Oki SZX23-1480 NTSC User manual
_____________________________________________________________________
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
ANDDONOTREMOVECOVERORBACK.
CAUTION:
1.CONNECT 12V DC UL LISTED POWER SUPPLY.
2. INSTALL CAMERA UNDER UNSTABLE LIGHT SOURCE MAY CAUSE
ABNORMAL FUNCTION.
3. ONLY USE CAMERA UNDER CONDITIONS WHERE TEMPERATURES
ARE BETWEEN -10°C to 50°C.
FILES INSTALLATION MARKING:
INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON
AND SHOULD CONFORM TO ALL LOCAL CODES
OPERATING MANUAL
Before attempting to connect or operate this product,
please read these instructions completely
ON-SCREEN-DISPLAY
Optical Low Pass Filter (OLPF) Switching Mechanism
CCD ZOOM CAMERA
SZX23-1480 NTSC
SZX23-1480P PAL
12V DC
______________________________________________________________________
- 1 - www.OKIUSA.com
1. General………………………… ……………………… ………
This camera features a new Ultra Super high sensitive Near Infra-red CCD sensor and the
combination of special optical and digital electronic processing circuit, deliver a high
resolution, sharp, crisp image at daytime, and a clear monochrome picture under low light
or minimal IR projection. This superior and high sensitive series ensure to meet any strike
24 hour’s surveillance monitoring demand. This color CCD video camera employs a 1/4 inch
charge coupled device solid-state imaging device with 470/410 k (hi- res.) picture elements,
a 23x optical zoom lens, a 10x digital zoom, and external sync function. This unit is
equipped with a newly developed DSP (Digital Signal Processor) for video signal process.
A micro-controller is also introduced to provide excellent color reproduction, sharp, stable
picture and most of the function’s control; the special for this camera is it has more than 4
times sensitivity on NIR range and 2 times on visible light range compare to conventional
camera.
2. Features…………………………… ……………………………….
1. Easy recognize the objects under extreme low light.
2. Accept minimal IR illumination for completely dark surveillance for excellent picture
quality.
3. Daytime color and auto switchover to black-white picture at night (IR filter removable).
4. 480 lines of horizontal resolution and high quality picture by utilizing digital processing
LSI’s
5. 230x zoom (23x optical & 10x digital zoom).
6. Minimum illumination of 0.5Lux (F1.2, Target) and signal-to-noise ratio of 50 dB is
realized by employing an extra high sensitivity image sensor with micro lenses and low
noise circuit design.
7. High quality picture –A digital signal processor (DSP) performs digital horizontal and
vertical aperture enhancement to produce high-resolution picture.
8. A newly developed intelligent wide range Auto Tracing White Balance (ATW) that
automatically adjusts the white balance according to the color temperature of the light
source illuminating the subject.
9. Smart digital control Auto BLC.
10. Advanced Auto Exposure System for both fix iris and auto iris lenses control the
amount of light to ensure it is always optimized.
11. Internal or Line-lock external sync.
12. Long life and high reliability.
______________________________________________________________________
- 2 - www.OKIUSA.com
DC 12V
3. Major Control And Their Function-- -----------------------
A. Holder screw hole
The mounting hole is a standard photographic pan-head screw size
(1/4” – 20)
B. DC12V Block Terminal
This terminal accepts DC12V Please add + & - to power
terminals drawing
C. Zoom adjustment ( WIDE / TELE )
D. Focus adjustment ( FAR / NEAR )
E. Protocol select DIP Switch
F. Video output terminal (BNC)
This connector is used to connect with the VIDEO IN connector of monitor.
G. Power LED
H. Screwless type terminal 12 pin (Remote).
I. On-Screen Display keypad (UP / DOWN / ENTER / ESC)
J. Filter holder (M30.5 x 0.5mm)
230X
COLOR CCD CAMERA
DIGITAL ZOOM
109.5
123.5
36.4
PL
5
4
3
2
1
PROTOCOL
VIDEO OUT
NEAR
FAR
TELE
WIDE
01
I
03 1211100908070605040201
FZRS485 D0 DI
DC12V
+
-
70
63.6
A
C
D
E
F
G
I
H
B
J
______________________________________________________________________
- 3 - www.OKIUSA.com
4. User OSD Setting Menu And Functions----- ---------------
[UP] ：UP & RIGHT MOVE KEY
[DOWN] ：DOWN & LEFT MOVE KEY
[ENTER] ：ENTER KEY
[ESC] ：ESC KEY
Push [ENTER] key 3 sec. to get into the OSD menu.
