oGrow Raised Wicker Garden OGGB-39WC User manual

OGrow®
Raised Wicker Garden
Bed – 39” Square
OGGB-39WC & OGGB-39OPModels:
Assembly guide

Garden Bed Components
Assembly Guide
Canopy/Cover Assembly (for model OGGB-39WC)
1
2-3
4

GARDEN BED COMPONENTS
1
WALL PANELS
TOP CORNER BRACKETS
JOINT BASE CONNECTERS
BASE GROUND ANCHORS
ROPE
PLANT LABELS
ITEM
4
4
4
4
1
10
QT Y.

A B
A B
ASSEMBLY GUIDE
Connect garden walls with
corner columns to base feet.
Ensure the holes are located at
the top of the wall.
1
Connect the corner brackets
on all 4 corners.
2
Anchor the garden to the ground
on the bottom of all 4 corners.
3
2
A B

ASSEMBLY GUIDE (Continued)
Thread rope through the hole,
and out of the slot at the top of
the wall. Stretch the rope across
the length of the garden, through
the slot on the opposite wall.
Thread through the hole and continue
pattern for the remainder of the garden.
4
Once reaching the opposite
corner, thread diagonally on the
opposite wall and over the cut-out
at the top of the wall. Continue the
same pattern across the length of the
garden, threading the rope and stitching
over and under the existing pattern.
5
3

Fill the garden with soil.
Happy planting!
8
CANOPY/COVER ASSEMBLY
(FOR MODEL OGGB-39WC)
Top center connecter
Fiberglass rods
clear pvc canopy cover
ITEM
1
4
1
QT Y.
Place the berglass rods into
the holes at each corner,
and connect them on top
with the center connector,
creating an arch from the
corners to the center.
6
Cover the garden with plastic UV
and weather resistant cover
(zipper should be closed to ensure
neat t), tie down the sides of the
cover to the berglass rods.
7
4