Omcan FP-BR-0014 User manual

Revised - 11/16/2021
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Food Processor
Model FP-BR-0014
Item 44532
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 8
-------------------------------------------------------------------------- 9
-------------------------------------------------------------------------------------------- 9
------------------------------------------------------------------------------------- 10 - 11
--------------------------------------------------------------------------------- 11 - 13
----------------------------------------------------------------------------------- 13
----------------------------------------------------------------------------- 14 - 15
---------------------------------------------------------------------------- 16 - 18
---------------------------------------------------------------------------- 19
------------------------------------------------------------------------------------------- 20 - 22
---------------------------------------------------------------------------- 23
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Figure Drawings
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model FP-BR-0014

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Safety and Warranty
General Information
SAFETY
When incorrectly used this equipment is a potentially DANGEROUS machine. Maintenance, cleaning or any
other service shall be performed by a duly trained person and with the machine unplugged. To avoid accidents
respect the following instructions:
Read completely these instructions
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5
Safety and Warranty
• To avoid to risk electric shocks and damage to the equipment never use it with wet clothes or shoes and/
or standing on wet oors. Do not plunge it into water nor any other liquid, do not spray water directly to the
equipment.
• When the equipment is in operation the operator shall supervise it, principally when children might be near.
• Unplug the equipment when: It is not in use, before to clean it, before to remove or to place some
accessory. Before maintenance or any other service.
• Do not operate the equipment if the cord or plug are damaged. Do not lean the cord on table edges, nor let
them lie on hot surfaces.
• When the equipment may have fall, have been damaged any way, or simply does not work, take it to
technical assistance to check.
• The use of accessories not recommended by the manufacturer may cause corporal damages.
• Keep the hands or any other object away from moving parts while the equipment is in operation.
• During operation never wear loose clothes with wide sleeves principally around the wrists.
• Make sure the equipment voltage and the network voltage are the same, and the equipment has been
solidly grounded.
• Before to start the equipment make sure the disc # 02 (Pic.03) and the chamber lid # 05 (Pic.03) are tted
securely in their correct position.
• Do not introduce the ngers nor any other object into the throat use the stomper to feed the processor.
• Do not introduce the ngers nor any other object inside the processed product unload opening. Keep hands
away from parts in movement.
• This equipment has been designed to be used in commercial kitchens, such as restaurants, canteens,
hospitals, bakeries, meat shops, etc.
The equipment is not recommended when:
• It is to be used continuously for industrial production.
• Ambient with corrosive or explosive atmosphere or contaminated with water vapor, dust or gas.
IMPORTANT
For enhance operator protection this equipment is provided with a safety system not allowing to be involuntary
switched ON after an eventual energy shortage.
IMPORTANT
Make sure the cord is in perfect conditions for use. If it is not, change it for a new one in accordance with the
technical specications and safety rules. The substitution shall be made by a qualied professional, and shall
respect the local safety norms.
IMPORTANT
This equipment must not be used by children or any persons with reduced physical or mental aptness, lack of
experience or knowledge, unless they are under supervision or have received from the person responsible for
safety, proper instructions on how to use the equipment.
IMPORTANT
Children shall be watched in order to avoid them to play with the equipment.