Push [ESC] key to leave menu.
If pushed [ESC] key, all set parameter data will be saved and return back to the previous
menu page, this will occur while setting the parameter and without push [ENTER] key.
Page1MAINMENU Page2MAINMENU
Page3MAINMENU Page4 MAIN MENU
Page 5 MAIN MENU
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT AUTO.
AES FIX.
BLC OFF
AGC +4
SETUP MENU [2/5]
WHITEBAL ATW.
SYNC OFF
ZOOM
DIGITALZOOM OFF
FOCUS
AUTOFOCUS OFF
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN +6
V-GAIN +6
MOTION OFF
IR ON.
INITIAL ON
SETUP MENU [4/5]
DEFAULT CANCEL
FREEZE OFF
FREEZE MODE FIELD
ZOOM SPEED +3
FOCUS SPEED MIN
GAMMA GAMMA1
SETUPMENU [5/5]
ZOOM+AF OFF
AFSLEEP OFF
SCALE OFF
LANGUAGE ENGLISH
WINKER OFF
MISC
______________________________________________________________________
- 4 - www.OKIUSA.com
4.1 Camera Identification Setting (CAMERA ID)
Move cursor to CAMERA ID, press ENTER key to enter
ID FUNCTION SELECTING menu, then Press UP or
DOWN key to select ON.
Press ENTER key to enter CAMERA ID EDIT menu.
Page1 MAIN MENU
Press ENTER key to edit ID character, and then press UP
or DOWN key to select ID character position (total twenty
character positions).
Press ENTER key to enter ID characters menu.
CAMERA ID EDIT MENU Select the desired character by using UP and DOWN
button, and Press ENTER key to confirm the blinking
character .The first character is saved and the cursor in
the button of the screen moves to next (Maximum 20
characters).
ID CHARACTER MENU
Move cursor to POSITION, press ENTER key to enter ID
POSITION SELECTING menu, then Press UP or DOWN
key to select ID POSTION L-U, R-D, L-D or R-U.
CAMERA ID EDIT MENU
SETUP MENU [1/5]
CAMERAID →ON.
SENSEUP x4
AISHUT AUTO.
AES FIX.
BLC OFF
AGC +4
CAMERA ID
EDIT
POSITION L-U
↓
- - - - - - - - - - - - - - - - - - - -
CAMERA ID
EDIT
POSITION L-U
↓
- - - - - - - - - - - - - - - - - - - -
CAMERA ID
EDIT
→POSITION L-U
- - - - - - - - - - - - - - - - - - - -
______________________________________________________________________
- 5 - www.OKIUSA.com
4.2 SENSE UP Move cursor to SENSE UP, press ENTER key to enter
SENSE UP FUNCTION SELECTING menu, then Press UP
or DOWN key to select OFF, x2, x4, x6, x8, x12, x16, x32
or x64 (0 Frame, 2 Frames, 4 Frames, 6 Frames, 8
Frames, 12 Frames, 16 Frames, 32 Frames, 64 Frames, 9
steps adjustable).
Page1MAINMENU
4.3 AISHUT (Auto Iris)
4.3.1 AISHUT AUTO MODE
Move cursor to AISHUT, press ENTER key to enter
AISHUT FUNCTION SELECTING menu, then Press UP
or DOWN key to select AUTO.
Press ENTER key to enter AUTO LEVEL ADJUSTMENT
menu.
Page1 MAIN MENU
Press ENTER key to enter AUTO LEVEL SELECTING
menu, then Press UP or DOWN key to select MIN, +1,
+2, +3, +4, +5, +6, +7, MAX.
AUTO LEVEL ADJUSTMENT MENU
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT →AUTO.
AES FIX.
BLC OFF
AGC +4
AISHUT
AUTO LEVEL →+4
SETUP MENU [1/5]
CAMERAID ON
SENSE UP →x4
AISHUT AUTO.
AES FIX.
