
Power on
Press and hold the ‘Power’
button for 1 second to turn on the
drone. When the LED turns green,
it is ready to play.
Power off
Press and hold the ‘Power’ button for 2 seconds to turn off the drone.
The LED light should go off when the drone is off.
Charging the drone
It takes 40 minutes to fully charge the drone. During charging, the
LED light on the USB charger is turned on. When the battery is full,
the LED light on the USB charger will turn off.
A red LED on the drone indicates low battery.
Adjusting the speed
Make sure the drone is turned on. Press the ‘Power’ button to
toggle between normal and fast speed.
• Green LED light = Normal speed
• Blue LED light = Fast speed
Calibration
If your drone is flying abnormally, please calibrate the drone.
1. Turn the drone over and press the ‘Power’ button 3 times. The
LED light should begin flashing.
2. Quickly turn the drone back to its normal position and place it on
flat ground.
3. Drone calibration is complete when the LED light stays solid.
How to play
With the drone turned on, place the drone on the palm of an
extended arm. Lower your arm in a swift movement. The drone will
start flying automatically.
When the drone detects an object, it will move in the opposite
direction. Avoid playing near glass, dark objects or a strong light
source.
Note: The drone will ascend and hover in the air. When the drone’s
proximity sensors are not activated for 2 seconds, it will
automatically descend to previous height.
To stop, grab the drone and flip it over as illustrated.
Designed in Singapore. Manufactured in China.
©2019 Oaxis Asia Pte Ltd. All Rights Reserved.
http://myfirst.tech