NXP Semiconductors S08P-LITE User manual

0
Quick Start Guide
S08P-LITE

1
BDM
Debugger
Header
GET TO KNOW THE S08P-LITE BOARD
Figure 1: S08P-LITE Callouts
Power/
OSBDM Micro USB
Quick Start Guide
Reset
J2 I/O Header
J1 I/O Header
S08PT60
SW2
LEDs
J3
I/O Header
J4
I/O Header
SW3
Touch
Electrode1/2
Figure 2: S08P-LITE Pin-Out

2
STEP-BY-STEP INSTRUCTIONS
WWW.NXP.COM
1. Connect the S08P-LITE board
to a PC using the included micro
USB cable to Power/OSBDM
Micro USB “J12.” A power LED
will illuminate.
2. The S08P-LITE comes preprogrammed with a demo which shows all the
peripheral functions on board, including the SPI Flash, IRDA transceiver, I2C
DAC, potentiometer, thermistor, and touch pads.
3. Explore more out of box demos and download software and tools on
www.nxp.com/S08P.
4. Enjoy your design freedom with the S08P-LITE.

3
SUPPORT
Visit www.nxp.com/support for a list of
phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for
complete warranty information.
Download installation
software and documentation at
www.nxp.com/S08P
Get Started