Ocean Matrix OMX-HDMI-HDB1X8 User manual

OMX-HDMI-HDB1X8
Ocean Matrix 1x8 HDMI Extender Splitter
Set - 1080p60 Over CAT5/5e/6

Splits a single HDMI input signal into 8 HDMI output signals identical to the input
Extends HDMI signals up to 120m over CAT5/5e/6 cable
Supports full HD resolutions up to 1080p@60Hz
Plug and play
Rugged metal mountable housing
Lightning, surge, and ESD protected
TThe Ocean Matrix OMX-HDMI-HDB1X8 splitter extender system over a single Cat5/Cat5e/Cat6
distributes 1 HDMI source to 8 HDMI displays simultaneously. This system extends high definition
audio/video transmission beyond the standard distances for HDMI cable limitations via HDbitT
technology. The OMX-HDMI-HDB1X8 delivers full 1080P HDMI signal up to 394 feet over a single
Cat6 network cable. An IR signal transmission allows for remote control of the source at a
secondary location with IR extension cables (included).
Ideal for projection screens, remote conferencing, CCTV, high-end security, and remote HD
monitoring.
Description:
Features:
Specifications:
Inputs: 1 x HDMI
Outputs: 8 x RJ45
HDMI Version: HDMI1.3 Compatible with HDCP1.4
Supported Resolutions: 480i@60Hz / 480p@60Hz / 576i@50Hz / 576p@50Hz / 720p@50/60Hz
/ 1080i@50/60Hz / 1080p@50/60Hz
Transmission Distance: 1080p 60Hz up to 120m with full HD over a single CAT6 cable
IR Signal: Supports 20-60kHz IR device
Operating Temperature: 32°F - 140°F (0°C - 60°C)
Power Supply: DC12V/3A
Power Consumption: < 24W
Dimensions (LxWxH): TX: 11.75 x 4.33 x 1.17in RX: 3.70 x 3.80 x 0.93in
Weight: TX: 1.75lbs RX: 0.30lbs
Item Includes:
1 x OMX-HDMI-HDB1X8 Extender Set (1 x Extender 8 x Receivers)
1 x DC12/3A Adapter
8 x DC5/1A Adapter
1 x IR Blaster Extension Cable
8 x IR Receiver Extension Cable

Operation Controls and Functions:
Transmitter:
Receiver:

Operation Controls and Functions:
1080p@60Hz
Lower Latency
120m Transmission
1 in 8 Out
IR Passback
Plug and Play
7x24 Hours
Lightning Protection
Surge Protection
ESD Protection

Display shows "Waiting for Connection":
Ensure power supply is firmly connected
Display indicates there is a signal loss:
Check all connections
Connect the signal source directly to the display device to ensure there is a
signal output. Change the signal source if necessary.
Degraded video signal:
Check cable lengths between the TX to the switch, the switch to RX
Ensure the connection between each level is within required ranges
Press the RESET button on the TX/RX front panel, reset and reconnect
Troubleshooting:
Connection:
Connect HDMI input with HDMI output of source device
Connect IR blaster extension cable to the IR extender out port
Connect RJ45 port with RJ45 input port of HDMI extender RX
Connect HDMI output of HDMI extender RX to HDMI input of HDTV and set the
source input to the correct HDMI input channel
1.
2.
3.
4.
Installation:
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Cat6 Network Cable - follow the IEEE-568B wiring standard:
1.
2.
3.
4.
5.
6.
7.

The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged
(b) Objects or liquids have gotten into the unit
(c) The unit has been exposed to rain
(d) The unit does not operate normally or exhibits a marked change in performance; The unit has been
dropped or the cabinet is damaged.
(2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
(3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer. Unauthorized substitutes may result in fire, electric shock, or other hazards.
(4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is
in proper working condition.
Damage requiring service:
PRODUCT SERVICE
Always follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air to circulate around
the unit
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install the unit:
SAFETY PRECAUTIONS
812 Kings Highway | Saugerties, NY 12477 | 845-246-7500 | www.oceanmatrix.com
100% Employee Owned Division of Tower Products Incorporated
WARRANTY
1 Year