Olympus MJU 300 Installation guide

DIGITAL CAMERA
APPAREIL PHOTO NUM
ÉRIQUE
DIGITALKAMERA
CÁMERA DIGITAL
BASIC MANUAL
MANUEL DE BASE
EINFACHE ANLEITUNG
MANUAL BÁSICO
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
basic_e_opx_6.fm Page 1 Thursday, December 12, 2002 10:44 AM

2En
En
CONTENTS/TABLE DES MATIÉRES/INHALT/CONTENIDO
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FRANÇAIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
This basic manual contains guidelines for using Olympus Stylus 300/400
DIGITAL (µ [mju:] 300/400 DIGITAL). Except where otherwise specified, the
explanations in the manual apply to both models.
CONTENTS
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
MENU FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SHOOTING BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SELECTING A RECORD MODE . . . . . . . . . . . . . . . . . . 31
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PRINT SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
DOWNLOADING PICTURES TO A COMPUTER . . . . . 38
ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
These instructions are only for quick reference. For more details
on the functions described here, refer to the “Reference Manual”
on CD-ROM.
basic_e_opx_6.fm Page 2 Thursday, December 12, 2002 10:44 AM

En 3
En
JBefore using your camera, read this manual carefully to ensure correct use.
JWe recommend that you take test shots to get accustomed to your camera before
taking important photographs.
JThese instructions are only a basic manual. For more details on the functions described
here, refer to the Reference Manual on the CD-ROM. For connection to the PC or
installation of provided software, refer to the Software Installation Guide included in the
CD-ROM package.
For customers in North and South America
For customers in Europe
Trademarks
• IBM is a registered trademark of International Business Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• Macintosh is a trademark of Apple Computer Inc.
• All other company and product names are registered trademarks and/or
trademarks of their respective owners.
• The standards for camera file systems referred to in this manual are the “Design
Rule for Camera File System/DCF” standards stipulated by the Japan Electronics
and Information Technology Industries Association (JEITA).
“CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection.
“CE” mark cameras are intended for sales in Europe.
For customers in USA
Declaration of Conformity
Model Number : Stylus 300 DIGITAL, Stylus 400 DIGITAL
RM-2 (Remote control)
Trade Name : OLYMPUS
Responsible Party : Olympus America Inc.
Address : 2 Corporate Center Drive, Melville, New York
11747-3157 U.S.A.
Telephone Number : 631-844-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
basic_e_opx_6.fm Page 3 Thursday, December 12, 2002 10:44 AM

4En
En
GETTING STARTED
JNAMES OF PARTS
Shutter button
Flash
USB connector
Connector cover DC-IN jack (4.8V)
Self-timer/
Remote control
lamp
Lens barrier
Turns the camera on
and off in the shooting
mode.
Lens
Extends automatically
when you open the lens
barrier.
VIDEO OUT
jack
Remote
control
receiver
Card cover DC-IN jack
cover
basic_e_opx_6.fm Page 4 Thursday, December 12, 2002 10:44 AM

En 5
En
Monitor
Battery compartment cover
OK/Menu button
()
Monitor button
(QUICK VIEW )
Flash mode button
Shooting mode button
Zoom button (W/T )
Macro button
Self-timer button
Arrow pad
Strap eyelet
Tripod socket
Viewfinder
AF target mark
Green lamp
Orange lamp
The arrow pad is used as arrow keys, as well as function buttons. The , ,
, and marks indicate which arrow key to press.
Playback button
()
basic_e_opx_6.fm Page 5 Thursday, December 12, 2002 10:44 AM

6En
En
JMONITOR INDICATIONS
Shooting mode
Items Indications
1 Shooting mode , , , , , ,
2 Battery check ,
3 Green lamp
4 Flash stand-by/
Camera movement warning/ Flash
charge
(Lights)
(Blinks)
5 Macro mode
6 Flash mode , ,
7 Sequential shooting ,
8 Self-timer
Remote control
9 Record mode SHQ, HQ, SQ1, SQ2
10 Resolution 2272 × 1704, 2048 × 1536, etc.
11 Exposure compensation -2.0 – +2.0
12 Metering
13 White balance , , ,
14 AF target mark [ ]
15 Memory gauge , , ,
16 Number of storable still pictures
Seconds remaining
16
16''
Still picture Movie
SHQ
SHQ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
5
6
9
11
13
14
15
16
basic_e_opx_6.fm Page 6 Thursday, December 12, 2002 10:44 AM

