Ocean Matrix OMX-02HMHM0001 User manual

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
Specifications
Compliance HDCP , MHL2.0
Certification FCC, CE
Transmission Distance 4K2K@30Hz up to 49.21 Ft / 4K2K@24Hz up to 65.62 Ft
Video Resolutions up to 4K x 2K (3840 x 2160 @ 30Hz)
Audio Formats PCM, Dolby Digital, DTS Digital Surround
Power Consumption 1.5W
Dimensions 2 7/8 x 2 1/2 x 7/8 Inches
Weight 4.9 oz
Deep Color Up to 36-bit Color at 1080P60Hz
Bandwidth Frequency 10.2Gbps
1080P (24/30Hz)
HDMI Source Device
Connect Digital
Audio Equipment
INSTALLATION & SPECIFICATIONS
OMX-02HMHM0001
1080P to 4K2K Scaler with S/PDIF Audio Extractor/De-Embedder
Display
AV Receiver
EDID Switch Settings
Includes:
(1) 5VDC/1A Power Supply
2-Mounting Brackets
4-Screws
HDMI
Cable
HDMI
Cable
Optical Fiber
Cable
HDMI InputPower Input
LED
HMDI
Indicator
HDMI Output Audio Optical
Output EDID Switch
Position
1 2 3
0 0 0 108P 3D Pass Through
0 0 1 1080P 3D 2.0CH PCM
0 1 0 1080P 3D 5.1CH AC3, DTS
Audio Output
0 1 1 Reserved
1 0 0 Reserved
1 0 1 Reserved
Function
1 1 0 Reserved
1 1 1 Upscale 1080P@24/30Hz to
4Kx2K (3840*2160)

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
SAFETY PRECAUTIONS
 To prevent fire or shock hazard, do not expose this equipment to dust or high humidity. Do not use in an
unprotected outdoor installation or in areas classified as overly damp or wet.
 The installation temperature should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme
changes of temperature over a short period of time.
 Do not place the unit on an unstable base and avoid heavy impact.
 Proper ventilation is required for permanent installation. Do not block or cover enclosure openings as they protect the unit from
overheating.
 Prior to cleaning, turn the power off and unplug the unit from all connections. Use a damp cloth. Do not use liquid or aerosol
cleaners.
 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Enclosure entry is dangerous. Never push objects of any kind, including liquids, through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock.
 Do not open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards.
 There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or authorized repair
service company.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Federal Communications Commission (FCC) Compliance Notices