NXP Semiconductors FRDM-KL25Z User manual

Copyright © 2015 ARM Ltd. All rights reserved.
Quick Start Guide
NXP FRDM-KL25Z
Install Keil MDK Version 5
Download and install the MDK Core from www.keil.com/mdk5/install
Add Software Pack using the Pack Installer
Keil::Kinetis_Kxx_DFP –Freescale Kinetis KLxx Series Device Support
Power up the board
Connect a USB power supply to the Power / OpenSDA Mini-USB receptacle
Verify Installation
Copy an example using the Pack Installer. Compile, download to Flash, and debug the application. The
provided examples are ready to run.
Or download examples that apply to this board www.keil.com/dd2/freescale/mkl25z128xxx4
More Information
Board Information www.keil.com/boards2/freescale/frdm_kl25z
Related Products
MDK Version 5 www.keil.com/mdk5
Getting Started User’s Guide www.keil.com/gsg
MDK-Professional Middleware www.keil.com/middleware
Learning Platform www.keil.com/learn

Copyright © 2015 ARM Ltd. All rights reserved.
Debug Configuration
NXP FRDM-KL25Z
Debug with CMSIS-DAP
Open the dialog Options for Target –Debug.Enable Use and select CMSIS-DAP Debugger.
Click Settings.
In the Debug tab, ensure to have
Port set to SW, and SWJ enabled.