En 7
En
Playback mode
Screens with the information display set to ON are shown below.
Items Indications
1 Battery check ,
2 Print reservation, Number of prints ×10
3Movie
4Protect
5 Record mode SHQ, HQ, SQ1, SQ2
6 Resolution 2272 × 1704, 2048 × 1536, etc.
7 Exposure compensation -2.0 – +2.0
8 White balance AUTO, , , ,
9 Date and time ’03.05.17 15:30
10 File number (still picture)
Playing time/Total recording time
(movie)
FILE: 100-0030
0"/20"
2048
2048
1536
1536
Still picture Movie
14
2
5
6
7
8
9
10
14
3
5
6
7
8
9
10
basic_e_opx_6.fm Page 7 Thursday, December 12, 2002 10:44 AM

8En
En
Memory gauge
The memory gauge lights up when you take a picture or record a movie. While
the gauge is lit, the camera is storing the picture or the movie on the card. The
memory gauge indication changes as shown below depending on the
shooting status.
When the
whole memory gauge is lit
, wait a few moments
until the lit area goes
off
before taking the next shot.
When taking still pictures
When recording movies
Battery check
If the remaining battery power is low, the battery check indication on the
monitor changes as follows when the camera is turned on or while the camera
is in use.
* Energy consumption varies greatly depending on the camera’s operational
status. The camera may turn off without displaying the low battery warning.
Recharge as soon as possible.
Before shooting
(Gauge is off)
No more pictures can be taken
(Fully lit)
Wait until the gauge returns to the
status on the left to take the next shot.
One picture
taken
(Lit)
Shoot Shoot
Wait
More than two
taken
(Lit)
Shoot
Before
shooting
(Gauge is off)
Shoot
Wait
If you continue shooting
During shooting (Lit)
• Shooting is not possible until the lit area goes off completely.
• Movie recording ends automatically when the whole memory gauge
is lit.
Lights (Green)
Pictures can be
taken.*
Green and orange lamps on right
of viewfinder blink
Remaining power level:
exhausted
Replace with a charged battery.
Lights (Red)
Remaining power level: low
Recharge as soon as
possible especially for
extended use.
No indication
basic_e_opx_6.fm Page 8 Thursday, December 12, 2002 10:44 AM

En 9
En
Weatherproof feature
The camera is weatherproof and is not damaged by water spray from any
direction. However, it cannot be used underwater. Observe the following
precautions when using the camera.
Olympus will not assume any responsibility for malfunction of the camera
caused by water getting inside as a result of misuse by the user.
• The camera loses its waterproof capability if the battery compartment
cover, connector cover or DC-IN jack cover is open. Make sure that all
the covers are closed before using the camera.
• Wipe any water off the camera before changing the battery or card.
• Keep the lens out of the water when taking pictures. (The camera may
not focus correctly.)
• If the camera gets splashed, wipe the water off as soon as possible with
a dry cloth. Salt water spray or droplets can cause damage to the camera
if the camera is not wiped dry as soon as possible.
• Do not apply excessive force to or attempt to peel off the rubber packing
of the battery compartment cover, connector cover or DC-IN jack cover.
• If the rubber packing becomes worn or damaged, contact your nearest
Olympus service center. (A charge is made for replacement of parts.)
• If the rubber packing of the battery compartment cover, connector cover
or DC-IN jack cover contains dirt or sand, wipe it off before closing the
cover, otherwise water may get inside the camera.
• The rechargeable battery and other camera accessories are not
weatherproof. Care should be taken when using the accessories.
• Do not wash the camera
with water.
• Do not drop the camera
into water.
• Do not take pictures
underwater.
basic_e_opx_6.fm Page 9 Thursday, December 12, 2002 10:44 AM

10 En
En
JATTACHING THE STRAP
1Thread the short end of the
strap through the strap eyelet.
2
Thread the long end of the strap
through the loop that has
already gone through the eyelet.
3
Pull the strap tight, making
sure that it is securely fastened
and does not come loose.
JCHARGING THE BATTERY
This camera uses an Olympus lithium ion battery (LI-10B). The battery is
dedicated to this camera and other batteries do not work. The battery is not
fully charged when the camera is purchased. Fully charge the battery on the
specified charger (LI-10C) before first use. For details, read the charger’s
instructions (provided).
About the battery
Make sure that the + and – terminals of the battery
shown in the illustration on the right are correctly
oriented when loading the battery into the charger.
Strap eyelet
Connector terminals
Lithium ion battery
AC wall outlet
To the AC input connector
AC cable
Lithium ion battery
Charger
Charge indicator
When charge
indicator
changes from
red to green,
the battery is
fully charged.
basic_e_opx_6.fm Page 10 Thursday, December 12, 2002 10:44 AM