BLC OFF
AGC +4
______________________________________________________________________
- 6 - www.OKIUSA.com
4.3.2AISHUT FIX MODE Move cursor to AISHUT, press ENTER key to enter
AISHUT FUNCTION SELECTING menu, then Press UP or
DOWN key to select FIX.
Press ENTER key to enter FIX LEVEL ADJUSTMENT
menu.
Page1MAINMENU Press ENTER key to enter FIX LEVEL SELECTING menu,
then Press UP or DOWN key to select MIN, +1, +2, +3, +4,
+5, +6, +7, MAX.
FIX LEVEL ADJUSTMENT MENU
4.4 AES (Auto Exposure Mode)
4.4.1 AES FIX MODE Move cursor to AES, press ENTER key to enter AES
FUNCTION SELECTING menu, then Press UP or
DOWN key to select FIX.
Press ENTER key to enter FIX LEVEL ADJUSTMENT
menu.
Page1MAINMENU Press ENTER key to enter FIX LEVEL SELECTING
menu, then Press UP or DOWN key to select OFF,
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000.
FIX LEVEL ADJUSTMENT MENU
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT →FIX.
AES FIX.
BLC OFF
AGC +4
AISHUT
FIX LEVEL →+4
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT AUTO.
AES →FIX.
BLC OFF
AGC +4
AES
FIX LEVEL →OFF
______________________________________________________________________
- 7 - www.OKIUSA.com
4.4.2 AES AUTO MODE
Move cursor to AES, press ENTER key to enter AES
FUNCTION SELECTING menu, then Press UP or
DOWN key to select AUTO.
Press ENTER key to enter AUTO LEVEL
ADJUSTMENT menu.
Page1 MAIN MENU
Press ENTER key to enter AUTO LEVEL SELECTING
menu, then Press UP or DOWN key to select MIN, +1,
+2, +3, +4, +5, +6, +7, MAX.
AUTO LEVEL ADJUSTMENT MENU
4.5 BLC (Backlight Compensation)
Move cursor to BLC, press ENTER key to enter BLC
FUNCTION SELECTING menu, then Press UP or
DOWN key to select ON.
Press ENTER key to enter BLC AREAS AND LEVEL
ADJUSTMENT menu.
Page1MAINMENU
Press ENTER key to enter BLC AREA ADJUSTMENT
menu.
AREA AND LEVEL ADJUSTMENT MENU
AES
AUTO LEVEL →+4
SETUP MENU [1/5]
CAMERAID OFF
SENSE UP OFF
AISHUT AUTO.
AES →AUTO.
BLC OFF
AGC +4
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT AUTO.
AES AUTO.
BLC →ON.
AGC +4
BLC
→BLC AREA
BLC LEVEL MIN
______________________________________________________________________
- 8 - www.OKIUSA.com
Press ENTER key to set BLC AREA BLOCK. Press UP or DOWN key to select BLC AREA
BLOCK.
OPD WINDOW
This method is suited for cases where the main subject is fixed within the screen.
The important object in a scene is usually placed in the center of the monitor’s screen. In
this mode more photometric weight is given to the center of the screen than to the edge of
the picture, this function will eliminate the interference by strong background light, which
makes the camera picture dark. The size and location of center window can be adjusted
freely by user within 48 areas on screen.
Press ENTER key to enter BLC LEVEL ADJUSTMENT
menu, then Press UP or DOWN key to select MIN, +1,
+2, +3, +4, +5, +6, MAX.
4.6 AGC (Auto Gain Control)
Move cursor to AGC, press ENTER key to enter AGC
LEVEL SELECTING menu, then Press UP or DOWN
key to select BASE, +1, +2, +3, +4, +5, +6, +7, MAX
(0dB ~ 36dB, 9 steps adjustable).
AGC ADJUSTMENT MENU
BLC
BLC AREA
BLC LEVEL →MIN
SETUP MENU [1/5]
CAMERAID ON
SENSEUP x4
AISHUT AUTO.
AES FIX.
BLC OFF
AGC →+4
______________________________________________________________________
- 9 - www.OKIUSA.com
4.7 WHITE BALANCE
4.7.1 ATW (Auto Trace White Balance)
Move cursor to WHITE BAL, press ENTER key to enter
WHITE BAL FUNCTION SELECTING menu, then Press
UP or DOWN key to select ATW.
