Oak furnitureland GOODWOOD FABRIC User manual

ASSEMBLY
INSTRUCTIONS
ELECTRIC RECLINER
ARMCHAIR
GOODWOOD FABRIC

Please follow these instructions carefully in order to ensure
your chair is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
Remove the bag of electrics from the connecting clip on the
back of the chair.
Connect the power as shown above.
When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base applying
firm pressure until you hear a 'click'and the back is secure.
Remove the back cushion and arm pads from the
chair, as shown above.
Remove the protective backing cloth from the
Velcro strips, position the arms using the Velcro
to secure in place and attach with the zip,
as shown above.
Attach the back cover to the velcro strip at the
bottom to secure.

STEP 7 STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Please do not sit on the foot rest! Please do not sit on the arm rest!
Press the front button to recline your furniture. Press the rear button to return to the upright position.

ASSEMBLY
INSTRUCTIONS
2 SEATER ELECTRIC
RECLINER SOFA
GOODWOOD FABRIC

STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
Remove the protective backing cloth from the Velcro strips,
position the arms using the Velcro to secure in place and to
attach with the zip as shown.
Your sofa should now be fully assembled.
When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base
applying firm pressure until you hear a 'click'and the back
is secure.
Remove the bag of electrics from the connecting clip
on the back of the sofa.
Remove the back cushions and arm pads from the sofa,
as pictured above.
Attach the back cover to the velcro strip at the bottom
to secure.
Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.

STEP 7 STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Press the front button to recline your furniture.
Press the rear button to return to the upright position.
Connect the cables from the sofa into the transformers
provided and plug into a standard mains socket as
diagram above.
Please do not sit on the foot rest!

ASSEMBLY
INSTRUCTIONS
3 SEATER ELECTRIC
RECLINER SOFA
GOODWOOD FABRIC

Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of the
packaging and are perfectly normal. These will diminish over
the first few weeks of use at room temperature.
STEP 1STEP 2
STEP 3STEP 4
STEP 5STEP 6
Remove the protective backing cloth from the Velcro strips,
position the arms using the Velcro to secure in place and
attach with the zip as shown.
Attach the back cover to the velcro strip at the
bottom to secure.
Your sofa should now be fully assembled.
Remove the cushions and arm pads from the sofa as
pictured above.
Remove the bag of electrics from the connecting
clip on the back of the sofa. When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base
applying firm pressure until you hear a 'click'and the back
is secure.

STEP 7STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Press the rear button to return to the upright position. Please do not sit on the foot rest!
Connect the cables from the sofa into the
transformers provided and plug into a standard
mains socket as diagram above.
Press the front button to recline your furniture.

ASSEMBLY
INSTRUCTIONS
ELECTRIC RECLINER
ARMCHAIR
GOODWOOD LEATHER

Please follow these instructions carefully in order to ensure
your chair is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
Remove the bag of electrics from the connecting clip on the
back of the chair.
Attach the back cover to the velcro strip at the
bottom to secure.
Connect the power as shown above.
When fitting sofa backs ensure the connecting clips are aligned
and then lower the back section into the base applying firm
pressure until you hear a 'click'and the back is secure.
Remove the back cushion and arm pads from the
chair, as shown above.
Remove the protective backing cloth from the Velcro
strips, position the arms using the Velcro to secure in
place and attach with the zip, as shown above.

STEP 7 STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Please do not sit on the foot rest! Please do not sit on the arm rest!
Press the front button to recline your furniture. Press the rear button to return to the upright position.

ASSEMBLY
INSTRUCTIONS
2 SEATER ELECTRIC
RECLINER SOFA
GOODWOOD LEATHER

Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
Remove the protective backing cloth from the Velcro
strips, position the arms using the Velcro to secure in place
and to attach with the zip.
Your sofa should now be fully assembled.
Attach the back cover to the velcro strip at the
bottom to secure.
Remove the bag of electrics from the connecting clip
on the back of the sofa.
Remove the back cushions and arm pads from the
sofa, as pictured above.
When fitting sofa backs ensure the connecting clips are aligned
and then lower the back section into the base applying firm
pressure until you hear a 'click'and the back is secure.

STEP 7 STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Press the front button to recline your furniture.
Press the rear button to return to the upright position.
Connect the cables from the sofa into the
transformers provided and plug into a standard
mains socket,as diagram above.
Please do not sit on the foot rest!

ASSEMBLY
INSTRUCTIONS
3 SEATER ELECTRIC
RECLINER SOFA
GOODWOOD LEATHER

Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 1STEP 2
STEP 3STEP 4
STEP 5STEP 6
Remove the protective backing cloth from the Velcro strips,
position the arms using the Velcro to secure in place and
attach with the zip as shown.
Attach the back cover to the velcro strip at the
bottom to secure.
Your sofa should now be fully assembled.
Remove the cushions and arm pads from the sofa,
as pictured above.
Remove the bag of electrics from the connecting
clip on the back of the sofa. When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base applying
firm pressure until you hear a 'click'and the back is secure.

STEP 7STEP 8
STEP 9 STEP 10
*Failure to correctly assemble your furniture may affect your warranty
Press the rear button to return to the upright
position.
Please do not sit on the foot rest!
Connect the cables from the sofa into the
transformers provided and plug into a standard
mains socket as diagram above.
Press the front button to recline your furniture.

ASSEMBLY
INSTRUCTIONS
MODULAR CORNER SOFA
GOODWOOD

Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of the
packaging and are perfectly normal. These will diminish over
the first few weeks of use at room temperature.
STEP 1STEP 2
STEP 3STEP 4
STEP 5STEP 6
 


 

 



