Office Star AVE SIX MALTA MAL26 User manual

THANK YOU FOR PURCHASING OUR AVE • SIX
P.O. Box 3520, Ontario, CA 91761
Customer Service: 1-800-950-7262
www.avesix.com
LIMITED WARRANTY
Office Star Products warrants to the original purchaser that this product will be free from defects
in material and workmanship as described below. Office Star Products will repair or replace, at its
option, without charge to the original purchaser only, defective products or parts for one (1) year
from the date of purchase. Replacement parts can only be supplied if parts are available. Items
out of production may be unavailable. This warranty shall be effective for the applicable time
period beginning from the date of purchase as shown on your original sales receipt. This warranty
is your sole remedy for product defects and excludes defects due to or arising in connection with
product abuse or misuse, use modification of, or attachments to the product, and products or parts
not used, maintained, or installed in accordance with the company’s installation, maintenance
and/or applicable guidelines. There are no other warranties, express or implied, other than
those specifically described, including without limitation any implied warranty of merchantability
or of fitness for a particular purpose. Office Star Products will not be responsible for incidental
or consequential damages. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may also have other rights which may vary from
state to state. Our quality standards are among the highest in the industry. Sometimes, no matter
how hard we try, there are times when parts are damaged or missing. Our Parts Department will
do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net,
by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00
a.m. - 5:00 p.m. Pacific Time.
MALTA
Office Chair
MAL26

Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.avesix.com, email or write us.
5 (Caster) - 5 Pieces 6 (Arm) - 2 Pieces
7 (Seat Plate) - 1 Piece
3 (Base) - 1 Piece 4 (Cylinder) - 1 Piece
1 (Seat) - 1 Piece 2 (Back) - 1 Piece

HARDWARE LIST
SHORT BOLT
LONG BOLT
ALLEN WRENCH
4 PCS
8 PCS
1 PC
A
B
C
Step 1 Step 2
5
3
4
1
A
7

Step 3
Step 5
Step 4
1
1
B
6
6
4
B
2
6
6

FEATURES
2
1
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.
To lower seat height sit on chair and pull lever (1) up.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock return
chair to the upright position and push lever (1) in. To unlock pull
lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely.

Ofce Star Products: Instructions Printing Rules
The following must be followed:
1. No changes should be made to these documents. If changes are needed they must be made through
Office Star Products.
2. All items will be printed at the size intended by Office Star Products. Finish trim size is 81/2” X 11”
3. All Items will be printed on a printing press unless other arrangements are made before printing.
4. Paper should be white, at least 80# gloss text and coated both sides.
5. Failure to follow these rules could result in back charges from Office Star Products.
(This is a non printing page)