OAKWORKS MEDICAL PRODUCTS PT100 User manual

USER MANUAL
www.oakworksmed.com · 717.235.6807
made in the USA
with US & imported parts
OAKWORKS®
PT Tables
PT100
PT150
PT250
PT300
PT400 PT400M

© Copyright 2021
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Product Use Description ............................................................................................. 1
Important Safety Instructions
Symbol Identification ........................................................................................... 1
Safety Instructions ........................................................................................... 1-2
Product Description & Photo
PT100 ................................................................................................................. 3
PT150 ................................................................................................................. 4
PT250 ................................................................................................................. 5
PT300 ................................................................................................................. 6
PT400 ................................................................................................................. 7
PT400M ............................................................................................................. 8
Orthopedic Hi-Lo Casting Table .......................................................................... 9
Installation
Grounding ......................................................................................................... 10
Directions for Use
Control Operations
All Tables Except - PT400, PT400M & PX300.......................................... 11
PT400 & PT400M................................................................................ 12-13
Adjusting the Back Rest ................................................................................... 14
Optimal Positioning for PT400 Tables .............................................................. 14
Articulating Head Rest Use .............................................................................. 15
Side Rails Use ................................................................................................. 15
PT400M - Rotating Arm Rests Use................................................................... 16
PT400M - Removable Extension Pad Use........................................................ 16
Moving the table................................................................................................ 17
Dual Locking Casters Use ................................................................................ 17
Table Extender Use.......................................................................................... 18
QuickLock Face Rest Use ................................................................................ 18
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 19
Cleaning Process .............................................................................................. 19
Inspections & Maintenance ....................................................................................... 20
Warranty Information ................................................................................................ 20
Model Number & Serial Number
PT Series .......................................................................................................... 21
Specifications
Product Specifications...................................................................................... 22
Environmental Conditions................................................................................. 22
Electrical Specifications.................................................................................... 22
Guidance and manufacturer’s declaration -
Electromagnetic emissions ............................................................................... 23
Recommended separation distances ................................................................ 23
Guidance and manufacturer’s declaration -
Electromagnetic immunity............................................................................ 24-25
Contact Information .................................................................................... back cover

This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual and on product labels, indicates that the table
and components are a Type B Applied Part pursuant to IEC 60601-1.
This symbol, when used in documentation on this product, indicates alternating
current (AC).
This symbol, when used in documentation on this product, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
PRODUCT USE DESCRIPTION
The Oakworks PT Tables are used to support the patient during examinations and procedures. They
are intended to be operated by a healthcare professional in a medical environment. No special train-
ing is required but a review of the following Safety Instructions is important for the safety of the oper-
ator and patient. The healthcare professional should read and understand this entire manual before
use with a patient. There are no known contraindications to the use of this equipment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
The Table should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the table should be observed to verify normal operation in the configuration in which it will be used.
The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any
other equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It
is the responsibility of the operator of this equipment to insure that bystanders are not in the area below
or around this equipment during operation.
IMPORTANT SAFETY INSTRUCTIONS

Proper operation of this equipment is very important for the safety of the operator, patient, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (patient and accessories) 550 lbs. (250 kg) Do not exceed.
The Back Rest and Leg Rest sections are not designed to support the entire weight of the patient. Do
not sit on the Back Rest or Leg rest sections.
Be certain that the table is completely lowered without any tilt being present prior to discharging an
ambulatory patient. The patient may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion
(like stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use attachments
not recommended by the manufacturer.
Close supervision is necessary when this furnishing is used near children or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before
use.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being adminis-
tered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding
Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located under the table seat. No user ser-
viceable parts are inside the control box. Refer servicing to qualified personnel. Unplug wall plug prior to
contact with any cables connected to the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS

3
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT100
Optional Dual
Locking Casters
STANDARD SPECIFICATIONS
Height Range Powered 16”-34” (40-86 cm.)
Foot Control Height Motion
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 27” (69 cm.) or 29” (74 cm.)
Length 73” (185 cm.)
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam
Table Weight 155 lbs. (70 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control

4
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT150
STANDARD SPECIFICATIONS
Motion 1 Powered 16”-34” (40-86 cm.) Height Range
Motion 2 Manual 0º - 90º Fowler Backrest
Foot Control Height Motion
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 29” (74 cm.) or 31” (79 cm.)
Length - 2 Section top 39” (99 cm.) Backrest section
36” (92 cm.) Seat section
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam
Table Weight 160 lbs. (73 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
ACCESSORIES
(1) or (2) Side Rails
Optional Dual
Locking Casters

5
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT250
STANDARD SPECIFICATIONS
Motion 1 Powered 16”-34” (40-86 cm.) Height Range
Motion 2 
Foot Control Height Motion
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 27” (69 cm.), 29” (74 cm.), or 31” (79 cm.)
Length - 2 Section top 62” (157 cm.) Seat section
10” (25 cm.) Head Rest
Padding 1.75” (4.4 cm.) Firm Response
OR
2.5” (6.4 cm.) Comfort Foam
Table Weight*151 lbs. (68 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
Optional Dual
Locking Casters

