Omega Excalibur Gold Series-1200atv User manual

COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT INC. 1998
1200ATV
GOLD SERIES
OWNER'S MANUAL
The Remote Transmitter ...........................................................................................................................3
The Easy ValetTM Switch.............................................................................................................................4
The Red LED Status Indicator ...................................................................................................................4
Automatic Transmitter VerificationTM ................................................................................................. 5-6
Transmitter Code JumpingTM .....................................................................................................................6
Transmitter Operations Overview ............................................................................................................7
Transmitter Button Operation .............................................................................................................. 8-9
Arming The System Using The Transmitter ........................................................................................... 9
Arming Bypass .......................................................................................................................................9-10
Sensor Bypass.............................................................................................................................................10
Passive System Arming By "Last Door Arming" ............................................................................10-11
Automatic Rearming ...........................................................................................................................11-12
Security System Armed And Activated.............................................................................................12-13
Disarming The Security System Using The Transmitter ...............................................................14-15
Easy ValetTM ...............................................................................................................................................15
Valet Override - Disarming The Security System Without The Transmitter....................................16
Exiting Valet Mode ...................................................................................................................................16
Remote Panic Feature...............................................................................................................................17
Optional Trunk Release And 3rd Channel Output ..........................................................................17-18
Red LED Status Indicator ...................................................................................................................18-20
Audible And Visual Indicators ............................................................................................................20-21
Prewarning Feature....................................................................................................................................21
Programmable Features ......................................................................................................................22-26
Programming Transmitters................................................................................................................26-27
Limited Lifetime Warranty .....................................................................................................Back Cover
Table Of Contents
Page - 2
Introduction
Congratulations on the purchase of your new Excalibur Gold security system and on
joining over 8 million people worldwide who have trusted their vehicle's security to the
designers of Omega Research & Development, Inc. Your Excalibur Gold system combines
state-of-the-artsecurity technology withpractical, user-friendly conveniencefeatures. You
willhaveincreased peace of mind knowingthatyour vehicle, and its contents,areprotected.
Theaddedconveniencefeatures will also enhance the enjoyment andsatisfactionoftheday-
to-day use of your vehicle. To learn how to operate your security system, please become
familiarwiththefollowingthreeprincipalusercomponents:theRemoteTransmitter,theRed
LEDStatus Indicator andthe Valet Switch.
TheRemoteTransmitter:Eachsecuritysystemcomeswithtwopre-learnedtransmitters,
butcanlearnupto4differenttransmitters.Thetransmitterhasthreebuttons:onelargebutton
at the top, near the LED* and two smaller buttons below. This system is pre-programmed,
through a built-in learning routine, to have the transmitter buttons work in the following
configuration:
The large upper button is used to arm, disarm and panic the security system.
The small center button may be used to operate the trunk release feature; or, in
conjunctionwith the largebutton,forsilentarming ordisarmingofthesystem, tooperate
remote sensor bypass, and temporary remote valet.
The small lower button is used to operate the 3rd Channel Output.
The remote transmitter's operation is explained in more detail on Pages 7-9.
* LED is the abbreviation for Light Emitting Diode, which is used as a visual indicator.
Page - 3 Page - 4
TheValetSwitch:ThisswitchisusedtoplacethesystemintoValetMode,whichprevents
manual arming and any automatic system functions which may have been programmed to
operate. The Valet Switch is also used, in conjunction with the ignition key, to perform an
Override function, which will allow you to disarm the security system in the event the
transmitter becomes inoperable. And finally, the Valet Switch is also used as part of the
ProgrammableFeaturesandTransmitterProgrammingprocedures.
TheRedLEDStatusIndicator:Informsyouofthepossibleconditionsthesecuritysystem
canbein;andalsoservesasavisualdeterrenttobreak-insandtheft. TheLEDStatusIndicator
is also used as the visual indicator for the Automatic Transmitter VerificationTM Feature.
