odesea TX-65 User manual

TX-65 INSTALLATION INSTRUCTION
Bolt M6x30mm
x3
Nut M6
x3
Parts
Hex key
x1
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer Service.
Safety Caution
● Make sure the weight of the outboard motor does not exceed 60 kg.
● Make sure the outboard motor is fully secured before moving.
● Do not attach the trolley behind your car.
Wrench
x1

Attach the horizontal support beam to the base part
Attach the axle/tires to the base part
STEP 2
STEP 3
STEP 1
STEP 4
Attach the tire to
the axle
Attach the axle
to the base part
Use the hex key and wrench
to secure the two bolts and nuts
Press the bracket on
the vertical tube
Press the connection part
on the base part Place the bracket
with vertical tube
on the base part
Use the hex key and wrench
to secure the bolt and nut
Attach the handle to
the base part
Attach the handle