nzwardrobes Basket Set User manual






















Basket Set
Installation
Manual



Step 1)
A) Stand left side frame and right side frame with the top sitting on the floor
B) Make sure that the holes in the left and right side
frames are facing away from you.
Place the bottom rear crossmember (has holes) over
the rectangle hollows in the frame sides and use a
mallet to knock firmly into place using a mallet.
C) Rotate the frame around and repeat with the
opposite side.
Step 2)
A) Turn the frame so that the rear of the frame is now facing you. You should
see screw holes approx 50mm from the tip of the frame. Place a brace over the
frame uprights and bottom crossmember so that the holes line up with the holes
on the frame.













B) Using a screwdriver or power drill fix the screws into place.
Step 3)
A) Turn the frame over so that the feet are now sitting on the floor.
B) Fix the top front and rear crossmembers (no holes) into place the same as
step 1-B.
Step 4)
A) Fix the remaining brace into place and screw to the frame as in Step 2
Step 5)
A) Line the melteca top up with the top of the frame and press into place. The
hollowed out section on the melteca top should fit over the top crossmembers.
Step 6)
Insert the baskets by placing the baskets on
an angle and sliding into place.