NXP Semiconductors MIMXRT1060-EVKB User manual

QUICK START GUIDE
MIMXRT1060-EVKB
Evaluation kit for the i.MX RT1060 MCU
600 MHz Arm
®
Cortex
®
-M7
MIMXRT1060-EVKB QSG

2
GET TO KNOW THE MIMXRT1060-EVKB
Figure 1: MIMXRT1060-EVKB
Front View
Figure 2: MIMXRT1060-EVKB
Back View
M.2 InterfaceM.2 Interface Debug USBDebug USB
Power ResetPower ResetJTAGJTAG
Boot Mode SelectBoot Mode Select
SwitchSwitch
Audio Main ConnectionAudio Main Connection
i.MX RT1060 MCUi.MX RT1060 MCU
QSPI FlashQSPI Flash
Audio JackAudio Jack
EthernetEthernet
Camera InterfaceCamera Interface
Arduino InterfaceArduino Interface
SDRAMSDRAM
TFTF
Hyper FlashHyper Flash
User ButtonUser Button
DC IN: 5VDC IN: 5V
Power
Switch
POR
Reset
Arduino Interface
USB
HOST
ON/
OFF
USB
OTG
Touch
Interface
LCD
Interface

3
QUICK START GUIDE MIMXRT1060-EVKB
The evaluation kit is shipped with
an MIMXRT1060-EVKB board and a
USB cable .
1. Connect the MIMXRT1060-EVKB board
to a PC using the included micro-USB
cable to USB connector (J1).
The MIMXRT1060-EVKB comes
preprogrammed with a demo that will
initiate the LED on the board to flash
periodically when plugged in.
2. Explore more out-of-box demos and
download software and tools on www.
nxp.com/MIMXRT1060-EVK/StartNow.
HOW TO GET STARTED

SUPPORT
Visit www.nxp.com/support for a list of phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete warranty information.
GET STARTED
Download installation software
and documentation under
“Jump Start Your Design” at
www.nxp.com/MIMXRT1060-EVK/
startnow.
www.nxp.com/MIMXRT1060-EVK/startnow
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. Arm and Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries)
in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights,
designs and trade secrets. All rights reserved. © 2021 NXP B.V.
Document Number: MIMXRT1060EVKBQSG REV 1
Agile Number: 926-79035 Rev B