Obihai OBi202 User manual

Off The port is not enabled.
Solid Green The phone is ready to be used.
Flashing Green The phone is in use.
Off The OBi is not receiving power.
Solid Green The OBi is operational.
Flashing Green The OBi is looking for a DHCP IP address.
Flashing Orange The OBi is upgrading. Do not unplug power!
Solid Red The OBi is non-operational.
Flashing Green Light flashes when there is data activity
(Intermittent) (Intermittent) on the Internet Ethernet port.
Flashing Green Light flashes when there is
(Intermittent) data activity on the LAN
Ethernet port.
Power
Internet
LAN
USB*
Phone 2
Phone 1
OBi202 Rear
Power Outlet Internet Router Computer/LAN Phone 2 Phone 1
or Modem
(optional) (optional)
OBi202 Connections
A. Connect a phone to the green PHONE 1 port - Use cable currently connected to phone.
Note: An optional second phone or fax machine can be used with the Phone 2 port.
B. Connect one end of the Ethernet cable to the blue INTERNET port and the other end to an
Ethernet port on your Internet router, broadband modem or Ethernet switch.
C. Connect the power adapter to the OBi power jack and a power outlet.
Please observe the following steps to install the OBi.
OBi202 Installation
OBi202 Device Ethernet Cable Power Adapter
Please check to see that you have the following:
1. OBi202 Device
2. Ethernet Cable
3. Power Adapter
You will also need:
1. One touch tone phone.
This can be an analog or digital, corded or cordless phone. This can be an analog or digital, corded or cordless phone.
2. An active Internet connection.
3. Access to the Internet via an Ethernet port on your router or modem.
Note: You may use the OBi202 as a router by connecting the OBi202 directly to your broadband modem.
4. (Optional but very useful) An Internet phone service subscription with all
required username and password credentials.
*The OBi202 USB port may be used to connect an external storage device.
Installation Requirements
Step 1 Step 2
Copyright © 2012 Obihai Technology, Inc. All rights reserved.
Thank you for choosing Obihai Technology www.obihai.com
OBiTalk Network - Do Not Use For Emergency Service Calls
Obihai Technology does not warrant the availability or quality of the OBiTalk network.
Furthermore, Obihai Technology will not be liable to you or any third party for any costs
or damages arising directly and or indirectly from the use of this product’s hardware &
software including without limits any damage, or for any loss whatsoever.
Replacement, Repair, Refund
After the acceptance of a Return Material Authorization (RMA) request, Obihai will
attempt to refund, repair or replace the product. To request an RMA, please contact
the party from whom you purchased the product.
1-Year Limited Hardware Warranty
Obihai Technology provides a 1-Year limited hardware warranty. Obihai warrants
to customer that this product will conform to its published specifications and will be
free from defects in material and workmanship at the time of delivery and for a period
of 1-Year thereafter. Without limiting the foregoing, this warranty does not cover any
defect resulting from (a) any design or specification supplied by an entity other than
Obihai, (b) non-observance of technical operating parameters (e.g. exceeding limitingObihai, (b) non-observance of technical operating parameters (e.g. exceeding limiting
values) or (c) misuse, abuse, using in abnormal conditions or alterations of any kind.
Warranty Information
www.obihai.com
With Regulatory, Compliance & Safety Information
Installation & Configuration Guide
Quick Start Guide

iPhone & iPod touch are trademarks of Apple Computer, Inc.
Google Voice and Android are a trademarks of Google, Inc.
OBi, OBiTALK are trademarks of Obihai Technology, Inc.
* * *
OBi Device Manager Web Page Access:
1. From a phone attached to the OBi, dial to access
the OBi config attendant.
2. Choose “1” to hear the IP address of the OBi.
3. Enter the OBi IP address in a local PC browser web
site address window:
4. When prompted, enter “4. When prompted, enter “admin” for username &
“admin” for password.