6
Safety and Warranty
IMPORTANT
In case of emergency take o󰀨 the plug from its socket.
IMPORTANT
Never spray water directly on to the equipment.
GENERAL SAFETY PRACTICES
IMPORTANT
If any recommendation is not applicable to your equipment, please ignore it.
The following safety instructions are addressed to both the operator of the machine as well as the person in
charge of maintenance. The machine has to be delivered only in perfect conditions of use by the Distributor
to the user. The user shall operate the machine only after being well acquainted with the safety procedures
described in the present manual. READ THIS MANUAL WITH ATTENTION.
BASIC OPERATION PROCEDURES
DANGERS
Some areas of the electric device have parts that are connected or have parts connected to high voltage.
These parts when touched may cause severe electrical shocks or even be lethal. Never touch manual
commands such as switches, buttons, turning keys and knobs with your hands wearing wet clothes and/or wet
shoes. By not following these instructions operator could be exposed to severe electrical shocks or even to a
lethal situation.
WARNINGS
• The operator has to be well familiar with the position of ON/OFF switch to make sure the switch is easy to
be reached when necessary.
• Before any kind of maintenance, physically remove plug from the socket.
• Provide space for a comfortable operation thus avoiding accidents.
• Water or oil spilled on the oor will turn it slippery and dangerous. Make sure the oor is clean and dry.
• Before using any commands (switch, buttons, lever), be sure it is the correct one. In case of doubt, consult
this manual.
• Never touch any manual commands (switch, buttons, lever) unadvisedly.
• If any work is to be made by two or more persons, coordination signs will have to be given for each
operation step. Every step of the operation shall be taken only if a sign has been made and responded.
ADVICE
• In case of power shortage, immediately switch the machine o󰀨.
• Use recommended or equivalent lubricants, oils or greases.
• Avoid mechanical shocks, once they may cause damages or bad functioning.
• Avoid water, dirt or dust contact to the mechanical and electrical components of the machine.
• DO NOT change the standard characteristics of the machine.
• DO NOT remove, tear o󰀨 or damage any safety or identication labels stuck on the machine. If any labels
have been removed or are no longer legible, contact your nearest dealer for replacement.

7
Safety and Warranty
SAFETY PROCEDURES AND NOTES BEFORE SWITCHING THE MACHINE ON
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON. Be sure to well understand
all the information contained in this manual. If you have any questions contact your supervisor or your nearest
Dealer.
DANGER
An electric cable or electric wire with damaged jacket or bad insulation might cause electrical shocks as well as
electrical leak. Before use, check the conditions of all wires and cables.
ADVICE
Be sure to well understand all the information contained in this manual. Every operation function or procedure
has to be thoroughly clear. Before using any commands (switch, buttons, lever), be sure it is the correct one. In
case of doubt, consult this manual.
PRECAUTIONS
The electric cable has to be compatible with the power required by the machine. Cables touching the oor or
close to the machine need to be protected against short circuits. The oil reservoirs have to be lled until the
indicated level. Check and rell if necessary.
OBSERVATION
For your own safety read all the machine stickers.
ROUTINE INSPECTION
ADVICE
When checking the tension of the belts or chains, DO NOT insert your ngers between the belts and the
pulleys and nor between the chain and the gears.
PRECAUTIONS
Check the motor and sliding or turning parts of the machine in case of abnormal noises. Check the tension
of the belts and chains and replace the set when belts or chains show signs of wearing. When checking the
tension of belts or chains DO NOT insert your ngers between belts and pulleys, nor between the chains and
gears. Check protections and safety devices to make sure they are working properly.
OPERATION
WARNINGS
Do not use the machine with long hair that could touch any part of the machine. This might lead to a serious
accident. Tie your hair up well and/or cover it with a scarf. Only trained or skilled personnel shall operate this
machine. Never touch turning parts with your hands or any other way, NEVER operate the machine without
any original safety devices under perfect conditions.

8
Safety and Warranty
AFTER FINISHING THE WORK
PRECAUTIONS
Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket. Never clean the
machine unless it has come to a complete stop. Put all the components back to their functional positions
before turning the machine ON again. Check the level of oil. Do NOT insert your ngers in between belts and
pulleys nor chains and gears.
MAINTENANCE
DANGER
Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY PULLING THE PLUG
OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always remove the plug from the socket in any emergency situation.
WARNING
Electrical or mechanical maintenance has to be undertaken by qualied personnel. The person in charge of
maintenance has to be sure that the machine is under TOTAL SAFETY conditions when working.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PART AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

