NXP Semiconductors MSC8156ADS User manual

Verify Kit Contents
Verify that all kit contents are included.
a.) MSC8156ADS with attached plastic spacers
and screws
b.) CodeWarrior Development Suite with license, Suite
Quick Start and memory stick with software
c.) Documentation CD for MSC8156ADS
d.) AC/DC 12V/5.5A universal power supply kit (1)
e.) RS-232 standard serial cable with two
9-pin connectors (1)
f.) Ethernet cables (2)
g.) USB cable Type A to Type B (1)
h.) Allen key (1)
Note: A UTAP connector, used for system debugging,
is not supplied in the kit; it can be ordered separately.
Default Settings
The board is shipped with default settings.
For detailed settings information, access the Hardware
Getting Started Guide on the documentation CD. Use this
guide to verify switch (Section 5) and jumper (Section 6)
default settings.
Assemble the Power Supply
For standalone mode, assemble and connect
the 12V power supply by following these steps:
a.) Ensure that all power is turned off.
b.) Assemble the AC/DC power supply kit as follows:
Connect the power cable to the suitable country-•
specific wall plug option.
Connect the assembled power cable to the•
power supply.
c.) Connect the AC/DC power supply cable to the 12V
(P5) board jack.
d.) Plug the power cable into the wall outlet.
e.) Insert one end of the USB cable into the board USB
socket (J13).
Note: In AMC mode, power comes from a connecting board
(not shown in photo).
Power Up and Power Off
Perform the initial power up and system check:
Move the power switch (S1) to the ON position. After•
completion of the PRESET sequence, LDs 13 and 14
display a constant green light.
Move the power switch (S1) to the OFF position to power•
off the system.
Note: Steps 1 to 4 describe the mechanical setup and
basic ADS contents for a standalone system. Refer to
the Hardware Getting Started Guide and MSC8156ADS
Reference Manual for other configuration details.
STEP
1
STEP
2
STEP
3
STEP
4
Quick Start Guide for MSC8156ADS
ab
c
e f g
d
LD 13
LD 14
S1
h
J13
P5

Load the Software
Load the software after confirming board
connections and operation.
Remove the memory stick from the CodeWarrior•
Development Suite package.
Insert the memory stick into the USB port connection•
of the designated PC.
Follow the displayed instructions.•
Memory Stick
The memory stick included in the CodeWarrior
Development Suite package holds the software.
The CodeWarrior Development Suite Quick Start included
with the software package explains how to register and
activate the software, repair existing software and purchase
additional products.
Documentation CD
The documentation CD includes the Hardware
Getting Started Guide, the MSC8156 Application
Development System (MSC8156ADS) Reference Manual
and other product documentation.
Refer to www.freescale.com/dsp for current documentation
relating to MSC8156 and MSC8256 DSP family products
supported by this board.
Supported products include the following devices:
•MSC8154
•MSC8156
•MSC8251
•MSC8252
•MSC8254
•MSC8256
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
[phone] or
[phone]
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
[phone] (English)
[phone] (English)
[phone] (German)
[phone] (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
[phone]
[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
[phone]
[email protected]
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
[phone] or
[phone]
Fax: [phone]
[email protected]
Quick Start Guide for MSC8156ADS
STEP
5
Freescale, the Freescale logo, CodeWarrior, ColdFire and Processor Expert are trademarks or registered trademarks of Freescale Semiconductor,
Inc. Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2010 Freescale Semiconductor, Inc.
Doc Number: MSC8156ADSQSG / REV 0
Agile Number: 926-78471 / REV A
Learn more at www.freescale.com/coldfire.
!
!