OFM Rize Pg6348 User manual

PATENTE EN TRAMITE
PATENT PENDING
AT
ASSEMBLY TIME
8 min
EASY ASSEMBLY
WITHOUT TOOLS
POLYCARBONATE FLOOR PANEL
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
161 Tadition Trail
Holly Springs, NC 27540
Phone: [phone]
Fax: [phone]
Web Site: www.ofm furniture.com
MOD. Pg6348 MOD. Pg6325
B
B
BB
B
CC
CC
C
CONT.CONT. CONT.CONT.
CONT.CONT. CONT.CONT.
MOD. Pg6337
C
CONT.CONT.
CONT.CONT.
B
MOD. Pg4748 MOD. Pg4725
MOD. Pg4737
AAAA
AAAA
BBBB
BBBB
CCCC
CCCC
DDDD
DDDD
PANEL 63in x 48in......................1 PCS.
GOATEE 5/16 X 3...................... 2 PCS.
WING NUT 5/16........................ 2 PCS.
CORK 5/8..................................2 PCS.
PANEL 63in x 25in.......................1 PCS.
GOATEE 5/16 X 3...................... 2 PCS.
WING NUT DE 5/16.................... 2 PCS.
CORK 5/8..................................2 PCS.
PANEL 47in x 48in.....................1 PCS.
GOATEE 5/16 X 3...................... 2 PCS.
WING NUT DE 5/16.................... 2 PCS.
CORK 5/8..................................2 PCS.
PANEL 47in x 25in......................1 PCS.
GOATEE 5/16 X 3...................... 2 PCS.
WING NUT DE 5/16.................... 2 PCS.
CORK 5/8..................................2 PCS.
AA
AA
BB
BB
CC
CC
DD
DD
PANEL 63in x 37in......................1 PCS.
GOATEE 5/16 X 3..................... 2 PCS.
WING NUT 5/16........................ 2 PCS.
CORK 5/8..................................2 PCS
PANEL 47in x 37in.......................1 PCS.
GOATE 5/16 X 3........................ 2 PCS.
WING NUT DE 5/16.................... 2 PCS.
CORK 5/8..................................2 PCS.
AA
AA
A
A
D
D
D
DDD
CONFIGURATION B
D
Y
B
lift panel enough to assemble
panel hade to frame hook
The accessory of panel are inside them
Remove panels, itself between
two people to facilitate the join.
Upper view
If floor panel has a gap between panel
and frame as show in the upper view;
just adjust hooks as show in figure
Frame
Panel
X
Close side of hook with
your fingers to adjust panel.
X
Frame

PULL
(G)(G)
11AA
BB
22
33CC
D
CONFIGURATION A
POST 47POST 47
CONFIGURATION A
FLOOR PANEL MOD Pg4748FLOOR PANEL MOD Pg4748
UPPER VIEW
PS 63PS 63
CONFIGURATION B
FLOOR PANEL MOD Pg4748 FLOOR PANEL MOD Pg4748
UPPER VIEW
FLOOR PANEL MOD Pg4748 FLOOR PANEL MOD Pg4748
FLOOR PANEL MOD Pg4748 FLOOR PANEL MOD Pg4748
FLOOR PANEL MOD Pg4748 FLOOR PANEL MOD Pg4748
MOD. Pg6348 MOD. Pg4748
MOD. POST 47
B
D
To hide cables, remove
the complete panels
Remove panels, itself between
two people to facilitate the join.

Rize Panel System
161 Tradition Trail,Holly Springs, NC, 27540
800-520-7471 (voice) 919-362-4765 (fax)
919-303-6389 (voice) www.ofminc.com
[email protected]
Align frame with corner
connector and screw in
knobs on each side.
2For panel to panel connections;
align frames and use smaller
knob, then tighten with
buttery bolt.
3
Install cables along frame
base through openings.
Pop o grommet and
insert cables.
4Place panel cover hooks into
frame hooks. Once wires are
adjusted for length, pop on
grommet covers.
5
Attach corner connector to
frame with screw-in knobs.
Set up frames with corner
connector.
1