9
Installation
PLACING
The equipment shall be installed on a level, stable and dry surface with preference 500mm height.
PROCEDURE TO ASSEMBLE THE DISCS
IMPORTANT
Before to place the disc chamber, make sure the disc is perfectly tted, to avoid damages to the chamber.
1. Fit the expeller dish # 01 (Pic.02) on the shaft # 03 (Pic.02).
2. Choose the disc # 02 (Pic.02) and t the disc on the shaft # 03 (Pic.02).
3. Tight the nut # 04 (Pic.02) on shaft # 03 (Pic.02).
4. Fit the disc chamber # 05 (Pic.02).
5. Tight the chamber locking handles # 06 (Pic.02).
6. Align the stomper # 07 (Pic.02) with the throat # 08 (Pic.02).
Technical Specications
Model FP-BR-0014
Power 1.5 HP / 1.12 kW
Electrical 120V / 60Hz / 1
Mouth Opening (Dia.) 6” / 152mm
Average Production 400 kg/h
RPM 510
Disc Size (Dia.) 17” / 429mm
Round Throat Size (Dia.) 6.3” / 161mm
Dimensions 21” x 26” x 27.6” / 530 x 660 x 700mm
Packaging Dimensions 34” x 27” x 34” / 870 x 690 x 860mm
Weight 157.6 lbs. / 71.5 kgs.
Packaging Weight 218 lbs. / 99 kgs.
Item Number 44532

10
Operation
STARTING
To switch ON the equipment follow the below instructions:
1. Make sure the disc chamber # 01 (Pic.04) is closed and duly locked.
2. Make sure the stomper # 03 is on the throat # 04.
3. Press ON/OFF switch # 02 (Pic.04) to position “I” to switch ON the processor.
IMPORTANT
Any other procedures to operate this equipment are not safe, in this condition the equipment must not be used.
SAFETY SYSTEMS
The processor has two more safety systems:
• The rst one do not let the processor to start with an open disc chamber.
• The second system actuate when the stomper is out of the throat, then the processor is switched OFF and
will turn ON only when the stomper returns to its place inside the throat.
IMPORTANT
The expeller dish # 01 (Pic.03) must always to be used.
IMPORTANT
Before to open the disc chamber lid # 05 (Pic.03) make sure the disc # 02 (Pic.03) is completely stop.
IMPORTANT
Clean regularly the disc chamber inside to avoid residues to accumulate and cause the o󰀪oad opening to be
obstructed.
OPERATION PROCEDURE
The food processor is an equipment working continuously and therefore it must be continuously fed. To start
operation rst move away the stomper # 01 (Pic.05) and introduce the product inside the throat # 02 (Pic.05),
then place the stomper on the throat and push the product gently downward.
IMPORTANT
Under no circumstances use tools nor your hand to push the product under process inside the throat, use
always the stomper.
CUTTING SELECTION
The following cutting selection table purpose is to guide the right discs selection to obtain some cuttings types
for each product.

11
Operation
PRODUCT CUTTING TYPE Discs
Beets Slices Slicer 1.5 and 3
Shreds Shredder 3, 5 and 8
Carrot Slices Slicer 1.5 and 3
Shreds Shredder 3, 5 and 8
Graters Grater
Cabbage Strips Shredder 3, 5 and 8
Shreds Grater
Mushroom Slices Slicer 1.5 and 3
Onion Slices Shredder 3, 5 and 8
Pepper Slices Slicer 1.5 and 3
Radish Slices Slicer 1.5 and 3
Shreds Shredder 3, 5 and 8
Potato Slices – Chips Slicer 1.5 and 3
Shreds Shredder 3, 5 and 8
Apple Shreds Shredder 1.5 and 3
Coconut Shreds Shredder 3, 5 and 8
IMPORTANT
The result of the cuts depends on the state, type and quality of the food to be processed.
Maintenance
Maintenance must be considered a set of procedures with the purpose to keep the equipment best operating
conditions, therefore increasing the equipment life and safety.
• Cleaning.
• Wiring - Check all wires regarding deteriorate conditions as well as all electric contacts (terminals)
regarding tightening and corrosion.
• Contacts – ON/OFF switch, emergency button, reset button, electronic circuits etc, check the equipment in
order to assure that all components are correctly working and the equipment operation is normal.
• Installation – make sure the installation followed the instructions.
EACH MONTH CHECK:
• Check the electrical installation.
• Measure the voltage at the socket.
• Measure the working current and match it with the nominal current.
• Check the tightening of all electric terminals to avoid bad contacts.
• Check electric motor shaft clearance.
• Check the wiring for overheating, insulation failures and mechanical damages.

