NVX BE-JP-WULTD-VSW104v2 Series User manual

INSTALLATION GUIDE
NVX BE-JP-WULTD-VSW104v2
Series Bass Enclosure for 2011-up Jeep Wrangler

Step 1
Clear Cargo compartment and locate speaker
wire.
Step 2
Connect speaker wire to the enclosure + to +
and - to -.
Step 3
A) Withe the rear set leaning forward, align
the enclosure hooks to loops in rear seat
hinge.
B) Pull the seat back and lock the enclosure
in place.
Congratulations
on the newly found bass using the NVX B.O.O.S.T enclosure
DIFFICULTY LEVEL: 1out of 10 being the most difcult.
We recommend the installation of the NVX BE-JP-WULTD-WSW104v2 to be performed by a professional that
will have the skills and tools to ensure the job is done correctly. Please follow the steps above to get the best
performance out of the NVX BE-JP-WULTD-WSW104v2. Installing and mounting NVX BE-JP-WULTD-WSW104v2
improperly can present a serious safety hazard in the event of a collision. If you have any questions regarding
installation of this product please feel free to contact NVX directly for further guidance and installation techniques.