Ocean Matrix OMX-02MXSI001 User manual

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
Specifications
Composite Video Input NTSC, PAL, SECAM
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Dimensions 11.34 x 4.30 x 1.3 in
Weight 1.65 lb
Includes 1– 12VDC/2.5A Power Adapter
Audio Formats PCM 2CH with 48KHz sample rate
Power Consumption 5W
Power Input AC100—240V 50/60Hz
Color Depth 10-bit, 12-bit
Specifications
SDI Output Distance
3G-SDI up to 328 feet
HD-SDI up to 656 feet
Supports Black Screen Signal Output
HDMI Cable Distance 33 feet, 8/12-bit
SDI Transmission Rates 2.97Gbps, 1,485 Gbps
Video Bandwidth 165 MHz
HDMI Input Timing Range 480i/576i ~ 1080P@50/60Hz
VGA Input Timing Range VGA@60~SXGA60 & 480i~1080p@60Hz
VGA/DVI Input Timings
VGA@60Hz, SVGA@60Hz
XGA@60Hz, SXGA@60Hz, WXGA@60Hz
1280x720@60Hz, 1920x1080@60Hz
INSTALLATION & SPECIFICATIONS
OMX-02MXSI001
Multiformat to SDI Converter with Scaler
Upscales Composite, VGA, DVI, and HDMI input signals to 3G-SDI
or HD-SDI formats and outputs two SDI signals simultaneously
Connect Supplied
Power Adapter
CPU with VGA
Blu-Ray or Other Source
Connect Output from Source Devices
CPU with DVI
Select Audio Format Select SDI Output
SDI Monitor Input
Source Displays
Set-Top Box or
other Composite
Video & Analog
Audio Source

SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust.
Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct
sunlight exposure or extreme changes of temperature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is provided. Any enclosure open-
ings must not be blocked or covered as they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not
use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through
openings as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
9. Do not attempt to open or service this unit yourself as opening or removing covers may expose you to
dangerous voltage and other hazards.
10.There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized
dealer, or an authorized repair service company.
Troubleshooting
No image output
 Ensure power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
 Check that the cables are securely connected.
 Check that the display/TV has been set to the proper channel or input.
 For PC connections via HDMI, set output mode to mirror or extend.
Display is unstable
 Check all connections.
 Connect the source directly to the display device to ensure there is a signal output.
Change the signal source if necessary.
 Use only high-quality HDMI or appropriate cables.
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com