12
Maintenance
EACH THREE MONTH CHECKS:
• Check electrical components such as ON/OFF switch, emergency button, reset button, electronic electric
circuits, overheating, insulation failings, or mechanical damages.
• Check bearings clearances.
• Check retainers, O-rings, V-rings and other seals.
CLEANING AND SANITIZING
All the removable parts of the processor shall be clean using water and neutral soap. Find below the
instructions to remove these parts.
IMPORTANT
Never clean the processor when connected to the electric network, switch it o󰀨 and unplug it.
IMPORTANT
Before to remove the disc chamber make sure the disc is completely stop.
PROCEDURE TO DISASSEMBLE THE PARTS
1. Switch OFF the processor and unplug the cord.
2. Move away the stomper.
3. Loose the chamber locking handles.
4. Remove the disc chamber.
5. Remove the disc.
6. Remove the expeller dish.
To assemble back the parts follow the inverse steps.
IMPORTANT
When washing the discs take care with the knifes, do not struck the knifes with hard objects, thus avoiding to
damage them.
CAUTIONS WITH STAINLESS STEEL
The stainless steel may present rust signs, which ARE ALWAYS CAUSED BY EXTERNAL AGENTS, especially
when the cleaning or sanitization is not constant and appropriate. The stainless steel resistance towards
corrosion is mainly due to the presence of chrome, which in contact with oxygen allows the formation of a
very thin protective coat. This protective coat is formed through the whole surface of the steel, blocking the
action of external corrosive agents. When the protective coat is broken, the corrosion process begins, being
possible to avoid it by means of constant and adequate cleaning. Cleaning must always be done immediately
after using the equipment. For such end, use water, neutral soap or detergent, and clean the equipment with
a soft cloth or a nylon sponge. Then rinse it with plain running water, and dry immediately with a soft cloth, this
way avoiding humidity on surfaces and especially on gaps. The rinsing and drying processes are extremely
important to prevent stains and corrosion from arising.
IMPORTANT
Acid solutions, salty solutions, disinfectants and some sterilizing solutions (hypochlorites, tetravalent ammonia

13
Troubleshooting
PROBLEMS, CAUSES AND SOLUTIONS
The processor has been designed to need minimum maintenance, however, some performance failures may
happen due mainly to natural worn out, caused by the use of the processor. If some problems arise with your
processor check table below where there are detailed some possible solutions.
PROBLEMS CAUSES SOLUTIONS
The machine does not start. Open disc chamber lid. Close the lid.
Problems with electric circuits. Call technical assistance.
Electric energy shortage. Check electricity supply.
The plug is out of socket. Place the plug in.
Smoke or burn smell. Problems with electric circuits. Call technical assistance.
Irregular cuts. Blunt knifes. Sharpen the knife.
The processed product remains
inside the machine.
Expeller dish is missing. Place the expeller dish.
The machine switches ON, but
when the product is inside the
machine stops or runs slowly.
Belt is slipping. Stretch the belt.
Electric shortage. Check electricity supply.
Chamber lid safety system has bad
contact.
Call technical assistance.
Unusual noises. Problem with the bearings. Call technical assistance.
Maintenance
salts, iodine compounds, nitric acid and others), must be AVOIDED, once it cannot remain for long in contact
with the stainless steel.
These substances attack the stainless steel due to the CHLORINE on its composition, causing corrosion spots
(pitting). Even detergents used in domestic cleaning must not remain in contact with the stainless steel longer
than the necessary, being mandatory to remove it with plain water and then dry the surface completely.
USE OF ABRASIVES:
Sponges or steel wool and carbon steel brushes, besides scratching the surface and compromising the
stainless steel protection, leave particles that rust and react contaminating the stainless steel. That is why such
products must not be used for cleaning and sanitization. Scrapings made with sharp instruments or similar
must also be avoided.
MAIN SUBSTANCES THAT CAUSE STAINLESS STEEL CORROSION:
Dust, grease, acid solutions such as vinegar, fruit juices, etc., salty solutions (brine), blood, detergents (except
for the neutral ones), common steel particles, residue of sponges or common steel wool, and also other
abrasives.