Press ENTER key to enter ATW LEVEL ADJUSTMENT
menu.
Page2MAINMENU
Press ENTER key to enter ATW LEVEL ADJUSTMENT
menu, then Press UP or DOWN key to select RED,
RED+, RED++, RED+++, MIDDLE, BLUE, BLUE+,
BLUE++,BLUE+++, 9 steps adjustable.
ATW LEVEL ADJUSTMENT MENU
Move cursor to R-Y GAIN, press ENTER key to enter
R-Y GAIN ADJUSTMENT menu, then Press UP or
DOWN key to select MIN, +1, +2, +3, +4, +5, +6, +7,
MAX, 9 steps adjustable.
R-Y GAIN ADJUSTMENT MENU
Move cursor to B-Y GAIN, press ENTER key to enter
B-Y GAIN ADJUSTMENT menu, then Press UP or
DOWN key to select MIN, +1, +2, +3, +4, +5, +6, +7,
MAX, 9 steps adjustable.
R-Y GAIN ADJUSTMENT MENU.
SETUP MENU [2/5]
WHITEBAL →ATW.
SYNC OFF
ZOOM
DIGITALZOOM OFF
FOCUS
AUTOFOCUS OFF
ATW LEVEL
ATW LEVEL →MIDDLE
R-
Y
GAIN +4
B-Y GAIN +4
ATW LEVEL
ATW LEVEL MIDDLE
R-Y GAIN →+4
B-Y GAIN +4
ATW LEVEL
ATW LEVEL MIDDLE
R-
Y
GAIN +4
B-Y GAIN →+4
______________________________________________________________________
- 10 - www.OKIUSA.com
4.7.2 AWB (Auto White Balance)
Move cursor to WHITE BAL, press ENTER key to
enter WHITE BAL FUNCTION SELECTING menu, then
Press UP or DOWN key to select AWB.
Press ENTER key to enter AWB LEVEL ADJUSTMENT
menu.
Page2MAINMENU
Press ENTER key to enter AWB LEVEL ADJUSTMENT
menu, then Press UP or DOWN key to select RED,
RED+, RED++, RED+++, MIDDLE, BLUE, BLUE+,
BLUE++, BLUE+++, 9 steps adjustable.
AWB LEVEL ADJUSTMENT MENU
Move cursor to R-Y GAIN, press ENTER key to enter
R-Y GAIN ADJUSTMENT menu, then Press UP or
DOWN key to select MIN, +1, +2, +3, +4, +5, +6, +7,
MAX, 9 steps adjustable.
R-Y GAIN ADJUSTMENT MENU Move cursor to B-Y GAIN, press ENTER key to enter
B-Y GAIN ADJUSTMENT menu, then Press UP or
DOWN key to select MIN, +1, +2, +3, +4, +5, +6, +7,
MAX, 9 steps adjustable.
R-Y GAIN ADJUSTMENT MENU
SETUP MENU [2/5]
WHITEBAL →AWB.
SYNC OFF
ZOOM
DIGITALZOOM OFF
FOCUS
AUTOFOCUS OFF
AWB LEVEL
AWB LEVEL →MIDDLE
R-
Y
GAIN +4
B-Y GAIN +4
AWB LEVEL
AWB LEVEL MIDDLE
R-Y GAIN →+4
B-Y GAIN +4
AWB LEVEL
AWB LEVEL MIDDLE
R-
Y
GAIN +4
B-Y GAIN →+4
______________________________________________________________________
- 11 - www.OKIUSA.com
4.8 SYNC This function is used to adjust phase of external
sync.
When input external sync, we can press ENTER key
to set SYNC ON, then press UP or DOWN key to
adjust phase.
Page2MAINMENU
4.9 ZOOM Move cursor to ZOOM, press ENTER key to enter
ZOOM ADJUSTMENT menu.
Page2MAINMENU
Press UP or DOWN key to select ZOOM WIDE to TELE,
1 to 23 times adjustable.
ZOOMADJUSTMENTMENU
4.10 DIGITAL ZOOM Move cursor to DIGITAL ZOOM, press ENTER key to
enter DIGITAL ZOOM FUNCTION SELECTING menu.