The Valet Switch and the Red LED Status Indicator are supplied with a consolidated
mountingenclosure,whichplacesthemtogetherforeaseofoperation,or,ifdesired,theymay
belocatedseparatelyandmountedbyalternativemethods. Pleasespendtimereviewing this
guidetobecomefamiliarwithyourExcaliburGoldvehiclesecuritysystem. Wetrustthatyou
willfindthenewExcaliburGoldvehiclesecuritysystemperformstoyourhighestexpectations,
and will provide you with years of trouble-free convenience and protection.
PleasenotethatyournewExcaliburGoldvehiclesecuritysystemhas10userandinstaller
Programmable Features, described in detail in a later section, which allows customizing the
system's operations, some to suit your personal needs, and others which adapt the system
to a particular vehicle's installation parameters.

Page - 5
Excalibur Gold Advanced System Features
AutomaticTransmitterVerificationTM:YourExcaliburGoldvehiclesecuritysystemis
protected against a weakness which is shared by all other remote security systems, even
factory-equippedRemoteKeylessEntrysystems:athief'sabilitytocodehisown,unauthorized
transmitter to operate your system for the purpose of stealing your vehicle or it's contents.
Also, in normal operation, every time the ignition switch is turned "on", the LED Status
Indicatorwillflashandpausefortenseconds,thenumberofflashesbetweeneachpausebeing
equal to, and confirming, the number of transmitters encoded to operate your system. For
example:twoflashesandapauseindicatethatonlytwotransmittersarecodedtooperateyour
system. Intheeventthesystemalertsyoutoarecenttransmitteraddition,oriftheLEDStatus
Indicator flashes a total different from the number of transmitters you have programmed to
operate your system, you can now immediately reprogram your transmitters, effectively
erasing any unauthorized transmitters.
IMPORTANT NOTE: For the first 48 hours after your new system
is installed, every time the ignition switch is turned "on", the siren
will chirp rapidly (or the horn will honk rapidly) for two seconds, and
the LED Status Light will flash for 90 seconds. This will also occur
in
the event of a new transmitter code being entered into the system.
Page - 6
ThePatentedAutomaticTransmitterVerificationTM featureistheindustry'sfirstresponse
addressing the growing problem of a professional thief defeating a vehicle security system
by coding his own transmitter to operate the system. Previously, garage door openers were
commonlyduplicated byburglarstogain homeentry. Nowwhenyouleaveyourvehicle and
keyswithanyindividualforanyreason,youwillhavethepeaceofmindofknowingthatonly
your transmitters will operate the security system and that no other person has coded extra
transmitters to steal your vehicle.
TransmitterCodeJumpingTM:Whentheremotecontroltransmitterisoperated,aswitch
uponitis pressed so that itmaytransmitanencodedRadioFrequency(RF) signal. The word
"frequency"denotesthewavelengthofthesignal,andtheencodingisadigitalmessagewithin
thesignalwhich ensures the correct commandisfollowedbytheproperreceivingsystem. A
commonanalogyusedtoillustratethisisacommonpocketradio-thefrequencydenoteswhere
toturntheradio'sdialtohearaparticularprogram,andtheencodingisthelanguageandwords
which, if correct, are understood by the listener.
Each time you transmit a code to the security system, the transmitter and security system
will advance to another code to use for the transmission. The Code JumpingTM Transmitter
prevents a thief from using a "code grabber" device to record and play back a transmission
for the purpose of disarming your vehicle security system. Please note that pressing the
transmitter'sarm/disarmbuttonmanytimeswhileitisoutofrangeofthesecuritysystemcan
advanceitscodesbeyondtherangeofrecognition.Ifthisoccurs,simplypressthearm/disarm
buttonafewtimeswithinrangeofthesystemtore-synchronizetheCodeJumpingTMsequence
between the transmitter and the security system control module.
Transmitter Operations
Page - 7
SmallCenterButton-
If this button is held for 3
seconds, the security system
willactivatethetrunkrelease
function.
If this button is pressed and
then the large button is
pressedwithin 3 seconds, the
security system will arm or
disarm without audible con-
firmation.
