NXP Semiconductors MPC5668 EVB User manual

Quick Start Guide for MPC5668 EVB
MPC5668 EVB
Dual-core MCUs supporting
multiple communication protocols

Get to know the MPC5668 EVB
MLB
JTAG
Nexus
Reset
Power
Ethernet
SW4
SW3
SW2
SW1
LIN FlexRay CAN
SCI
Potentiometer
CLK 2
CLK 1MPC5668G/E

Install software
and hardware
1. Insert the CodeWarrior Development Studio
installation CD in to your computer and
follow the instructions in the Quick Start
guide provided with this CD.
2. Fit P&E Multilink to MPC5668 EVB to P18
and connect this to your computer via the
supplied USB cable.
3. Connect the power supply to the EVB.
A selection of international adapters is
provided with the power supply.
4. Power up EVB moving SW6 to the ON
position.
5. When prompted install Multilink USB 2.0
driver from CodeWarrior Development
Studio CD using the Windows New
Hardware Wizard.
Begin debug
1. With the EVB powered and P&E
Multilink in place:
a. Click the Debug symbol in
CodeWarrior IDE, or
b. From Menu bar, select Project
Debug, or
c. Press F5 key. This will launch
ICDPPCNEXUS Debugger
for CodeWarrior
2. PEMICRO Connect Manager GUI will open
on screen. Settings should be: Interface:
USB PowerPC Nexus Multilink (USB-
ML-PPCNEXUS) Port: USB1: USB-ML-
PPCNEXUS Rev A (PE8012697).
3. Click “Connect (Reset)” to initialize the
MPC5668 device and load the “Hello
World” code created in CodeWarrior. If
code is not loaded automatically, it can be
done manually from the Menu bar, File ->
Load Object/Debug File and navigate to the
ram.elf file you created in Code Warrior.
4. To run code, from Menu bar, select
ExecuteGo or ExecuteStep/Multiple Step.
STEP
1
STEP
2
Quick Start Guide for MPC5668 EVB

Freescale, the Freescale logo and CodeWarrior are trademarks or
registered trademarks of Freescale Semiconductor, Inc. in the U.S. and
other countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2010.
Doc Number: MPC5668QSG / REV 0
Agile Number: 926-25193 / REV B
To learn more about the Wi-Fi module and MQX software,
read the release notes and lab tutorial at
www.freescale.com/bodyelectronics.