TA298 indoor and outdoor temperature hygrometer manual
Uses:This product is suitable for,factories,warehouses,
building air conditioning management,hospitals,aquaculture
species,room,office,hotel,laboratory....Modern energy
saving good helper.
The machine can be hung on the wall or on the table,on
the back there is a hook and bracket
Measuring range:outdoor -40C~70(-40~158F)
degree of error:0.1c(0.1c)
Indoor0C-50(32F~122"F)
Humidity 10%~99%土5%Resolution 1%
Function Test:Press MAX/MIN key once to display the
previous maximum/minimum indoor and outdoor
temperature and humidity values
When the MAX/MIN press the RESET button once to clear a
previously memorized maximum or minimum Remeasure
When the MAX/MIN 8 seconds after the display returns to
the current temperature and humidity display C/F key
Celsius and Fahrenheit Conversion
Time Debugging:
1 In the initial state,press and hold[MODE] for 2 seconds,
the number of minutes the current time starts flashing,press
the[ADJ] to adjust the hours,minutes.In normal time display
mode,press the[ADJ]can be converted to 12/24 show.
2 In the current clock mode(clock and minutes between
two blink once per second),press[MODE]once,switch the
display to alarm mode(clock and minutes between two points
is not flashing),press live[MODE]for 2 seconds,the alarm
time flashes,press the [ADJ]can adjust the alarm time,minute.
Alarm mode is displayed,press[ADJ] to set/cancel the alarm
alam function.After setting press the[MODE]returns to normal
time display.
This product uses 1.5v AAA batteries Extemal 1.5 m water
temperature sensors
*Fonts appear blurred,replace the battery.
