OASIS PATIO OW4S User manual

item #: ow4s (bench)
assembly instructions

a phillips head screwdriver is required for assembly
(not included)

Insert barrel nut (B) into bench back (1). Attach bench side (3) to bench back (1) using bolts (A). Tighten
bolts (A) firmly with wrench (D).
Insert barrel nut (B) into bench back (1). Attach bench side (2) to bench back (1) using bolts (A). Tighten
bolts (A) firmly with wrench (D).

Carefully insert bench seat (4) into the bench assembly.
Insert barrel nuts (B) into bench seat (4). Secure bench seat (4) to bench sides (2,3) using bolts (A). (Bolts
(A) will be inserted through bench sides (2,3) and will screw into barrel nuts (B).) Tighten bolts (A)
firmly with wrench (D).

Secure bench seat (4) to bench back (1) using screws (C). Tighten screws (C) firmly with a screwdriver.