Press UP or DOWN key to select DIGITAL ZOOM ON
or OFF (1 to 10 times adjustable).
Page 2 MAIN MENU
SETUP MENU [2/5]
WHITEBAL AWB.
SYNC →OFF
ZOOM
DIGITALZOOM OFF
FOCUS
AUTOFOCUS OFF
SETUP MENU [2/5]
WHITEBAL AWB.
SYNC OFF
→ZOOM
DIGITALZOOM OFF
FOCUS
AUTOFOCUS OFF
ZOOM
WIDE - - - - - - - - - - - TELE
SETUP MENU [2/5]
WHITEBAL AWB.
SYNC OFF
ZOOM
DIGITALZOOM →ON
FOCUS
AUTOFOCUS OFF
______________________________________________________________________
- 12 - www.OKIUSA.com
4.11 FOCUS Move cursor to FOCUS, press ENTER key to enter
FOCUS ADJUSTMENT menu.
Page2MAINMENU
Press UP or DOWN key to select FOCUS FAR to
NEAR.
FOCUS ADJUSTMENT MENU
4.12 AUTO FOCUS
Move cursor to AUTO FOCUS, press ENTER key to
enter AUTO FOCUS FUNCTION SELECTING menu.
Press UP or DOWN key to select AUTO FOCUS ON or
OFF.
Page2MAINMENU
4.13 POSITION
Move cursor to POSITION, press ENTER key to enter
POSITION FUNCTION SELECTING menu.
Press UP or DOWN key to select LOAD, SAVE,
ALARM, and OSD.
Page3 MAIN MENU
SETUP MENU [2/5]
WHITEBAL AWB.
SYNC OFF
ZOOM
DIGITALZOOM OFF
→FOCUS
AUTOFOCUS OFF
FOCUS
FAR - - - - - - - - - - - NEAR
SETUP MENU [2/5]
WHITEBAL AWB.
SYNC OFF
ZOOM
DIGITALZOOM OFF
FOCUS
AUTO FOCUS →ON
SETUP MENU [3/5]
POSITION →LOAD.
H-GAIN +6
V-GAIN +6
MOTION OFF
IR ON.
INITIAL ON
______________________________________________________________________
- 13 - www.OKIUSA.com
There have 64 steps (position with zoom & focus) can
be programmed.
After adjusting position with zoom & focus, Press
ENTER key to enter POSITION SAVE SELECTNG
menu.
Press UP or DOWN key to select position (1 to 64
position that you want to save), then press ENTER
key that will be saved.
POSITIONSAVEMENU
Press ENTER key to enter POSITION LOAD
SELECTNG menu. Press UP or DOWN key to select
position (1 to 64 position that you want to LOAD),
then press ENTER key that will be loaded.
POSITIONLOADMENU
Press ENTER key to enter ALARM POSITION
SELECTNG menu.
Press UP or DOWN key to select alarm position (OFF,
1 to 64 position that you want to set), then press
ENTER key that will be set.
When input alarm signal, alarm position will be
loaded.
ALARMPOSITIONMENU
Display position number.
OSD set ON, position number will be display on
right-up(R-U) or right-down(R-D) of the screen.
POSITIONOSDMENU
POSITION SAVE
POSITION SAVE →1
POSITIONLOAD
POSITIONLOAD →1
ALARM POSITION
ALARM POSITION →OFF
POSITIONOSD
OSD →OFF
POSITION R-U
______________________________________________________________________
- 14 - www.OKIUSA.com
4.14 H-GAIN
This is used to enhance the compensation of the picture quality.
H-GAIN: Horizontal Compensation
Move cursor to H-GAIN, press ENTER key to enter
H-GAIN ADJUSTMENT menu.
Press UP or DOWN key to select MIN, +1, +2, +3, +4,
+5, +6, +7, +8, +9, +11, MAX, 13 steps adjustable.
Page3MAINMENU
4.15 V-GAIN
This is used to enhance the compensation of the picture quality.
V-GAIN: Vertical Compensation
Move cursor to V-GAIN, press ENTER key to enter
V-GAIN ADJUSTMENT menu.