Ifthisbuttonispressedwithin
3 seconds after arming the
system, the Auxiliary sensor
willbedeactivated.
Ifthisbuttonispressedwithin
3secondsafterdisarming,the
systemwillenterRemoteVa-
let.
LargeUpperButton-Press-
ing and releasing this but-
tonwillarmanddisarmthe
security system. If the op-
tionaldoorlockinterfaceis
installed,thedoorswilllock
upon arming, and unlock
upon disarming.
Pressing and holding this
button for 3 seconds will
"Panic" the system- which
willsoundthesiren(orhorn),
flashtheexteriorlights,and
also lock the doors.
RedLEDLight-Illumi-
nates and confirms
transmission when a
button is pressed.
SmallLowerButton-
Pressing this button for 3 seconds may be used to activate
other optional equipment, such remote car starting units; or
theprogrammableAnti-Carjackingfeature(Page26). Page - 8
The Remote Transmitter
TransmitterButtonOperation: Thetransmitter'sthreebuttonsindividuallycontrolthe
system's functions; and certain other operations may be performed by first pressing and
releasing one, then another button in sequence. Complete transmitter button operations are:
1) Arm / Lock: (System Disarmed) Press and release the Large Upper Button.
2) Disarm / Unlock #1: (System Armed) Press and release the Large Upper Button.
3) RemotePanic Feature: (At any time) Press and hold the Large Upper Button 3
seconds.
4) TrunkReleaseOutput: (At any time) Press and hold the Small Center Button 3
seconds. This operation also disarms the system (if armed).
5) 3rdChannel Output: (At any time) Press and hold the Small Lower Button for 3
seconds. If the Anti-Carjacking Feature is programmed to operate, it will be activated
if the ignition switch is on and 3rd Channel Output is operated.
6) SilentArm / Lock: (System Disarmed) Press and release the Small Center Button,
then press and release the Large Upper Button.
7) SilentDisarm /Unlock: (System Armed) Press and release the Small Center
Button, then press and release the Large Upper Button.
8) Armand bypassthe Auxiliary Sensor: (System Disarmed) Press and release the
Large Upper Button, then press and release the Small Center Button.
9) Disarm,then RemoteValet: (System Armed) Press and release the Large Upper
Button, then press and release the Small Center Button.

Page - 9
Pleasenotethatcertainconditions will affect the previously described systemoperations
-iftheignitionswitchis"on", the security system cannot be armed, but pressing andholding
thetransmitter'sLargeUpperButtonfor3secondswillengagetheRemotePanicFeature. The
Trunk Release output will not operate with the ignition "on", unless a door is open. The 3rd
Channeloutputmaybeoperatedregardlessoftheignitionswitch'sstatus. Also,whileinValet
Mode,thesystemcannotbecomearmed,butwillstilloperatethevehicle'sdoorlocks,parking
and dome lights, trunk release, and any function operated by the 3rd Channel Output.
To "arm" your security system is to place it into a state whereby it will respond to any
detected intrusion attempt. The security system can always be armed from the transmitter
provided the ignition switch is “off”, and the system is disarmed and not in the Valet Mode.
Toarmthesystem,afteryouexitthevehicleandcloseallofthedoors,simplypressandrelease
thelargetransmitterbuttononce, Instantly the exterior and interior lightswillflashonce,the
siren will chirp once (or the horn will honk once) and the LED Status Indicator will begin to
flashconfirmingthatthesystemisarmed. Further,thedoorswilllockandthestarterinterrupt
circuitwill preventany attempt tostartthevehicle.Threeseconds after thesinglesirenchirp
(or horn honk) and light flash, your security system is fully armed, and is ready to respond if
an intrusion attempt is detected.
ArmingBypass:Uponarming,ifanysensorcircuitisinoperable,thatcircuitisbypassed.
Forexample,ifthetrunkisleftopen,youcanstillarmthesystemnormallyfromthetransmitter.