En 11
En
JLOADING THE BATTERY
1Make sure that:
• The monitor is off.
• The lens barrier is closed.
• The lamp on the right of the viewfinder is off.
2Slide the battery compartment
cover in the direction of (the
direction indicated by the
mark on the cover), and lift it up in
the direction of .
3Insert the battery in the direction
shown in the illustration.
4Close the battery compartment
cover so that it pushes the battery
down inside . While pressing the
mark, slide the cover in the
direction of .
• If the battery compartment cover seems
hard to close, do not force it. With the
battery compartment cover shut, press the mark firmly and push
in the direction shown in the illustration.
• Be sure to reset the date and time after changing the battery.
Important
Battery compartment cover
Connector terminals
basic_e_opx_6.fm Page 11 Thursday, December 12, 2002 10:44 AM

12 En
En
JINSERTING A CARD
“Card” in this manual refers to the xD-Picture Card. The camera uses the card
to record pictures.
1Make sure that:
• The monitor is off.
• The lens barrier is closed.
• The lamp on the right of the viewfinder is off.
2Open the connector cover while
pressing the mark in the
illustration.
3Open the card cover by
pulling the card cover
catch towards you.
4Face the card the correct
way and insert it into the card
slot.
• Insert the card while keeping it straight.
• Inserting the card the wrong way or at an
angle could damage the contact area or
cause the card to jam.
• If the card is not inserted all the way,
data may not be written to the card.
5Close the card cover.
Connector cover
Card cover catch
Card cover
Index area side
basic_e_opx_6.fm Page 12 Thursday, December 12, 2002 10:44 AM

En 13
En
6Close the connector cover.
• Press the mark in the illustration when
closing the connector cover.
Removing the card
1Open the connector cover and
the card cover.
2Push the card all the way in to
unlock it, then let it return slowly.
• The card is ejected a short way and then
stops.
3Hold the card straight and pull it
out.
• Do not press on the card with hard or pointed items such as ballpoint
pens.
Do not close the connector cover without
first closing the card cover.
Note
Releasing your finger quickly after pushing
the card all the way in may cause it to eject
forcefully out of the slot.
Note
Note
basic_e_opx_6.fm Page 13 Thursday, December 12, 2002 10:44 AM

14 En
En
JTURNING THE POWER ON/OFF
When shooting pictures
Power on: Open the lens barrier.
The camera turns on in the shooting
mode. The lens extends and the
subject is displayed on the monitor.
If the lens does not extend when the
lens barrier is opened, there is a
possibility that the barrier is not fully
open. Open the lens barrier fully
until you feel it click.
When using the camera for the first time or after the camera has been
left for about 1 hour with the battery removed, the date and time are
reset. In this event, “SET DATE & TIME” appears on the monitor
when the camera is turned on.
Press to turn off the monitor. The camera is still on.
Power off: Close the lens barrier slightly until it almost touches the
lens barrel.
The lens barrier stops just before it touches the lens and the
lens retracts. Wait until the lens is fully retracted before closing
the lens barrier completely.
The camera turns off. (The monitor also turns off.)
• Do not push the lens barrier forcefully against the lens as this may
damage the lens or cause it to malfunction.
Note
basic_e_opx_6.fm Page 14 Thursday, December 12, 2002 10:44 AM

En 15
En
When playing back pictures
Power on: Press with the lens barrier closed.
The camera turns on in the playback mode. The monitor turns
on and the last picture taken is displayed.
Power off: Press .
The monitor and the camera turn off.
• Never open the card cover, remove the card or the battery, or
connect or disconnect the AC adapter while the camera is turned on.
Doing so could destroy all data on the card. Destroyed data cannot
be restored. When changing the card, be sure to turn the camera off
before opening the card cover.
JSELECTING A LANGUAGE
1Open the lens barrier fully.
• The lens extends and the monitor turns on.
2Press .
• The top menu is displayed.
3Press on the arrow pad to
select MODE MENU.
4Press to select the SETUP tab, then press .
5Press to select , then press .
6Press to select a language, then press .
7Press again to exit the menu.
8Close the lens barrier to turn the camera off.
Note
Arrow pad ( )
basic_e_opx_6.fm Page 15 Thursday, December 12, 2002 10:44 AM

