Oak furnitureland FINLEY User manual

ASSEMBLY
INSTRUCTIONS
ELECTRIC RECLINER
ARMCHAIR
FINLEY

STEP 1
STEP 2
STEP 3
STEP 8
Please follow these instructions carefully in order to ensure your new
sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your furniture as
this may damage the leather.
Please note that any creases in the leather are as a result of the
packaging and are perfectly normal. These will diminish over the first
few weeks of use at room temperature.
Remove the chair back main cushion (x1) and transformer from the sofa.
Press the front of the first button to recline your furniture. Press the rear of the first button to return to the upright position.
When fitting the chair back ensure the connecting clips are aligned and then
(with a person at each end) lower the back section into the base applying
firm pressure until you hear a “click” and the back is secure.
STEP 4
STEP 7
Pull the cable through the back of the chair as shown above.
STEP 6
Attach the leather cover at the back to the velcro strip to secure.
STEP 5
Connect the cable from the chair into the transformer provided and plug into
a standard mains socket.
STEP 10STEP 9
Connect both leads labelled ‘headrest’ together securing with attached clip.
Finley Power Motion Chair

*Failure to correctly assemble your furniture may affect your warranty
Please do not sit on the foot rest!
STEP 10
Press the front of the second button to press the headrest forward.Press the rear of the second button to return the headrest to the upright
position.
STEP 9

ASSEMBLY
INSTRUCTIONS
2 SEATER ELECTRIC
RECLINER SOFA
FINLEY

Finley Power Motion Sofa
STEP 1 STEP 2
STEP 3
STEP 8
Please follow these instructions carefully in order to ensure your new
sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your furniture as
this may damage the leather.
Please note that any creases in the leather are as a result of the
packaging and are perfectly normal. These will diminish over the first
few weeks of use at room temperature.
Remove the sofa back main cushions (x2) and transformer from the sofa.
Press the front of the first button to recline your furniture. Press the rear of the first button to return to the upright position.
When fitting sofa backs ensure the connecting clips are aligned and then
(with a person at each end) lower the back section into the base applying
firm pressure until you hear a 'click'and the back is secure.
STEP 4
STEP 7
Pull the cables through the back of the sofa as shown above.
STEP 6
Attach the leather cover at the back to the velcro strip to secure.
STEP 5
Connect the cables from the sofa into the transformer provided and plug into
a standard mains socket.
STEP 10STEP 9
Connect both leads labelled ‘headrest’ together securing with attached clip.

*Failure to correctly assemble your furniture may affect your warranty
Please do not sit on the foot rest!
STEP 10
Press the front of the second button to press the headrest forward.Press the rear of the second button to return the headrest to the upright
position.
STEP 9

ASSEMBLY
INSTRUCTIONS
3 SEATER ELECTRIC
RECLINER SOFA
FINLEY

Finley Power Motion Sofa
STEP 1 STEP 2
STEP 3
STEP 8
Please follow these instructions carefully in order to ensure your new
sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your furniture as
this may damage the leather.
Please note that any creases in the leather are as a result of the
packaging and are perfectly normal. These will diminish over the first
few weeks of use at room temperature.
Remove the sofa back main cushions (x2) and transformer from the sofa.
Press the front of the first button to recline your furniture. Press the rear of the first button to return to the upright position.
When fitting sofa backs ensure the connecting clips are aligned and then
(with a person at each end) lower the back section into the base applying
firm pressure until you hear a 'click'and the back is secure.
STEP 4
STEP 7
Pull the cables through the back of the sofa as shown above.
STEP 6
Attach the leather cover at the back to the velcro strip to secure.
STEP 5
Connect the cables from the sofa into the transformer provided and plug
into a standard mains socket.
STEP 10STEP 9
Connect both leads labelled ‘headrest’ together securing with attached clip.

*Failure to correctly assemble your furniture may affect your warranty
Please do not sit on the foot rest!
STEP 10
Press the front of the second button to press the headrest forward.Press the rear of the second button to return the headrest to the upright
position.
STEP 9