When armed in this condition, the siren will chirp (or the horn will honk) three
Arming The System Using The Transmitter
Page- 10
times instead once. The bypassed circuit will automatically be reinstated for protection 5
secondsafterthatcircuitbecomesoperative,i.e., when the trunk is closed. When a triggered
circuit is in a bypassed state, all other operating circuits will be protected normally.
SensorBypass:YourExcaliburGoldsystem provides you with theconvenientoptionof
temporarilydeactivating the Auxiliary Sensor withoutaffectingany other trigger circuit.To
deactivatethe Auxiliary Sensor,simply press and releasethe small centertransmitter button
within 3 seconds of pressing the large transmitter button to arm the system. You will hear a
secondsirenchirp(orhornhonk),confirmingthesecuritysystemhasarmedwithoutthesensor
circuitprotectingthevehicle.Thenexttimeyouarmthesecuritysystem,thesystemwillreset
toitsnormalcondition,andtheAuxiliarySensorwillagainbepartofyourprotection. Ifdesired,
a second Auxiliary Sensor may be easily added to your system.
YoumayprogramyourExcaliburGoldsecuritysystemtoautomaticallyarmand,ifdesired,
also lock the doors. This feature is described in the following section. Automatic Rearming
is another method whereby the system can become armed. This is a Programmable Feature,
which may be configured to operate if desired, and is described on Page 11.
Passive System Arming And Rearming
LastDoorArming:Yoursecuritysystemcanbeprogrammedtoarmautomaticallywhen
thevehicle's last door isclosed. The momentthe last door closesthe siren will chirponce (or
the horn will honk once), the parking lights and dome lights flash once and the LED Status
Indicatorbeginstoflash rapidly. Thirty seconds later thesirenagainchirpsonce (or the horn
will honk again), the lights flash once, the doors will lock (if the Last Door Lock
Page- 11
and Automatic Relock feature has also been chosen) and the LED Status Indicator will slow
toasteadyflash,confirmingthatthesecuritysystemisfullyarmed.However,ifapointofentry
is reopened before the single siren chirp (or horn honk) and light flash at 30 seconds, this
passive arming process stops, and resets to start over again when that point of entry is re-
closed.
"AutomaticLastDoorArming"offersahighlevelofsecurity,sinceitdoesnotrequireyou
toremembertoarmthesecuritysystemwhenyouleaveyourvehicle.Additionally,Automatic
Last Door Arming may entitle you to an insurance discount. Please note that the previously
described Arming Bypass feature does not operate with Automatic Last Door Arming. The
Arming Bypass is designed to operate only when arming from the transmitter, because all
protected entries must be closed prior to the Automatic Last Door Arming sequence to start.
Topreventthesystemfromautomaticallyarmingwhilethevehicleisbeingrefueled,you
shouldputthesystem in Valet Mode, keep your dooropen,orturnonyourdomelightswitch
sothe systemdetectsthatyour doorisstillopen.Wedonot recommendleavingyourignition
key turned "on". Last Door Arming does not effect the operation or use of the transmitter to
arm the system - if desired, the transmitter may still arm the system at any time.
Automatic Rearming: Selecting the Last Door Arming Feature also adds Automatic
Rearming. This Feature causes the system to automatically rearm itself 90 seconds after
disarming, unless the ignition switch is turned "on". This prevents the accidental disarming
ofthesystembytheinadvertentpressing ofthetransmitter'sbuttonwhileplacingitin apurse
or pocket. If the "Last Door Locking and Automatic Relocking" Programmable Feature is
utilized,thedoorswillalsolockwhenthesystemautomaticallyrearms. AutomaticRearming
isindicatedbyafastflashingLEDStatusLightduringthe90seconds,thenaparkinglightflash
and siren chirp (or horn honk) when the system rearms.
RemoteValet: This Feature,whichoperates aspartof theAutomaticRearmingFeature,
willtemporarilycanceltheAutomaticRearming. TouseRemoteValet,pressandreleasethe
small lower transmitter button within 3 seconds after pressing the large transmitter button
when disarming the system. The parking lights will flash on and off, and the LED Status
IndicatorwillilluminatesteadytoconfirmRemoteValetoperation. Thesystemwillremainin
Remote Valet mode until armed again by transmitter; or, the Valet Switch may be pressed.
