NXP Semiconductors FRDM-K64F-AGM04 User manual

Quick Reference
FRDM-K64F-AGM04
Sensor Toolbox Development Platform for
MMA8652FC 3-axis digital accelerometer,
FXAS21002C 3-axis digital angular rate gyroscope,
MAG3110 3-axis digital magnetometer, and
NXP FRDM-K64F development board
SENSOR TOOLBOX DEMONSTRATION KIT

Quick Reference
Figure 1: FRDM-K64F-AGM04
GET TO KNOW THE FRDM-K64F-AGM04
6 – I2C_SCL1
5 – I2C_SDA1
7 – GND
IN1_8652 – 3
IN1_21002 – 5
IN1_3110 – 6
IN2_8652 – 1
IN2_21002 – 3
I2C_SCL0 – 10
I2C_SDA0 – 9
6 – GND
4 – VDD
2 – VDD
Test points (14 places)
Through hole pins (14 places)
MAG3110 3-axis, digital magnetometer
10 DFN (2 mm x 2 mm x 0.85 mm)
FXAS21002C 3-axis digital
angular rate gyroscope
24 QFN (4 mm x 4 mm x 1 mm)
MMA8652FC 3-axis,
12-bit, digital accelerometer
10 DFN (2 mm x 2 mm x 1 mm)

www.nxp.com
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. © 2016 NXP B.V.
Document Number: FRDM-K64F-AGM04_QRC REV 0
Agile Number: 920-29416 REV A
www.nxp.com
HOW TO GET STARTED
1. Verify package contents:
• FRDM-K64F
• FRDM-STBC-AGM04
• USB cable
2. Download the mbed Windows serial
port driver:
development.mbed.org/handbook/
Windows-serial-configuration
For the latest FRDM-K64F drivers,
please visit nxp.com/openSDA
3. Plug one end of a USB cable into the
SDA port on the assembly. Plug the
other end of the cable into the USB
port on the computer, Figure 2.
4. Download and install the latest
Sensor Toolbox software at:
www.nxp.com/sensortoolbox Figure 2: Connect kit to computer