Press UP or DOWN key to select MIN, +1, +2, +3, +4,
+5, +6, +7, +8, +9, +11, MAX, 13 steps adjustable.
Page3MAINMENU
4.16 MOTION
MOTION DETECTION FUNCTION Move cursor to MOTION, press ENTER key to enter
MOTION ON/OFF menu.
Press UP or DOWN key to select ON.
Page3MAINMENU
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN →+6
V-GAIN +6
MOTION OFF
IR ON.
INITIAL ON
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN +6
V-GAIN →+6
MOTION OFF
IR ON.
INITIAL ON
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN +6
V-GAIN +6
MOTION →ON.
IR ON.
INITIAL ON
______________________________________________________________________
- 15 - www.OKIUSA.com
Press ENTER key to enter MOTION FUNCTION menu.
Press UP or DOWN key to select motion detection
AREA, LEVEL (Sensitivity), TIME, OSD.
When detecting motion, it will output alarm signal.
MOTIONMENU
4.17 IR
IR FILTER REMOVABLE FUNTION (DAY & NIGHT FUNCTION)
Move cursor to IR, press ENTER key to enter IR
ON/OFF menu.
Press UP or DOWN key to select ON.
Page3MAINMENU
Press ENTER key to enter IR SW FUNCTION menu.
Press UP or DOWN key to select IR SW detection INT.
IR SW can detect INT. (AGC and SENSE UP) signal.
IRSWINT.MENU
Press ENTER key to enter IR INT LEVEL
ADJUSTMENT menu.
Press UP or DOWN key to select IR INT LEVEL MIN,
+1, +2, +3, +4, +5, +6, +7, +8, +9, +11, +12, +13, +14,
+15, +16, MAX, 18 steps adjustable.
IR INT LEVEL MENU
MOTION
→AREA
LEVEL +4
TIME 30sec
OSD OFF
IR SW
IR SW →INT.
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN +6
V-GAIN +6
MOTION ON.
IR →ON.
INITIAL ON
IR INT LEVEL
IR INT LEVEL →MAX
______________________________________________________________________
- 16 - www.OKIUSA.com
IR INT LEVEL TABLE
NOTE1:
*1: AGC LEVEL
*2: IR INT LEVEL (ACT UP THE LEVEL)
*3:SENSEUP
NOTE2: IR INT LEVEL (MAX) Approach 15Lux (illumination)
IR INT LEVEL (MIN) Approach 0.02Lux (illumination)
Press ENTER key to enter IR SW FUNCTION menu.
Press UP or DOWN key to select IR SW detection EXT.
IR SW will be set manual mode.
IR SW EXT. MENU Press UP or DOWN key to select IR EXT LEVEL MAX
or MIN.
IR EXT LEVEL MAX: IR CUT OFF (B/W MODE)
IR EXT LEVEL MIN: IR CUT ON (COLOR MODE)
IR EXT LEVEL MENU
OFF x 2 x 4 x 6 x 8 x 12 x 16 x 32 x 64
BASE x x MAX 16 15 14 13 11 9
+1 x MAX 15 14 13 12 11 9 7
+2 x 16 14 13 12 11 10 8 6
+3 x 15 13 12 11 10 9 7 5
+4 MAX 14 12 11 10 9 8 6 4
+5 16 13 11 10 9 8 7 5 3
+6 15 12 10 9 8 7 6 4 2
+7 14 11 9 8 7 6 5 3 1
MAX 13 10 8 7 6 5 4 2 MIN
IR SW
IR SW →EXT.
IR EXT LEVEL
IR INT LEVEL →MAX
*3
*2
*1
______________________________________________________________________
- 17 - www.OKIUSA.com
4.18 INITIAL
FOCUS RESET FUNCTION Move cursor to INITIAL, press ENTER key to enter
INITIAL ON/OFF menu.
Press UP or DOWN key to select ON/OFF.
Page 3 MAIN MENU
4.19 DEFAULT
RESTART THE CAMERA AND RESET PARAMETERS TO FACTORY’S DEFAULT.
Move cursor to DEFAULT, press ENTER key to enter
DEFAULT CANCEL/OK menu.
Press UP or DOWN key to select OK, and then press
ENTER key.