Page- 12
Whilethesecuritysystemisarmed,theLEDStatusIndicatorwillbeflashing.Shouldany
intrusionattempt occur, your system willinstantly activate, or"trigger". Once triggered, the
systemwill:
1) Soundtheelectronicsirenorthevehicle'shorn. Thesirenfeaturessixdifferenttones,
and every 5 seconds the siren will change the tone to generate more attention to the
vehicle.Thehornwillsoundaseriesofhonks,soundingforonesecond,thenpausing
one second. Every ten seconds, the horn honking will pause completely for 5
seconds, which avoids overheating the horn. This will occur for the duration of
Security System Armed And Activated

the activated cycle.
2) Theexteriorlightswillflash.
3) Thedoorswillrelock.Thisfeatureissouniquethatthesecuritysystemmonitorsthe
statusofthedoorand,ifopen,thesystemwaitsuntilthedoorisclosed,atwhichtime
it relocks the doors, so that the thief cannot easily regain entry.
The siren (or horn) and the parking lights will stay active for 60 seconds, or, unless you
disarmthe system with thetransmitter or by usingthe Valet Override. Ifallprotected entries
are secure at the end of 60 seconds, the system will stop and rearm automatically to detect
another entry attempt. If there is a protected entry still open, or an optional sensor still in a
triggered state at the end of 60 seconds, the system will reactivate for two more 60 second
cycles.Thesystemwillstopafteratotalof3minutesandrearmautomatically,whileignoring
only the open entry or triggered circuit. When the entry is closed, protection will begin
instantly for that circuit.
Aftertheactivationofthesecuritysystem,thedisarmconfirmationwillnolongerbe2siren
chirps (or horn honks), and the parking lights staying on. Instead, the system responds by
producing4 siren chirps(or horn honks) andthe parking lightsand dome lights flash4 times
beforestayingonfor30seconds.TheLEDStatusLightchangestoflashingtwotofivetimes,
thenpausing1secondtoindicatewhichprotectedzonetriggeredthesystem.TheLEDStatus
LightwillcontinueflashingthisZoneViolationCodeuntiltheignitionswitchisturned“on”,
whichclears the system'sLED Status Light memorycircuit.
Page- 13 Page - 14
Disarming The System Using The Transmitter
Whilethesecuritysystemisinthearmedstate,pressingandreleasingthelargetransmitter
button once instantly disarms the system and unlocks the doors. Disarming is confirmed by
the siren chirping (or horn honking) twice, and the parking and interior lights turning on for
30 seconds. However, the lights turn off instantly if the ignition switch is turned "on". If the
system was triggered while you are away, the disarm confirmation changes to 4 siren chirps
(or horn honks), 4 light flashes, and then the lights stay on for 30 seconds, to illuminate the
way to your vehicle. The security system has this response upon disarming until the ignition
switchisturned"on",which clears the unit's memory. Anytime the securitysystemtriggers,
theLEDStatusLightwillindicatewhichzonetriggeredthesystembyflashingtwotofivetimes,
pausing between flashes. This violation code continues to flash, even after disarming. The
systemcanholdfourdifferentcodesinmemory,whichisclearedbyturningtheignitionswitch
"on".
YourExcaliburGoldvehiclesecuritysystemoffersaveryhighlevelofpersonalsafetyand
conveniencewiththeadvancedfeaturesutilizedupondisarming.Theabilitytoknowinstantly,
ifyoursystemwastriggeredwhileyouwereaway,andtheexteriorandinteriorlightillumination
allows you a lighted approach to your vehicle with the ability to examine the interior before
entering.
Page- 15
If the security system must be disarmed without the use of the remote transmitter, please
see "The Valet Switch - Easy ValetTM & Override Modes" section.
