Office Star Products Pro-Line II ProGrid 80885AL User manual

80885AL
ProGrid BACK MANAGER’S CHAIR
OPERATING INSTRUCTIONS
12WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• 2-TO-1 SELF ADJUSTING SYNCHRO TILT
WITH INFINITE LOCK
For individual comfort, this chair has been equipped with an
adjustment that allows back to tilt 2 degrees for every 1 degree
of seat tilt. To tilt or free float, pull lever (2) back, to lock into
any position push lever (2) forward.
• ARM FLIP UP AND DOWN
To flip arms up, simply pull up on arm. To lower arm, simply
pull down on arm.
LIMITED WARRANTY
Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
 •Lifetimeoncomponentpartsincludingpneumaticcylinder,controlmechanism,baseandcasters.
 •3Yearsonupholsteryfabricandfoamagainstwearanddeterioration.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
®

© Office Star Products December 2011
1
2
3
76
10
12
9L
9R
PA R T QTY
1. Base .......................1
2. Casters .....................5
3. Pneumatic Cylinder ............1
4. Height Adjustment Lever ........1
5. Synchro Tilt Lever .............1
6. Mechanism ..................1
7. Seat Cushion .................1
8. Backrest .....................1
9. Arms (9R & 9L) ...............2
10. Short Screws ............... .3
11. Medium Screws ..............4
12. Long Screws ................6
13. Back Support (pre-installed) ....1
14. Allen Wrench (not shown) ......1
11
STEP 2STEP 1 STEP 3
STEP 4 STEP 5
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 AttachHeighAdjustmentLever(4)andSynchroTiltLever(5)toMechanism(6).
STEP 2 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. InsertPneumaticCylinder(3)intoBase(1).
STEP 3 AttachArms(9L&9R)toSeatCushion(7)usingthreeLongScrews(12)foreachArm(9).TIGHTEN ALL SCREWS COMPLETELY USING ALLEN
WRENCH (14).AttachMechanism(6)toSeatCushion(7)withthearrowtowardsthefrontofthechairusingfourMediumScrews(11)
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (14).
STEP 4 AttachBackSupport(13)torearofMechanism(6)usingthreeShortScrews 10), TIGHTEN ALL SCREWS COMPLETELY
USING ALLEN WRENCH (14).
STEP 5 PlacetheassembledseatontopofPneumaticCylinder(3)andapplydownwardpressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
3
13
80885AL
ProGrid BACK MANAGER’S CHAIR
ASSEMBLY INSTRUCTIONS
®
8
6
4
5