Okamura Traverse satellite User manual

Instructions for Use
Conference table
INTERNATIONALSALES&MARKETINGDIVISION
2-14-27,Akasaka,Minato-ku,Tokyo107-0052,JAPAN
Tel:[phone]Fax:[phone]
http:
//
www . okamura.jp
/
OKAMURACORPORATION
GD3129
2019-08
Materials and Surface Finish
Part Materials Surface Finish
Leg/Frame Painted Aluminum Powder coated
Anodized Aluminum Clear anodized
Corner joint (with-frame table) Steel E-coated
Corner joint (frameless table) Aluminum Powder coated
Leveler base Aluminum Powder coated
Leveler Steel/zinc/polyurethane ー
Tabletop
Laminate
Surface High pressure laminate ー
Core MDF ー
Edge Plastic edgebanding ー
Backing High pressure laminate ー
Wood
veneer
Surface Wood veneer Urethane coated
Core MDF ー
Edge Wood edgebanding Urethane coated
Backing Wood veneer Urethane coated
Glass
Surface Tempered glass (back-
painted) ー
Substrate
Surface/
backing High pressure laminate ー
Core MDF ー
Edge Plastic edgebanding ー
Solid
surface
Surface Corian® ー
Substrate MDF Urethane coated
∗Please understand that product specifications might change without prior notification due to improvements made
to the product.

21
Caution
Appropriate Ventilation Measures
●Chemical substances may be released by the product when it is first purchased. Sufficiently ventilate
the room after installing the product.
●Do not completely close windows when using the product in rooms with conspicuously high
temperatures/humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F) and
relative humidity in excess of 50%).
As natural wood is a natural material, each color and grain pattern is unique. The protective surface
coating increases the durability of the product, giving a soft and subdued color and texture of the
natural wood. Depending on the wood, the color varies due to its natural characteristics. The wood color
grows rich and elegant over time. Some products may have a noticeable wood smell. High humidity
may lead to mold growth. Ventilation on a regular basis is recommended. Ensuring you understand
these characteristics, please read these Instructions for Use carefully before installation and use.
∗Natural wood includes solid wood, wooden veneer, artificial veneer, plywood, molded ply wood, laminated
wood, and MDF.
Please follow instructions below. Failure to do so
may cause serious damage to the product.
Okamura is not responsible for any damages
caused by modification of the product.
Indoor use only.
●Do not use outdoors or in wet places.
Exposure to moisture may cause the product
to malfunction due to distortion or mold.
Avoid direct sunlight.
●When placing alongside windows, use curtain
or blind to avoid from direct sunlight.
Avoid high temperature, high humidity, or
extreme aridity.
Do not place product under heater or air-
conditioner exhausting high temperature air.
Place the product on an even floor.
●Failure to do so may cause deformation of the
unit or damage to the moving parts.
Safety Instructions (Make sure to follow these instructions)
User must follow this instruction to prevent accidents and injuries, or damages to
their property.
Caution
Installation
Characteristics of Natural Wood
Part names
■Round Shape
Leg
Tabletop
■Square Shape
Tabletop
Leg
Tabletop
Leg
■Rectangle Shape
Tabletop
Leg
Do not handle roughly, or use improperly.
Failure to follow the safety precautions may
cause injury or damage to the product.
●Do not use the product as a stepstool.
●Do not stand, jump, lean, or unstably sit on
the product.
●Be sure to gently place any objects on the
tabletop.
When moving or storing the product due to
changing the floor layout or other purposes,
observe the following.
●Do not move the product with any objects
placed on the tabletop.
Be sure to remove cables (power/AV) which
are connected to the floor/wall.
●When adjusting the height of the tabletop, be
sure to support the product firmly with more
than two people to prevent your hands or feet
from being caught.
Uneven loading on the product may cause
balance loss and thus drop or fall.
Do not disassemble or repair on your own.
●Do not attempt to disassemble or repair the
product yourself. Please contact our official
dealers when needed.
●Do not use with bolts and screws loosen.
Failure may cause damage to the product
and result in injury.
Be careful of the following items since they
may cause injury or damage the product.
●Do not keep using the product if you are
aware of any unusualness in the product.
Failure may cause damage to the product
and result in injury.
●If found unstable due to loosening of bolts or
screws, retighten them.
●Do not use the product if any parts are
separated from it.
Do not to put your fingers or hands into the
spaces or moving parts of the product. This
may lead to injuries.
●Never put your fingers or hands near or into
any moving parts or gaps on the rear of the
top panel. Your fingers may get caught in the
gaps or moving parts.
Do not modify the product after purchase.
This may lead to malfunction or accidents.
●Modifying the product by yourself may
cause the product to malfunction or may
cause accidents or injuries. Okamura is not
responsible for any damages caused by
modification.
●Please contact an official okamura dealer in
advance when needed.