How to Perform a Factory Reset:
1. Power on the OBi device.
2. Locate the Factory Reset button access hole on the bottom of
the OBi. It is a circular hole (a little larger than the others) just
above and to the left of the Model ID on the product label.
3. Using a paper clip or similar instrument, depress the button
inside the hole for 15 seconds. inside the hole for 15 seconds.
4. The Power LED will flash red. This indicates you may release
the button and the OBi will now be reset to its factory defaults.
Note: A service provider may restrict some settings from being reset to a factory default.
This equipment has been tested & found to comply with a Class B digital device in accordance with the specifications of the FCC rules.
This product bares the CE marking indicating compliance with the 89/336/EEC directive.
Important: Only an analog telephone or fax machine should be connected to the OBi PHONE port. Do not connect a cable from
the PHONE port to a telephone jack powered by the phone company. Doing so may cause damage to the OBi electronics.
For indoor use only. Read installation instructions before connecting to a power source. The electric plug & socket must be acces-
sible at all times as this is the main method to disconnect power from the device. Shock Hazard: Do not operate near water or similar
fluid. Do not work with this device during periods of lightning activity. Do not touch wires at end of the phone cables or inside sockets.
Do Not Use OBiTALK for Emergency Calls or Contacting Emergency Services
This equipment is not intended to be used to call emergency services like 911, 112, 999, 000.
Compliance & Safety Information
Visit Our Web Site at: www.obihai.com/support.html
Here You Will Find:
Frequently Asked Questions
Support Forum - Got a Question Or Comment? Post It at the Forum
Tutorials, Tips & Wizards - Learn About & Get the Most from Your OBi
Downloads & Documentation - OBi Software & Documentation
Contact Support at: Contact Support at: [e-mail] - Please Provide Your OBi Number
How to Get Support & Learn More
After you register and add your OBi device at www.obitalk.com, the OBi
Device Configuration page will help you set-up commercial VoIP services
such as the Google Voice
TM
communication service.
Do this by selecting the Google Voice Set-Up button. You may also select
from any one of the other listed service providers. If your service is not there,
you may use the Generic Service Provider option.
Generally, all you will need to set-up a service is Generally, all you will need to set-up a service is
the User Name and Password for the service.
Note: You will need to choose what phone
port is to be used with the selected service.
By default, both phone ports - Phone 1 & Phone 2,
will work with the first service you initially configure on your OBi202.
Set-Up VoIP Services
Step 5
www.obitalk.com
The first time you log-in to OBiTALK, a pop-up
window will appear allowing you to add your device.
Click "Yes" to add Your OBi Device to the
OBiTALK Dashboard. After adding your
device, you will be able to set-up voice
services and other configuration information.
Multiple devices may be added to a single account.Multiple devices may be added to a single account.
Follow the on-screen instructions to add your
OBi device to your OBiTALK account.
Once added, you will be directed to the
Device Configuration page.
- Set your OBi display name, time zone,
and daylight savings values.
-- Select the “Save Changes” button.
Go to: www.obitalk.com
Register for an OBiTALK account.
This will allow you to easily activate
devices and add any commercial VoIP
services used with your OBi.
Mary
John
To call Mary, John dials:
9 followed by
123 456 789
**
**
Your OBi is ready to make FREE calls to other OBi endpoints using the OBiTALK network.
On the bottom of your unit, you will see a 9-digit OBi Number. This is your OBi Number.
Give this number to your friends, family and colleagues so they can call you from their OBi
device or using the OBiON iPhone and Android apps for smart phones.
To use the OBiTALK network, all you have to do is install your OBi, pick up the phone and
then call your friends by dialing 9 and their nine-digit OBi Number.
222 222 222
OBiTALK Test No:
* *
Dial 9 followed by:
At any time, you may place a test call to the OBi Number below:
Make a Test Call Using OBiTALK
Set-Up an OBiTALK Account
Then Add Your OBi to the Account
Step 4
Step 3