O'jump 670 User manual

18/01/2021
1
N°289
(UK) Assembly Instructions
PE AS MMETRIC BARS
Ref. : 670

18/01/2021
2
Thank you for buying this product O'jump. We advise you to read the assembly instructions
carefully. The apparatus is presented in pre-assembled parts for a simplified assembly. We
have designed this O'jump product to bring you complete satisfaction. If you need help, the
O'jump team is at your disposal to accompany you.
Warning:
This equipment must only be used by one person at a time and under the supervision of a
qualified individual, with appropriate landing mats.
Using this equipment for purposes other than those originally intended is prohibited.
Recommendations:
- keep these instructions for subsequent reference (inspection, maintenance, etc.).
- periodically carry out predictive maintenance.
- depending on how much it is used, have the equipment serviced yearly or every few years.
Footprint and weight:
- Apparatus: 2.52 x 2.04 m 184 Kg

18/01/2021
3
Tools needed to assemble the apparatus.
Hardware listing (pre-assembled)
Hex wrench
N°18/19/24
Allen
wrench
N°
10,
M16x150
X12
X
20
Ø30xØ17
M16x130
X4
X4
M12x60
X8
Ø24xØ13
X4
M16
X4
M12
X2
M16
Elephant handle
X2
Indexing knob
X4
X2
Sliding handle
X4
Index
ing
pin

18/01/2021
4
List of parts (pre-assembled)
2
C
hassis
stand
s
(
2
packages
)
2 Chassis feet (2 packages)
2 Wooden hand-rails Ø40 (2 packages)
1 Pair Lower uprights (1 package)
1 Upper upright L&R (2 packages)
1 Pair of Braces + 1 Pair of Spreader (1 package)

18/01/2021
5
Chassis base
Hex wrench N° 24

18/01/2021
6
Lower upright & Brace Hex wrench N° 24

18/01/2021
7
Upper upright & Brace
Hex wrench N° 24

18/01/2021
8
Upper upright & Brace
Allen wrench N°10,

18/01/2021
9
Spreader
1
1
2
2
Hex wrench N° 18/19

18/01/2021
10
Repeat the operations on pages 6,7,8,9 for the opposite side

18/01/2021
11
1
2
1
2
To insert the
indexing
pin, press
the blue button to release the ball.
Hand-rails

18/01/2021
12
Unscrew
and pull
the
knob
to release
the slide. Slide up using the handle.
Release the knob in front of the
desired position. Lock the knob by
tightening.
Repeat the operation for the other
upright.
Sliding
handle
I
ndexing
knob
Warning:
Safety is always the main consideration when setting up an apparatus.
• It is important to always have a good understanding of the task.
• Use common sense.
. Always hold the Sliding Handle with one hand when unscrewing the knobs
. Risk of injury from sudden fall of the slide.
Height adjustment

18/01/2021
13
Spacing adjustment
Lift
the elephant handle up to release
the spreader. Slide up or down using
the handle. Put the window in front of
the desired position. Pull down the
elephant handle.
Repeat the operation for the other
spreader.
Window

18/01/2021
14
Moving the apparatus
Closed position
1
2
Open position
3
Warning:
Safety is always the primary consideration when moving an apparatus.
• It is important to always have a good understanding of the task.
• Use common sense.
. Always keep your feet out of reach of the apparatus
. Risk of jamming if the rollers are suddenly closed.