
unc
on
6. 3.5mm MIC. Input jack
Using condenser MIC., when AUX with inpout,3.5mm MIC off.
3.Power switch & MIC. Volume
(1)Turn clockwise for Turn-ON and MIC.
Volume control , Min MAX.
(2)Turn anti-clockwise for Turn-off and MIC.
Volume control , MAX Min .
5.Built-In MIC
(1)When MIC or AUX with input, built-in microphone off.
(2)When MIC and AUX without input, built-in microphone on.
1.Channel Selection
(1) with16 ch. Selectable.
2.Tx LED Indicator
(1)When turn on,LED light up GREEN indicates
transmission normally.
(2)After using a period of time,LED light RED indicated
low battery, and still with transmission could stay
for about 30 minutes.
4.PL LED Indicator
(1)When indicate Red light and stop working, battery
need to recharging or change New batteries.
7. 3.5mm Aux Input jack
For connecting MP3 , CD play audio source , and send
audio source to receiver.
8.DC Input & Recharging jack
Could connect +5V switching adapter to provide power
or slow recharging internal rechargeable batteries.
PLTX
OFFCH.
MIC.
1 2
16
-2- -3-
12.Battery cover
11.Rechaging bottom jack
Could connecting to charger HDC-808 for fast
charging internal batteries.
please
use 2 pcs AA size Ni-MH. rechargeable
battery .
10.Battery box
(1)This system also could use AA type dry
cell battery , but please do not put them
on charging stand for recharging.
(2)When recharging the transmitter ,
.Belt clip
3.Applicable Occasion : Tour Guide , Museum and Factory visit, Oral
multi-languages translating system , Journalist V8 voice recording ,
audio-visual language teaching , assist wireless amplification system etc,
1.WT-808T transmitter, with built-in microphone, and also could work
for with lapel microphone or headset microphone.
Features:
2.WT-808T could use DC +5V switching adapter to provide power or
recharging the internal battery, and could use charger (HDC-808)
for recharging internal battery.