Olleh HPE-06GPOE-AT User manual

HPE-06GPOE-AT
User’s Guide
Per Model User’s Guide
Class A
(Broadcasting
Communication Apparatus
and Materials for Business)
This is an electromagnetic wave shielding apparatus registered
for business use as Class A, to which either its seller or user shall
pay an attention, and it is intended to be used anywhere but in
families.

PE-06GPOE-AT User’s Manual
2
1. Introduction of Product
PoE (Power-over-Ethernet) technology provides maximum 30W of electricity to PD
(Powered device), which observes IEEE 802.3at such as IP telephone or wireless LAN
access point, by realizing the power sourcing device (PSE, switch/router or mid span
system).
PE-06GPOE-AT has been designed to satisfy the management requirements of IEEE
802.3at signature, classification and electric power.
It is the Midspan & Single Pairs Application device used by being directly linked to the
existing L2, L3 switch and wireless AP. It can monitor the cost saving effect and overall
network power as the data and power are supplied to the existing Enterprise hardware and
PD (Powered Device) terminal by using the cable such as UTP CAT3, CAT5, CAT6 and etc.
under the standard Ethernet infra structure. Also., PoE device does not require any
separate electric power work in installing the wire AP, and it is possible to construct non-
stop system through UPS in case of the power trouble, and the convenience for installation
is increased due to reduction of the installation space, and it provides various merits such
as auto power interruption and etc. in case of the overload and cable disconnection.
. HPE-100 GP and Confirmation of Contents
Body User’s Manual
AC Cable

PE-06GPOE-AT User’s Manual
3
Cable Connection
1. To connect the cable to the power outlet after connecting the power cable to 220V AC input
terminal. The power LED of the front of PE-06GPOE-AT will turn on
2. To push and insert RJ-45 connector of UTP cable, which is linked from the upper switch (L2
switch), to UPLINK port of PE-06GPOE-AT until it makes the ratting sound.
3. To push and insert RJ-45 connector of UTP cable, which is linked to AP until it makes the
ratting sound. Link led will turn on when the power is normally supplied to PD.
4. You can confirm that PWD Led and Port Link, PoE Link Led (1-6) turn on if all are normally
installed.

PE-06GPOE-AT User’s Manual
4
3. System Composition


 Front side
Explanation
Title Color Operation Function
On Status that the system power is supplied
Power Green
Off Status that the system power is not supplied
On Status that the power is supplied to PD (Normal)
PD circuit linkage
(LINK) Green
Off Status that the power is not supplied to PD
Title Color


Backside
Explanation
Title Use Function
AC Line Power input AC per (110-220 AC) Linkage terminal
Earth line Earth line to protect the system from the surge

PE-06GPOE-AT User’s Manual
5
4. Specifications
Item Specifications
Standards IEEE802.3af
System structure Size (mm) System structure
Power (Input of AC Power)
Input power AC 110-22- AC
Power (DC output)
DC output DC54V / 30W (Total 180W)
Output terminal UTP 4,5(+), UTP7,8 (-)
Environmental conditions Temperature: -20 – 60’C, umidity: 10 – 90%
EMI/EMC Class A standards satisfied
Transmission
distance 100M Physical
characteristics Insulation
resistance Above 100Mohm

PE-06GPOE-AT User’s Manual
6
Product Guarantee
Product name Premium POE Device
Model name PE-06GPOE-AT
Certification number
Product number
Purchase day Date:
Guarantee period 2years
Name
Address
Tel number
Customer
E-mail
Standards for compensation of consumer’s damage
The compensation for the consumer’s damage will comply with the regulations for
compensation of consumer’s damage announced by Ministry of Finance and Economy.
Contents of guarantee
1. This product is the one produced through the strict quality control and inspection course.
2. You can receive A/S for 2 years after purchase if any abnormality occurs.
( owever, in case it is applicable to the charged service conditions even with the
guarantee period, the repair will be made by receiving the service charge.)
Charged Service
In case it is applicable to the following charged service conditions even within the guarantee
period, the service charge (Repair charge + parts fee + travel charge) will be requested.
1. In case the trouble occurs from the careless treatment of the customer
2. Natural disaster (Fire, salt damage, flood, thunder stroke, earthquake, standards
fixed as other natural disaster)
3. Trouble or damage from the fall and etc. during move after installation
4. Trouble occurred from remodeling of the product inside in the user’s option
5. In case any trouble occurs as any other person, but not A/S personnel of this
company, repairs the product,
6. In case any trouble occurs from the abnormality of the using power,

PE-06GPOE-AT User’s Manual
7
Enquiry relative to Use
If you have any inconvenience or enquiry during use, please visit the homepage of olleh
(http://www.olleh.com) enquire to the buying place or the adjacent center. (No. 100 without area
code)
appy Electronics Co., Ltd.,
463-760, #A-805, Bundang Technopark, 150, Yatap-dong, Bundang-gu, Seongnam-si,
Gyeonggi-do, Korea,
Customer Support: 82-70-8888-8764