14
Figure Drawings

15
Figure Drawings

16
Parts Breakdown
Model FP-BR-0014 44532

17
Parts Breakdown
Model FP-BR-0014 44532
Item No. Description Position Item No. Description Position Item No. Description Position
38109 Skymsen Logo Small for 44532 00047.7 27696 Nylon Cover CN 4478 for 44532 03678.1 38593 Screw M5x6 DIN 84 Stainless Steel
for 44532 22996.2
30234 Washer L 1/4x1 6 ZB for 44532 00100.7 AH583 O Ring 31x25x3.5mm for 44532 03750.8 AH593 PFS M4x16 DIN 965 Stainless Steel
for 44532 23440.0
30270 Washer L 3 8 ZB for 44532 00101.5 27699 Cramp T 18R Small for 44532 04203.0 AH594 ARR.L.A13 DIN 125 Stainless Steel
for 44532 23736.1
AH560 Double Bearing (Primer) for 44532 00130.9 38089 Pre Isolating Terminal for 44532 04285.4 67035 Screw M4x16 DIN 912 Stainless Steel
for 44532 24892.4
AH561 Retainer Di.45xD.62xW.10 00063BRG
for 44532 00131.7 AH584 Full Double Bearing for 44532 08266.0 30059 Omcan Packaging Logo for 44532 27155.1
AH562 Bearing 6205 Z Di.25xD.52xW.15 for
44532 00132.5 AH585 PFS FCH UNC1/4"x1/2" RTIN for 44532 08814.5 AH595 PFS M5x16 DIN 965 Stainless Steel for 44532 27296.5
AH563 Bearing 6206 Z Di.30xD.62xW.16 for
44532 00133.3 38482 Screw M5x10 DIN 84 INOX for 44532 09197.9 67037 Foot BOR.Red.C/PFS M10x30 D.50x34x30 ALT for 44532 29340.7
AH564 Central Axle Z-13 for 44532 00134.1 AF878 Screw M4x10 DIN 912 INOX for 44532 09198.7 AE677 Key W / PROT.30223 M2FT2FE3V / 19
for 44532 30565.0
AH565 Central Axle Flange for 44532 00135.0 38404 Nut M4 DIN 934 for 44532 09205.3 67038 Grounded Wire Label for 44532 31140.5
AH566 PCA FIN.UNC 1.3/8" Brass for 44532 00138.4 38527 Cord 3x2.5mm2 for 44532 09551.6 27726 Cord Holder PG13.5 LC+P/9 for 44532 31923.6
AH567 Prision UNC3/8x2 ZB for 44532 00139.2 78916 Attention Caution Port for 44532 09641.5 AF904 Screw M4x8 DIN 7985 INOX for 44532 32433.7
AH568 Female Handle with Thread 3/8" for
44532 00140.6 AH586 Attention Label Spanish/English/Port for 44532 10240.7 AH596 Attention Care Symbol Label ENG for 44532 32572.4
AH569 Expelling Plate for 44532 00141.4 AH587 PCA M10 DIN 934 ZB for 44532 12343.9 AH597 PFS M6x30 DIN 916 Stainless Steel
(Obsolete) for 44532 32651.8
AH570 Base Fat.1.5/3mm for 44532 00149.0 AH588 PFS M6x16 DIN 933 INOX for 44532 12426.5 67040 Instruction Manual Label for 44532 32832.4
AH571 Grater Disc Base for 44532 00155.4 38280 Screw Nut M12 DIN934 INOX for 44532 12439.7 27754 Maintenance/Cleaning Label for 44532 34686.1