6
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT300
STANDARD SPECIFICATIONS
Motion 1 Powered 16”-34” (40-86 cm.) Height Range
Motion 2 Manual 0º - 90º Fowler Backrest
Motion 3 
Foot Control Height Motion
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 27” (69 cm.), 29” (74 cm.), or 31” (79 cm.)
Length - 3 Section top 39” (99 cm.) Fowler Backrest
23” (28 cm.) Seat Section
10” (25 cm.) Head Rest
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam
Table Weight 160 lbs. (73 kg)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
ACCESSORIES
(1) or (2) Side Rails
Optional Dual
Locking Casters

7
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT400
STANDARD SPECIFICATIONS
Motion 1 Powered 17”-34” (43-86 cm.) Height Range
Motion 2 
Motion 3 Manual 0º - 82º Fowler Backrest
Motion 4 
Foot Control All powered motions
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 27” (69 cm.), 29” (74 cm.), or 31” (79 cm.)
Length - 3 Section top 28” (97 cm.) Fowler Backrest
22” (56 cm.) Seat Section
10” (25 cm.) Head Rest
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam
Table Weight 198 lbs. (90 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
ACCESSORIES
(1) or (2) Side Rails
Optional Dual
Locking Casters

29.5”
(75 cm.)
11”
(29 cm.)
44.5”
(113
cm.)
22” (56 cm.) 77”
(196
cm.)
21.5”
(55
cm.)
16.25”
(41 cm.)
4.5”
(11 cm.)
Shown with accessories;
Rotating Arm Rests & Extension Pad
8
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
PT400M
STANDARD SPECIFICATIONS
Motion 1 Powered 17”-34” (43-86 cm.) Height Range
Motion 2 
Foot Control All powered motions
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 29.5” (75 cm.)
Length - Contoured 2
Section Top
44.5” (113 cm.) Foot End
21.5” (55 cm.) Chest Section
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam OR
4” (10 cm.) Comfort Foam
Table Weight 186 lbs. (84 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
ACCESSORIES
PT400M - Rotating Arm Rests (2)
PT400M - Shelf Bracket
PT400M - Extension Pad
QuickLock Platform & Boiance Face Pad
Optional Dual
Locking Casters

9
PRODUCT DESCRIPTION
For electrical specs, see Specifications section.
Orthopedic Hi-Lo Casting Table
STANDARD SPECIFICATIONS
Motion 1 Powered 17”-35” (43-89 cm.) Height Range
Motion 2 Manual 0º - 90º Fowler Backrest
Motion 3 
Section
Foot Control Height Motion
Table Voltage Options 120V/60Hz or 230V/50Hz
Table Capacity 550 lbs. (250 kg.) (patient and accessories)
Widths 31” (79 cm.)
Length - 3 Section top 38” (97 cm.) Fowler Backrest
22” (56 cm.) Seat section
10” (25 cm.) Casting section
Padding 1.75” (4.4 cm.) Firm Response OR
2.5” (6.4 cm.) Comfort Foam
Table Weight 165 lbs. (75 kg.)
OPTIONS
Dual Locking Casters
2 Button Hand Control (Height Motion)
Second Foot Control
ACCESSORIES
Second Side Rail
Optional Dual
Locking Casters

10
The Tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is
rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
This product must be grounded. If it should malfunction or break down, grounding provides a path
of least resistance for electrical current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor and a grounding pin. The pin must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances. See U.S. sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

INSTALLATION
GROUNDING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have
a proper outlet installed by a qualified electrician.
Grounding Methods

P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
UP DOWN
CAUTION
CONTROL OPERATIONS - ALL TABLES (EXCEPT PT400 &
PT400M)
Be sure the self-locking molded rubber feet are flat side down to ensure safety and stability.
The PT tables offer height positioning with electronic ease. Operate the Foot Control and Optional Hand
Control as shown below to raise or lower the height of the table.
11
DIRECTIONS FOR USE
FOOT CONTROL OPERATION
UP DOWN
HAND CONTROL OPERATION (OPTIONAL)

CAUTION
FOOT CONTROL OPERATIONS - PT400 & PT400M TABLES ONLY
DO NOT sit or stand on the articulating head rest section. Be sure the self-locking molded rubber feet
are flat side down to ensure safety and stability.
The O®PT400 and PT400M tables offer height and center break positioning with electronic ease.
Operate the Foot Control as shown below to raise or lower the height and center break functions of
the table.
12
DIRECTIONS FOR USE
Center Break
DOWN
Center Break
UP
Height DOWN
Height UP

