Olympus DS-2300 User manual

BZ8093T4-01-01-Q-REFER-E1 2005.03.18
Black Cyan
Recording Overwrite Recording
1
Press the NEW button to create a new file.
2
Press the REC button to start recording.
The record/play indicator lamp glows red.
Aim the microphone at the sound source.
3
Press the STOP button to stop
recording.
If you want to append additional recordings
to the same file, press the REC button again.
DIGITAL VOICE RECORDER
DS-2300
Quick Start Guide
Getting Started
Power Save Mode
When the recorder is ON but not in use for 10 minutes,
it will switch to power save mode automatically. To
reactivate the recorder again, press any of the buttons
on the recorder.
4H33M12S
REMA I N :
NEW F I LE
AUTHOR A
a
b
c
AUTHOR A
00M05S
LENGTH :
27M58S
a
b
a Current recording mode
bNew file number
cSelected Author ID
Insert Recording
1
Press the FF or REW button to choose
the file into which you want to overwrite.
2
Press the PLAY button to play the file.
3
Press the STOP button where you want
to start overwriting.
4
Press the REC button to start overwriting.
The record/play indicator lamp glows red.
5
Press the STOP button to stop overwriting.
AUTHOR A
00M12S
I NSERT REC
Turning ON the Recorder
Slide the power switch to the ON position to activate
the recorder.
21
3
1
2
3,5
4
1
3
2
4
5
1
Press the FF or REW button to choose
the file into which you want to insert
additional recordings.
2
Press the PLAY button to start playback.
3
While playing the file, press the FOLDER/
MENU button to insert an additional recording.
4
Press the REC button to start inserting
additional recording.
The record/play indicator lamp glows red.
5
Press the STOP button to stop inserting
additional recording.
aCurrent playback time
bTotal recording time of
the file being played

BZ8093T4-01-01-Q-REFER-E1 2005.03.18
Black Cyan
Other Function
Playing Erasing a File
AP0503
a File to be erased
2
1
5
3
1
Press the FOLDER/MENU button to
choose folder.
2
Press the FF or REW button to choose
the file that you want to play.
3
Press the PLAY button to start playback.
The record/play indicator lamp glows green.
4
Press the VOLUME (+) or VOLUME (–)
button to select the proper sound volume.
5
Press the STOP button at any point you
want to stop the playback.
Resume playback by pressing PLAY button again.
4
1
Press the FOLDER/MENU button to
choose a folder.
2
Press the FF or REW button to choose
the file you want to erase.
3
Press the ERASE button.
“FILE ERASE ?” flashes on the display for
approximately 8 seconds.
4
Press the ERASE button once more while
“FILE ERASE ?”is flashing.
The display changes to “FILE ERASE !” and
erasing will start.
∗“ERASE DONE” is displayed when the file is
erased. File numbers will be reassigned
automatically.
2
1
3,4
1
Press and hold the FOLDER/MENU
button for 1 second or longer.
2
Press the FF or REW button to choose
the setting item.
3
Press the REC button.
4
Press the FF or REW button to choose
the setting item.
5
Press the REC button to complete the
setup screen.
6
Press the STOP button to close the main
menu.
Setting item
REC MODE
MIC SENSE
EXIT
SUB MENU
VCVA
Setup
SP, LP
CONF or DICT
Exit MENU and return to STOP
mode.
Switches to the SUB MENU.
OFF or ON
2,4
1
3,5
6
Details of each setting item refer to the Reference
Manual for more information.
Setting item
LOCK
BEEP
FORMAT
EXIT
CONTRAST
BACKLIGHT
TIME&DATE
Setup
OFF or ON
OFF or ON
Recorder formatting.
Returns to the MENU.
1 to 12
OFF or ON
Time/Date setting.
MENU
SUB MENU
AUTHOR A
00M05S
LENGTH :
27M58S
a
b
aCurrent playback
time
bTotal recording
time of the file
being played
FOLDER A
F I LE
ERASE ?
Display (LCD Panel)
Record mode
Battery
indicator
Microphone
sensitivity
VCVA indicator
Folder
Current file
Total number
of files
Erase lock
indicator
E1-BZ8093-01