZS160G0L 15.30 16.00 17.10 16 or 16_ or 16−or 16^
MAZS160GLL 15.30 15.70 16.09 5 0.05 12.0 50 5 80 0.5 12.4 5 16_
MAZS160GML 15.70 16.00 16.50 16−
MAZS160GHL 16.26 16.70 17.10 16^
MAZS180G0L 16.90 18.00 19.10 18 or 18_ or 18−or 18^
MAZS180GLL 16.90 17.30 17.76 5 0.05 13.0 60 5 80 0.5 14.4 5 18_
MAZS180GML 17.55 18.00 18.45 18−
MAZS180GHL 18.20 18.70 19.10 18^
MAZS200G0L 18.80 20.00 21.20 20 or 20_ or 20−- or 20^
MAZS200GLL 18.85 19.30 19.81 5 0.05 15.0 80 5 100 0.5 16.4 5 20_
MAZS200GML 19.50 20.00 20.50 20−
MAZS200GHL 20.15 20.70 21.19 20^
MAZS220G0L 20.80 22.00 23.30 22 or 22_ or 22−or 22^
MAZS220GLL 20.80 21.30 21.86 5 0.05 17.0 80 5 100 0.5 18.4 5 22_
MAZS220GML 21.45 22.00 22.55 22−
MAZS220GHL 22.10 22.70 23.24 22^
MAZS240G0L 22.80 24.00 25.60 24 or 24_ or 24−or 24^
MAZS240GLL 22.80 23.30 23.97 5 0.05 19.0 100 5 120 0.5 20.4 5 24_
MAZS240GML 23.50 24.00 24.70 24−
MAZS240GHL 24.35 25.00 25.60 24^
MAZS270G0L 25.10 27.00 28.90 27 or 27_ or 27−or 27^
MAZS270GLL 25.30 26.00 26.70 2 0.05 21.0 120 2 120 0.5 23.4 2 27_
MAZS270GML 26.30 27.00 27.70 27−
MAZS270GHL 27.30 28.00 28.70 27^
MAZS300G0L 28.00 30.00 32.00 30 or 30_ or 30−or 30^
MAZS300GLL 28.30 29.00 29.70 2 0.05 23.0 160 2 160 0.5 26.6 2 30_
MAZS300GML 29.30 30.00 30.80 30−
MAZS300GHL 30.20 31.00 31.80 30^
MAZS330G0L 31.00 33.00 35.00 33 or 33_ or 33−or 33^
MAZS330GLL 31.20 32.00 32.80 2 0.05 25.0 200 2 200 0.5 29.7 2 33_
MAZS330GML 32.20 33.00 33.80 33−
MAZS330GHL 33.20 34.00 34.90 33^
■Electrical characteristics within part numbers (continued) Ta=25°C±3°C
Temperature
coefficient of
zener voltage

MAZSxxxG Series
SKE00034BED
4
This product complies with the RoHS Directive (EU 2002/95/EC).
Zener voltage Reverse Zener operating
current resistance
Part Number VZ(V) IR (µA) RZ (Ω)R
ZK (Ω)S Z (mV/°C) Marking symbol
Min Nom Max IZMax VRMax IZMax IZTyp IZ
(mA) (V) (mA) (mA) (mA)
MAZS360G0L 34.00 36.00 38.00 36 or 36_ or 36−or 36^
MAZS360GLL 34.10 35.00 35.90 2 0.05 27.0 250 2 250 0.5 33.0 2 36_
MAZS360GML 35.10 36.00 36.90 36−
MAZS360GHL 36.10 37.00 37.90 36^
MAZS390G0L 37.00 39.00 41.00 39 or 39_ or 39−or 39^
MAZS390GLL 37.10 38.00 39.00 2 0.05 30.0 300 2 300 0.5 35.6 2 39_
MAZS390GML 38.00 39.00 40.00 39−
MAZS390GHL 39.00 40.00 41.00 39^
■Electrical characteristics within part numbers (continued) Ta=25°C±3°C
Temperature
coefficient of
zener voltage

MAZSxxxG Series
SKE00034BED 5
This product complies with the RoHS Directive (EU 2002/95/EC).
0
0 2001601208040
50
100
150
200
250
Ambient temperature Ta(°C)
Total power dissipation P
tot
(mW)
Heat sink
Copper foil
0.8 mm × 0.8 mm
0.001
024681012
0.01
0.1
1
10
100
Zener voltage V
Z
(V)
Zener current I
Z
(mA)
T
a = 25°C
Static
charac-
teristics
MAZS062
MAZS068
MAZS075
MAZS082
MAZS091
MAZS100
MAZS024
MAZS039
MAZS047
MAZS051
MAZS043
MAZS056
0.001
0 102030405060
0.01
0.1
1
10
100
Zener voltage VZ(V)
Zener current IZ(mA)
T
a = 25°C
Static
charac-
teristics
MAZS160
MAZS200
MAZS240
MAZS360
MAZS390
MAZS110
MAZS130
Ptot TaIZVZIZVZ
0.001
024681012
0.01
0.1
1
10
100
Tj=25°C
Dynamic
charac-
teristics
MAZS100
MAZS091
MAZS082 MAZS075 MAZS068 MAZS062 MAZS056 MAZS051 MAZS047 MAZS043 MAZS039 MAZS033 MAZS027 MAZS024
Zener voltage V
Z
(V)
Zener current I
Z
(mA)
0.001
0 102030405060
0.01
0.1
1
10
100
T
j = 25°C
Dynamic
charac-
teristics
MAZS110 MAZS130 MAZS160 MAZS200 MAZS240 MAZS360 MAZS390
Zener voltage V
Z
(V)
Zener current I
Z
(mA)
1
10
100
1
000
0.1 1 10010 1
000
Zener operating resistance R
Z
(Ω)
Zener current I
Z
(mA)
T
a = 25°C
MAZS047
MAZS039
MAZS051
MAZS056
MAZS062
MAZS068
MAZS160
MAZS390
MAZS024
MAZS100
MAZS082
MAZS043
0.01
0 0.2 0.4 0.6 1.00.8 1.2
0.1
1
10
100
Forward voltage V
F
(V)
Forward current I
F
(mA)
T
a = 25°C
15
5
−5
20
25
0
10
01020 405030
Zener current IZ(mA)
Temperature coefficient of zener voltage SZ(mV/°C)
MAZS240
MAZS160
MAZS100
MAZS068
MAZS039
MAZS024
IZVZIZVZRZIZ
IFVFSZIZ

MAZSxxxG Series
SKE00034BED
6
This product complies with the RoHS Directive (EU 2002/95/EC).
1
10
100
0.1
1001010.10.01
Pulse width tW(ms)
Non-repetitive reverse P
ZSM
(W)
surge power dissipation
MAZS039
MAZS075
T
a = 25°C
t
W
Non repetitive
P
ZSM
0.1
1
10
0.01
1001010.10.01
Pulse width tW(s)
Thermal impedance Zth (°C/mW)
With heat sink (Typ. value)
Without heat sink (Typ. value)
Heat sink
Copper foil 0.8 mm × 0.8 mm
PZSM tWZth tW

MAZSxxxG Series
SKE00034BED 7
This product complies with the RoHS Directive (EU 2002/95/EC).
SSMini2-F4 Unit: mm
0.30 ±0.05
0.80
+0.05
−0.03
2
1
0.60
+0.05
−0.03
5°
(0.15)
0.13
+0.05
−0.02
1.60
±0.05
1.20
+0.05
−0.03
0 to 0.05
0.20
±0.05
5°

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.