Page 4 MAIN MENU
4.20 FREEZE
FREEZE PICTURE FUNCTION
Move cursor to FREEZE, press ENTER key to enter
FREEZE ON/OFF menu.
Press UP or DOWN key to select ON/OFF.
Page4MAINMENU
SETUP MENU [3/5]
POSITION LOAD.
H-GAIN +6
V-GAIN +6
MOTION ON.
IR ON.
INITIAL →ON
SETUP MENU [4/5]
DEFAULT →CANCEL
FREEZE OFF
FREEZE MODE FIELD
ZOOM SPEED +3
FOCUS SPEED MIN
GAMMA GAMMA1
SETUPMENU [4/5]
DEFAULT CANCEL
FREEZE →OFF
FREEZE MODE FIELD
ZOOM SPEED +3
FOCUS SPEED MIN
GAMMA GAMMA1
______________________________________________________________________
- 18 - www.OKIUSA.com
4.21 FREEZE MODE
FREEZE FIELD (or FRAME) OF PICTURE FUNCTION
Move cursor to FREEZE MODE, press ENTER key to
select FREEZE MODE menu.
Press UP or DOWN key to select FIELD/FRAME.
Page4MAINMENU
4.22 ZOOM SPEED
ZOOM SPEED ADJUSTMENT
Move cursor to ZOOM SPEED, press ENTER key to
enter ZOOM SPEED SELECTING menu, then Press
UP or DOWN key to select MAX, +3, +2, +1, MIN (5
steps adjustable).
Page4MAINMENU
4.23 FOCUS SPEED
FOCUS SPEED ADJUSTMENT
Move cursor to set FOCUS SPEED, press ENTER
key to FOCUS SPEED SELECTING menu, then
Press UP or DOWN key to select MIN, +1, +2, +3,
MAX (5 steps adjustable).
Page4MAINMENU
SETUPMENU [4/5]
DEFAULT CANCEL
FREEZE OFF
FREEZE MODE →FIELD
ZOOM SPEED +3
FOCUS SPEED MIN
GAMMA GAMMA1
SETUPMENU [4/5]
DEFAULT CANCEL
FREEZE OFF
FREEZE MODE FIELD
ZOOM SPEED →+3
FOCUS SPEED MIN
GAMMA GAMMA1
SETUPMENU [4/5]
DEFAULT CANCEL
FREEZE OFF
FREEZE MODE FIELD
ZOOM SPEED +3
FOCUS SPEED →MIN
GAMMA GAMMA1
______________________________________________________________________
- 19 - www.OKIUSA.com
4.24 GAMMA
GAMMA SELECTION
Move cursor to set GAMMA menu, press ENTER key
to select GAMMA mode , then Press UP or DOWN
key to select GAMMA1 or GAMMA2.
GAMMA1 = 0.45
GAMMA2 = 1.0
Page 4 MAIN MENU
4.25 ZOOM + AF
ZOOM TRIGGER AUTO FOCUS Move cursor to set ZOOM+AF mode, press ENTER
key into select ZOOM+AF menu.
Press UP or DOWN key to select ON/OFF.
Page 5 MAIN MENU
4.26 AF SLEEP
AUTO FOCUS SLEEP (WORK IN AUTO FOCUS ON MODE)
Move cursor to AF SLEEP, press ENTER key to enter
AF SLEEP ON/OFF menu.
Press UP or DOWN key to select ON/OFF.
The image change less than auto focus range in five
minutes; the auto focus will sleep in AF SLEEP ON
mode. Then the image change more ±6dB than auto
focus range, the auto focus will wake up.
Page 5 MAIN MENU
SETUPMENU [4/5]
DEFAULT CANCEL
FREEZE OFF
FREEZE MODE FIELD
ZOOM SPEED +3
FOCUS SPEED MIN
GAMMA →GAMMA1
SETUPMENU [5/5]
→ZOOM+AF OFF
AFSLEEP OFF
SCALE OFF
LANGUAGE ENGLISH
WINKER OFF
MISC
SETUPMENU [5/5]
ZOOM+AF OFF
→AFSLEEP OFF
SCALE OFF
LANGUAGE ENGLISH
WINKER OFF
MISC
Other manuals for SZX23-1480 NTSC
1
This manual suits for next models
1
Table of contents
Other Oki Security Camera manuals