43
Operation Guide
■Tabletop Height Adjustment (Top up/top down)
The tabletop height can be adjusted by turning the leveler under the legs in the range of 0 to
10 mm (0.39"). When placing the product, be sure to level the tabletop by the leveler.
Higher
Lower
Leveler
Be sure to perform height adjustment
with more than two people using extreme
caution so as to prevent your hands and
fingers from getting caught.
Caution
■Wire management tray
Loose cables can be stored in the wire management tray under the tabletop.
■Wiring in the legs
Run the cables inside the beams and legs to keep the appearance neat.
Access aperture at the bottom and side
of the leg for cable connections allows
underfloor cabling and wiring.
Operation Guide
■Leg wiring cover and wiring cap
- Remove the leg wiring cover gently from a leg where you would like to run cables.
- Slide off the wiring cap from the leg wiring cover when you need more room to run cables.
- Store the wiring cap for future use.
* One of the four covers has a cutout as standard.
●Small leg
Hold the edge on both ends of
the leg wiring cover and gently
pull straight to remove it.
Applying force may damage
the plastic clips.
Caution
Slide off
Leg wiring cover
Wiring cap
Leg wiring cover with cutout
●Large leg
Slide off
Leg wiring cover
Wiring cap
Leg wiring cover with cutout

65
Please follow instructions below. Failure to do so may cause serious damage to the product.
Okamura is not responsible for any damages caused by modification of the product.
Operating precautions and maintenance
For daily care
Instructions to extend the life of product
Wooden part
●Wipe gently along the grain with a soft, clean,
dry cloth.
●If the product becomes noticeably dirty,
remove the dirt using a soft cloth dampened
with water, then use a dry cloth to absorb
water residue.
●For a more thorough cleaning we recommend
using a mild cleaner (thin neutral detergent).
〈Caution〉
●Do not use the following as they may damage
the coating.
◎ Thinner, benzene, alcohol , lacquer, oil,
vinegar, boiling water, polisher, etc.
●Frequent wiping with a damp cloth may cause
cracking of the coating. It is recommended
to use a dry soft cloth or our wiping cloths for
daily care.
Aluminum part
●Wipe off with a dry soft clean cloth.
●If moisture is collected or substances such
as fingerprints or sebum are adhered,
wipe it off immediately. Leaving moisture,
liquid, fingerprints, or sebum on the surface
accelerates oxidation of the aluminum part
and deteriorates gloss and texture.
Steel part and other tabletop materials
●Wipe off with a dry soft clean cloth.
●When the product gets dirty, moisten a soft
cloth with thin neutral detergent and wipe off
immediately. Wipe clean with a damp cloth.
Be sure to wipe detergent completely and
wipe again with a dry cloth to dry it.
〈Caution〉
●Do not leave the product with moisture
remaining on it. Do not clean the product with
organic solvents such as thinner or benzene,
or with a cloth that contains chemicals. Be
aware that once discoloration or deterioration
happens, it cannot be reverted.
●If the product is found unstable due to loose
bolts and screws, tighten them.
●Do not use in places exposed to vapors. This
could cause rusting.
●Do not use sharp objects such as a knife on
the tabletop as it may cause scratches or
damages to the surface.
●If the product gets wet with water, wipe off
with dry and soft cloth.
●If you spill tea, coffee, detergent, medicine,
or some other liquid on the product, wipe off
immediately.
●Do not place a glass, a vase or a metallic
object directly on the coating as this may
cause scratches to the surface.
In particular, note that porcelain and pottery
have a rough surface on their bottoms.
●This instruction manual is very important, so
store it in an easily accessible location.
●Regular maintenance is recommended for long
product life. Make requests to us immediately
when a repair or inspection is needed (fees
required after expiration of warranty).
Operation Guide
■Power accessories – In-surface power unit
●Tech Port (Trimless Matched Lid)
Power outlet
Matched lid
Telecom plate cutout
USB charger
RJ45 data cutout
Cord through hole
When using a retractable
cable, make sure the
cable is pulled straight.
●Rectangle Aluminum Lid
Aluminum trim
USB charger Power outlet
Aluminum lid
●Round Flip Lid
Plastic trim
Open Closed
Plastic lid
USB charger Power outlet
■Power accessories – Under-mount power unit
●Tech Cradle ●Wireless charger
Power outlet
Extron AAP plate
Mount bracket
Mount plate
Wireless charging
device
Decal