AH572 Disc Plate DESF.3 for 44532 00156.2 16419 Washer L.A6 4 125 INOX for 44532 12442.7 AH598 PFS M4x25 DIN 965 Stainless Steel
for 44532 35308.6
AH573 AD-450-S Pressure Rivet for 44532 00157.0 16421 Screw Nut M8 934 INOX for 44532 12445.1 AH599 Spiral Protection 1/2"x470mm for 44532 36845.8
AH574 Shrapping Disc Base for 44532 00159.7 38281 Screw Nut M6 DIN934 INOX for 44532 12448.6 AF923 Screw M3x8 DIN 965 INOX for 44532 37881.0
AH575 Disc Plate DESF.5 for 44532 00163.5 16422 Screw M8x20 DIN 933 Stainless Steel
for 44532 12455.9 AH600 PCA M4 DIN 985 ZB for 44532 39365.7
AH576 Disc Plate DESF.8 for 44532 00166.0 16423 Washer L.A8.4 Stainless Steel for 44532 12460.5 67042 Emergency Button 2NF (Pull to Unlock)
for 44532 40640.6
AH577 Fixing Wrench (C.Martel.) for 44532 00171.6 AH589 Electric Cable Protection for 44532 13723.5 67043 Emergency Label (10045238) for 44532 40643.0
27688 Clamp K22 (T 50R) for 44532 00210.0 38208 Wire Passer Molde 0922231 for 44532 13737.5 AH601 Washer 3mm M8 Stainless Steel for
44532 40763.1
38121 PFS Sex UNC3 8x1 RTZB for 44532 00241.0 30046 Sticker Clip for 44532 13757.0 AH602 CS Push Socket for 44532 42419.6
38381 Cover for 44532 01340.4 30047 Nut M4 DIN 934 for 44532 14175.5 AH603 Push Handle for 44532 42511.7
AH578 Driven Pulley (Primer) for 44532 01622.5 AH590 Engine 1.5CV 60Hz W BEN01542 for
44532 14858.0 AH604 Sensor Protection Plate for 44532 42517.6
AH579 Grater Disc Plate for 44532 01806.6 30048 Cable 3x0.75mm for 44532 16798.3 AH605 CS Nozzle for 44532 42584.2
AH580 Larger Hexagonal Lock for 44532 01818.0 79037 Positive Terminal Lock for 44532 17581.1 AH606 Chamber of Discs for 44532 42691.1
30350 Nylon Cover CN-4472 for 44532 02031.1 30050 Terminal Cover for 44532 17582.0 AH607 Collecting Bin W/ Support for 44532 42694.6
38469 Cover for 44532 02313.2 AH591 Motor Pulley (Primer) for 44532 19501.4 AH608 Socket Stop Bushing for 44532 42695.4
27693 Washer L.A8.4 ZB for 44532 02730.8 AH592 PFS Sex UNC1/4"x3/4" RTIN for 44532 19645.2 AH609 Collector Canister Lock Pin for 44532 42696.2
27695 Allen Screw M6x8 for 44532 03188.7 AG046 Adaptor Ring 3.96mm (Grey) for 44532 20290.8 AH610 Base Cover for 44532 43103.6
AH581 3mm Blade for 44532 03497.5 27711 Screw M5x10 DIN 933 Stainless Steel
for 44532 21081.1 AH611 Full Collection Box for 44532 43106.0
AH582 1.5mm Blade for 44532 03498.3 AF890 Nut M6 DIN 1587 INOX for 44532 22200.3 AH612 Base of the Camera for 44532 43345.4

