Office Star Products OSP Designs TRI2542G User manual

TRI2542G
COMPUTER DESK
OPERATING INSTRUCTIONS
LIMITED WarranTy
OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects
and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP
Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s
responsibility to prepay freight on any components returned to the factory. OSP Designs will pay return freight on components covered under
terms of warranty.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email parts@officestar.net, by Fax
1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. OSP Designs P.O. Box
3520 Ontario, California 91761 USA
WarnInG
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.

IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
PART QTY
1. Glass Top ...................1
2. Keyboard Tray ................1
3. Organizer Box ................1
4. Leg Frame (4L & 4R) ...........2
5. Top Rail .....................2
6. Bottom Rail ..................1
7. Cross Rod ...................1
8. Wood Dowel ................12
9. Bolt ........................4
10. Rubber Glass Support .........4
TRI2542G
COMPUTER DESK
ASSEMBLY INSTRUCTIONS
TRI2542G
COMPUTER DESK
ASSEMBLY INSTRUCTIONS
© Office Star Products March 2011
1
2
3
2
7
5
5
6
4L
4R
8
9
STEP 1
STEP 2
STEP 3 STEP 4
STEP 5
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert two Wooden Dowels (8) into each end of both Top Rails (5) and Bottom Rail (6). Attach both Top Rails (5) and Bottom Rail (6) to both
Leg Frame (4L & 4R) and secure by setting locks into position.
STEP 2 Attach Cross Rod (7) to rear of assembly using four Bolts (9). FULLY TIGHTEN ALL BOLTS (9).
STEP 3 Insert four Rubber Glass Supports (10) into top of desk assembly. Carefully slide Keyboard Tray (2) into built-in glides of assembly.
STEP 4 Attach Organizer Box (3) to Keyboard Tray (2).
STEP 5 Carefully place Glass Top (1) onto desk assembly.
ATTENTION: MAKE SURE ALL BOLTS (9) ARE FULLY TIGHTENED AND ‘LOCKS’ ARE IN THE LOCKED
POSITION BEFORE USING DESK.
10