16 En
En
JSETTING THE DATE AND TIME
1Open the lens barrier fully.
• The lens extends and the monitor turns on.
2Press .
• The top menu is displayed.
3Press on the arrow pad to select MODE MENU.
4Press to select the SETUP tab, then press .
5Press to select , then press .
• The green frame moves to the selected item.
6Press to select one of the following date formats: Y-
M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press .
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7Press to set the year, then press to move to the
month setting.
• To move back to the previous setting, press .
•
The first two digits of the year are fixed.
8Repeat this procedure until the date and time are
completely set.
• The camera only displays the time in 24-hour time system (“2 p.m.”
would be “14:00”).
9Press .
• For a more accurate setting, press when the time hits 00
seconds. The clock starts when you press the button.
10 Close the lens barrier to turn the camera off
• The date and time settings will be canceled if the camera is left
without batteries for approximately one day.
Note
basic_e_opx_6.fm Page 16 Thursday, December 12, 2002 10:44 AM

En 17
En
MENU FUNCTIONS
JUSING THE MENUS AND TABS
When you turn on the camera and press , the top menu is displayed
on the monitor. The functions of this camera are set from the menus. This
chapter explains how the menus work, using the shooting mode screens.
WB
MODE MENU
-
CANCEL GO
SELECt
+
0.0
CARDSEt
CAMERA
DRIVE
DIGItAL ZOOM
OFF
OFF
ESP
ESP
PANORAMA
2 IN 1
ESP/ESP/
• Take you directly to the setting
screens.
• Display operational buttons at the
bottom of the screen.
If you press to select .
• Categorizes the settings into
tabs.
• Displays the tabs of each menu.
Select the desired tab on the left
of the screen by pressing .
Select a menu using the
arrow pad.
Press .
The top menu is displayed.
Tab
MODE MENU
Shortcut Menus
Arrow pad ( )
basic_e_opx_6.fm Page 17 Thursday, December 12, 2002 10:44 AM

18 En
En
How to use the menus
WB
MODE MENU
CARDSEt
CAMERA
DRIVE
DIGItAL ZOOM
OFF
OFF
ESP
ESP
PANORAMA
2 IN 1
ESP/ESP/
SEt
CAM
CARD
CARD%SEtUP
CAMCARD
SEtUP
ALL RESEt ON
ENGLISH
ON
ON
PIXEL MAPPING
REC VIEW
1Press to display
the top menu. Press .
Top menu CAMERA tab
CARD tab
SETUP tab
2Press to select a tab,
then press .
Press to
return to the
tab selection
screen.
Arrow pad ( )
basic_e_opx_6.fm Page 18 Thursday, December 12, 2002 10:44 AM

En 19
En
• Not all items can be selected depending on the camera mode and
settings.
• Pressing the shutter button with a menu other than the menus in
SETUP tab open allows you to take pictures using the settings
currently selected.
• If you want to save the settings after the camera is turned off, set
ALL RESET to OFF.
CARDSEt
CAMERA
DRIVE
DIGItAL ZOOM
OFF
OFF
ESP
ESP
PANORAMA
2 IN 1
ESP/ESP/
CARDSEt
CAMERA
DRIVE
DIGItAL ZOOM
PANORAMA
2 IN 1
ON
OFF
ESP/ESP/
CARDSEt
CAMERA
DRIVE
DIGItAL ZOOM
PANORAMA
2 IN 1
ON
OFF
ESP/ESP/
4Press to select a
setting. Press
to complete setting.
Press again to
exit the menu and return
to shooting.
The green frame
moves to the
selected item.
or
3Press to select an
item, then press .
CARDSEt
CAMERA
DRIVE
DEZItAL ZOOM
OFF
OFF
ESP
ESP
PANORAMA
2 IN 1
ESP/
To return to select an
item, press or
.
Note
basic_e_opx_6.fm Page 19 Thursday, December 12, 2002 10:44 AM

20 En
En
Shortcut menus
Shooting mode
Playback mode
Adjusts the brightness of the picture.
Sets the image quality and resolution.
Still picture : SHQ, HQ, SQ1, SQ2
Movie : HQ, SQ
Sets the appropriate white balance according to the light source.
Runs through all saved pictures one after another as slide show.
MOVIE
PLAYBACK Plays back movies.
INDEX Creates an index picture of a movie in 9 frames.
Displays all the shooting information on the monitor.
Erases the selected still picture or movie.
MOVIE PLAY
INFO
ERASE
basic_e_opx_6.fm Page 20 Thursday, December 12, 2002 10:44 AM