Ocean Matrix OMX-01HMHM0006 User manual

OMX-01HMHM0006
Ocean Matrix OMX-01HMHM0006 HDMI
1x2 Extender Splitter Set with HDMI
Loop Out - POC - IR Function

Supports High Resolutions up to 4K@60Hz YUV 4:4:4
Supports Full 3D Format
HDCP 2.2 & HDCP 1.4
Data Transfer Rate p to 6.0Gbps Per Channel (18Gbps All Channels)
TMDS Clock up to 600MHz
Supports 12bit Per Channel (36bit all Channels) Deep Color
Supports Uncompressed Audio Such as DTS, Dolby Digital (Including DTS-HD Master Audio
and Dolby TrueHD)
Supports 2-Way 12V POC (Power over Cable) from Tx to Rx or Rx to Tx
The Ocean Matrix OMX-01HMHM0006 HDMI is a 1x2 HDMI extender splitter set that combines
splitting and extension functionality, allowing for local displaying and remote viewing. The HDMI
signal is distributed simultaneously to local and remote outputs, making this device ideal for digital
signage applications that require high-quality HDMI video up to 4K@60Hz 4:4:4. Additionally, the
OMX-01HMHM0006 can extend IR signals from remote controls, allowing you to control video
sources directly from the display-end of your setup. For additional convenience, the unit supports
two-way POC (Power Over Cable) enabling either the transmitter or receiver to be powered by a
single 12V power supply.
Description:
Features:
Specifications:
Input Port: HDMI x 1 / RJ45 x 1 / 3.5MM x 1
Output Port: HDMI x 1 / Loop Out x 1 / RJ45 x 1 / 3.5MM x1
Transmission Distance: 4K@60Hz 4:4:4 up to 230 Feet (70m)
Vertical Frequency Range: 50/60Hz
IR Frequency Range: 20-60KHz
Interlaced Resolutions (50 & 60Hz): 480i, 576i, 1080i
Progressive Resolutions (50 & 60Hz): 480p, 576p, 720p, 1080p, 4K@60Hz
Operating Temperature: 32°F to 122°F
Storage Humidity: 5% to 90% RH Non-Condensation
Power Supply: DC 12V
Power Consumption (Max): TX: 1.3W / RX: 1.6W
Power Supply and Extender Certifications: FCC / CE / RoHS
Dimensions (LxWxH): 3.97 x 3.47 x 0.92”
Net Weight: 6.9oz (196g)
Item Includes:
1 x 12V Power Supply
4 x Mounting Ears
IR Sender Cable
IR Receiver Cable

Operation Controls and Functions:
Reset - click to reset sender.
CAT 6 - UTP Cable connection port.
Power - Power LED indicator.
DC 12V In - Power supply input.
HDMI Out - Connect to output devices via HDMI male output port for local loop out.
HDMI In - Connect to input sources via HDMI male input port.
IR Out - IR signal output port.
1.
2.
3.
4.
5.
6.
7.
Sender:
5 6 7 4
2
3
1

Operation Controls and Functions:
Reset - click to reset sender.
CAT 6 - UTP Cable connection port.
Power - Power LED indicator.
DC 12V In - Power supply input.
HDMI Out - Connect to output devices via HDMI male output port for local loop out.
IR In - IR signal input port.
1.
2.
3.
4.
5.
6.
23
4 5
Receiver:
1
6

Connection Diagram:
HDTV
HDMI Cable
HDMI Cable
Sender
Receiver
HDMI Cable
DVD Remote
Control
HDTV
IR RX
IR TX
DVD
CAT6
Cable

The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged
(b) Objects or liquids have gotten into the unit
(c) The unit has been exposed to rain
(d) The unit does not operate normally or exhibits a marked change in performance; The unit has been
dropped or the cabinet is damaged.
(2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
(3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer. Unauthorized substitutes may result in fire, electric shock, or other hazards.
(4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is
in proper working condition.
Damage requiring service:
PRODUCT SERVICE
Always follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air to circulate around
the unit
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install the unit:
SAFETY PRECAUTIONS
812 Kings Highway | Saugerties, NY 12477 | 845-246-7500 | www.oceanmatrix.com
100% Employee Owned Division of Tower Products Incorporated
WARRANTY
1 Year