18
Parts Breakdown
Model FP-BR-0014 44532
Item No. Description Position Item No. Description Position Item No. Description Position
AH613 CS Engine Cabinet for 44532 43348.9 AH632 CH.P.BUT.W/D.Channel 1m Complete
Hardhu for 44532 46785.5 AH649 Actuator+Sensor Set SSH5-30R1P4A + A for 44532 53182.0
AH614 Pushing Rod for 44532 43355.1 AH633 CB.3x1.5mm2x1800mm PG180 16A 3PR
H07R for 44532 46862.2 AH650 Pushing Rod for 44532 54283.0
AH615 Base Support Rod (Black) for 44532 43599.6 AH634 Single-Phase Safety Unit with Brake
for 44532 46952.1 AH651 Stem Bearing for 44532 54285.7
AH616 RT NR12 Actuator for 44532 43773.5 AH635 Container Fitting Label for 44532 47012.0 AH652 Rod Stop for 44532 54729.8
AH617 Dry-Met Bushing 5/8x23/32x5/8 for
44532 44151.1 AH636 Key W/PROT.30223 M2FT2EE3Y/19 for 44532 47044.9 AH653 Actuator Support Plate for 44532 55640.8
AH618 Belt 25 for 44532 44603.3 AH637 Push Rod Bushing for 44532 47088.0 AH654 CS Engine Cabinet for 44532 55839.7
AH619 Label Do Not Use JATO AGUA GR. for
44532 44938.5 AH638 Supply Stop Stem Push. for 44532 47089.9 AH655 Plate Closing Plate for 44532 55841.9
AH620 Equipotential Symbol Label for 44532 45006.5 AH639 Push Rod Stop for 44532 47091.0 AH656 O Ring 36.8x29.74x3.53mm for 44532 55842.7
AH621 Sensor Support for 44532 45082.0 AH640 ARR.P.B4 DIN 127 Stainless Steel for
44532 47397.9 AH657 Central Axle Z-13 for 44532 55843.5
AH622 10mm Shoe Mechanical Therm for 44532 45327.7 AH641 Motor 1CV 60Hz 127V W (12027724)
for 44532 47952.7 AH658 Central Axle Flange for 44532 56090.1
AH623 Sensor RT NR12 1m for 44532 45653.5 AH642 CS Base for 44532 48217.0 AH659 Single-Phase Safety Unit with Brake
for 44532 58886.5
AH624 CB.4x0.33mm2X1000mm with Brake
Connector for 44532 45723.0 AH643 Attention Label GR. for 44532 48471.7 AH660 CS Base for 44532 58889.0
AH625 CB.2x0.33mm2X1000mm with Brake
Connector for 44532 45727.2 65979 On/Off Key without/LED for 44532 48557.8 AH661 Sensor Support for 44532 58892.0
AH626 General Key Label for 44532 46509.7 AH644 CB.4x0.33mm2X1000mm with 6 VI
Connector for 44532 49464.0 AH662 Sensor Fixer for 44532 58894.6
AH627 1NA Reset Button for 44532 46526.7 67050 Actuator 1 Channel for 44532 49717.7 AH663 Collecting Bin with IMA for 44532 58897.0
AH628 Support Shaft for 44532 46531.3 AH645 Sensor 1 Channel 500mm EXCON for
44532 49760.6 AH664 CS Cabinet for 44532 60895.5
AH629 CS BNS Sensor Support for 44532 46539.9 AH646 1m EXCON Extension Whip for 44532 50501.3 AH665 1000mm EXCON 1 Channel Sensor
for 44532 61141.7
AH630 CB.4x0.33mm2X1000mm with 6 VI
Connector for 44532 46646.8 AH647 Ring for Key FE006-158 for 44532 51307.5 AH666 Container Fitting Label for 44532 61225.1
AH631 Emergency Button Label (Obsolete)
for 44532 46670.0 AH648 Emergency Button Label for 44532 51369.5 AH667 CS Base for 44532 65732.8

19
Electrical Schematics
Model FP-BR-0014 44532

20
Notes