Office Star Products work smart OPH61601 User manual

OPH61601 / OPH61606 / OPH61607
EXECUTIVE ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
LIMITED WarranTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
WarnInG
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
1
3
4
2
FEaTUrES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and twist lever (1) up.
To lower seat height sit on chair and twist lever (1) up.
NOTE: It is normal for chair to slightly lower
under body weight.
• MID-PIVOT KNEE TILT ADJUSTMENT
To adjust tilt angle, pull lever (3) up for free float, and push
lever (3) down to lock into any postition.
• TILT TENSION ADJUSTMENT
To adjust tilt tension, turn knob (2) counter-clockwise to
increase tension, and turn knob (2) clockwise to decrease
or ease tension.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (4) in to allow the arms to
move up or down freely. Release the button (4) once the desired
height is reached.

© Office Star Products December 2013
2
1
PA R T QTY
1. Base .......................1
2. Casters .....................5
3. Pneumatic Cylinder ............1
4. Bellows .....................1
5. Mechanism ..................1
6. Seat Cushion .................1
7. Back Cushion ................1
8. Arms (8L & 8R) ...............2
9. Short Screws .................4
10. Long Screws ................8
11. Plastic Caps .................8
12. Allen Wrench (not shown) ......1
OPH61601 / OPH61606 / OPH61607
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
4
10
9
8L
8R
6
5
STEP 1 STEP 2 STEP 3
STEP 4
11
3
7
STEP 5
10
6
3
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder (3) into Base (1).
STEP 2 Attach Mechanism (5) to Seat Cushion (6) with the arrow towards the front of the chair using four Short Screws (9).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3 Attach Arms (8L & 8R) to Back Cushion (7) using two Long Screws (10) for each Arm (8R & 8L).
DO NOT FULLY TIGHTEN SCREWS.
STEP 4 Attach Arms (8L & 8R) to Seat Cushion (6) using two Long Screws (10) for each Arm (8R & 8L). FULLY TIGHTEN ALL SCREWS
USING ALLEN WRENCH (12). Cover holes in Arms (8L & 8R) using four Plastic Caps (11) for each Arm (8).
STEP 5 Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
11
8R
8L