Office Star Products TSX1121 User manual

TSX1121/TSX1122/TSX1123 TRADITIONAL SOFA
OPERATING INSTRUCTIONS
TSX1121
TSX1122
TSX1123
LIMITED WarranTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Ofce Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Ofce Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacic Time.
WarnInG
1. Use this product for the intended amount
of people only.
2. Do not use this chair unless all bolts screws are
securely tightened.
3. Check that all screws are tight every
three months or as needed.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use sofa as a stepladder.
7. Use this sofa for its intended purpose only.
8. Use mild detergent only for cleaning.

TSX1121/TSX1122/TSX1123 TRADITIONAL SOFA
ASSEMBLY INSTRUCTIONS
© Office Star Products December 2006
PART QTY
1. Sofa Body ................1
2. Rear Legs (2L & 2R) . . . . . . . . 2
3. Front Legs ................2
4. Screws ...................6
5. Long Screws . . . . . . . . . . . . . . 6
6. Washer ..................6
7. Allen Wrench (not shown) . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Place Sofa Body (1) face down on a soft surface, attach Front Legs (3) to Sofa Body (1) using three Screws (4) for each leg.
FULLY TIGHTEN SCREWS USING ALLEN WRENCH (7).
STEP 2 Peel back velcro flap from rear of Sofa Body (1), attach Rear Legs (2L & 2R) to sofa frame using three Long Screws (5) and three
Washers (6) for each leg, and reattach velcro flap. SEE DETAIL A.
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (7).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING SOFA.
STEP 1
DETAIL A
Sofa Frame
Sofa Frame
1
2
3
42L
2R
3
5
46
5
6
5
6