P/N: 71567-1 P/N: 71569-1P/N: 71568-1
Clear Window
Blue PMS #283C
CAUTION
HAND CONTROL OPERATIONS - PT400 & PT400M TABLES ONLY
DO NOT sit or stand on the articulating head rest section. Be sure the self-locking
molded rubber feet are flat side down to ensure safety and stability.
The O®PT400 and PT400M tables offer height and center break positioning with electronic ease.
Operate the Optional Hand control as shown below to raise or lower the height and center break
functions of the table.
13
DIRECTIONS FOR USE
Center Break
DOWN
Center Break
UP
Height UP Height DOWN

Watch the video!
Dr. Robert DuVall,
PT, DHSc, ATC, OCS, SCS, FAAOMPT CSCS
At the Oakworks® factory in PA
reviewing the Oakworks® PT400.
Dr. Robert DuVall demonstrates the features of the PT400 table.
Scan this QR code with
your smartphone or visit
www.oakworksmed.
com to view the PT400
video.
Posterior pelvic tilt
Side bend
to elongate
the quadra-
tus lumbo-
rum
Back Rest
Control
TO LOWER THE BACKREST:
Press the lever under the head section and
push the back rest down.
TO RAISE THE BACKREST:
Raise the back rest by pressing the lever
under the head section and lifting up to the
desired height. It is recommended that clients
take some of their weight off the back rest
while you lift.
CAUTION
ADJUSTING THE BACK REST SECTION
Do not sit on the Backrest section.
14
DIRECTIONS FOR USE
OPTIMAL POSITIONING FOR PT400 TABLES

Grasp Firmly
& Lift
Release
Knob
CAUTION
ARTICULATING HEAD REST USE
Do not sit or stand on the articulating head rest section. Do not use Head Rest Section in assisting
the client on or off the table.
15
DIRECTIONS FOR USE
TO RAISE THE HEAD REST
Grasp the edge of the section and lift up until you
have achieved the angle needed. Release and it will
lock into place automatically.
TO LOWER THE HEAD REST:
Twist and hold the knob under the head rest and
push the head rest down. Release the knob and the
head rest will stay in place.
TO LOWER SIDE RAILS
Push side rail in lightly towards the center of the table,
then push locking knob down towards the table base.
Fold side rails down and under the table.
TO RAISE SIDE RAILS
Grasp side rail and rotate to the raised position. When
fully up, the side rail will lock into position. Check that
the rail is locked by applying light outward pressure.
SIDE RAIL USE

Be sure to install the arm rest on the
correct side of the table. The arm rest
will contour to the table top as shown.
Screw the Extension Pad
Attachment Bracket into
the head end of the table
using the pre-drilled hole.
Be sure to angle the
bracket as shown above.
Insert the Extension Pad
dowels into the bracket.
Insert the QuickLock™ Face
Rest platform dowels into the
Accessory Mounting Plate that is
attached to the table.
Adjust the Face Rest and
Pad as needed.
EXTENSION PAD USED AS A LOWERED ARM REST
EXTENSION PAD USED AS A TABLE EXTENDER
Insert Extension Pad dowels into the Accessory
Mounting Plate located at either end of table.
PT400M - ROTATING ARM RESTS USE
16
DIRECTIONS FOR USE
Screw the Arm Rests into the pre-
drilled hole on the under side of each
side of the table.
Adjust the Arm Rests as needed for
support and patient access.
PT400M - REMOVABLE EXTENSION PAD USE

All casters should be locked at all times during use with a patient.
DUAL LOCKING CASTERS USE
LOCKING THE CASTERS
1. Place your shoe on the end of the casters locking
tab.
2. Press firmly downward until you hear a clicking
noise and the caster is locked.
UN-LOCKING THE CASTERS
1. Place your shoe on top of the casters locking tab.
2. Press firmly inward and downward until you hear a
clicking noise and the caster is unlocked.
The tables are equipped with two wheels at one end and two self-locking, molded rubber feet at the other. When
ready to move the table, first lower the table to its lowest position. On models with a back rest, it is recommended
to raise the back rest to a high position. Then be sure the power source is disconnected. Place the cord & all con-
trols out of the way on top of your table before moving the table. Lay a towel or a cloth down on your table top to
protect the surface from any debris from the bottom of your foot control.
Two people are required to safely move the table. Grasp the table frame securely at the end with the molded rub-
ber feet. Raise the table to allow the wheels at the foot end to move freely. Bending at the knees before lifting to
prevent back strain or possible injury.
Move the table carefully to the next location, lower the table and release. Check the self-locking molded rubber
feet to be sure they are flat side down. This position “locks” the table and allows sturdy height adjustments. Place
the foot controls in position on the floor. Connect the power cord to the outlet and test the foot control.
CAUTION
MOVING THE TABLE
Before moving any of the Tables, disconnect the power cord from the power outlet. The table weighs
as much as 200 lbs. (91 kg.) Use extreme caution when lifting the table to move it. Two people are
required to move the table safely. DO NOT use the table to transport a patient.
17
DIRECTIONS FOR USE
Grasp the
table frame
securely here
at both sides
of the brace.