The Valet Switch - Easy ValetTM & Override Modes
TheValetSwitchisdesignedtokeepthesecuritysystemfromactivelyorpassivelyarming
duringextendedstopoversforservicestations,maintenance,valetparking,carwashing,etc.,
by placing the system into Valet Mode. There are two methods to obtain Valet Mode: first is
EasyValetTM,wherebyadisarmedsystemmaybeplacedintoValetModewithouttheignition
key, and the second is Valet Override, which will disarm an armed or activated system and
requires the use of the ignition key.
AnotherformofValet,RemoteValet,maybeusediftheLastDoorArmingandAutomatic
Rearming Feature has been selected. This operation is performed via the transmitter upon
disarming,and is explainedon Page 12.
Easy ValetTM:This unique feature can be activated anytime the alarm is in the disarmed
condition. Easy ValetTM is unique because other security systems require the ignition switch
to be "on", but with this system, the ignition can be either "on" or "off".
Whenever the system is disarmed, simply depress the Valet Switch for two seconds to
achievetheValetMode.ThesystemwillconfirmitisintheValetModewithtwosirenchirps
(orhornhonks),andtheLEDStatusLightwillcomeonconstant.Thesystemwillholdmemory
of the Valet Mode condition while the ignition is "on" or "off". While in the Valet Mode, the
transmitters can still operate the Panic feature, an optional power doorlock interface, or
optionaltrunkrelease.Additionally,thedoors willlockwhentheignitionisturned"on"and
unlock when turned "off"', if this programmable feature is being utilized. Page- 16
ValetOverride-DisarmingTheSecuritySystemWithoutTheTransmitter:Intheevent
thetransmitterislost,damaged, oritsbatteries becomeexhausted,the ValetSwitchandyour
ignition key may be used to disarm the system:
Step1: Withthe system in thearmed condition, enter viathe driver's door(be aware that the
alarm will activate the instant the door is opened).
Step2: Using your key, turn "on" the ignition.
Step3: Within10seconds,pressandholdtheValetSwitchandthealarmwilldisarminstantly.
The Valet Switch is also part of the programming operations for learning new transmitter
codesandchangingprogrammablefeatures.Theseoperationsareexplainedindetail starting
on Page 22.
ExitingTheValetMode:WheneverthesecuritysystemisinValetMode,simplypressthe
ValetSwitchandinstantlythesystemrevertstothedisarmedcondition.ToconfirmthatValet
Modehasexited, the LED Status Lightturnsoff. Remember, if the securitysystemis armed,
the Valet Override procedure explained previously must be used.

Page- 17
Remote Panic Feature
Should you feel threatened or the need to attract attention; at any time you can activate
your Excalibur Gold's Remote Panic feature by depressing the large transmitter button for 3
seconds. Your system will respond by sounding the siren (or honking the horn), locking the
doorsandflashingtheexteriorandinteriorlightsfor60seconds.Shouldyouwishtoenteryour
vehicle or disengage Remote Panic, simply press and release the large transmitter button.
Optional Trunk Release: If your vehicle is equipped with electric trunk release, your
authorizedExcaliburGolddealercanconfigureyoursystemtoaccomplishtrunkreleasefrom
yourtransmitter.Tooperatethisoptionwhenequipped,simplypressandholdthesmallcenter
transmitterbuttonfor2seconds.Yourvehiclewillrespondbyreleasingthetrunklid,chirping
thesirentwice(orhonkingthehorntwice),disarmingthesystemandturningonyourexterior
andinteriorlightsfor30seconds. Thetrunkreleaseoutputwillnotoperatewhentheignition
switch "on" unless the vehicle's door is open.
Optional 3rd Channel Output: This output's operation is the same as the trunk release
output except for the following items: Press the lower small transmitter button for 2 seconds
to activate the 3rd channel output. The 3rd channel output will operate regardless of the
ignitionswitchbeing"on"or"off",andthereisnoaudibleorvisualconfirmation.Thisoutput
Optional Trunk Release And 3rd Channel Output
Red LED Status Indicator
The LED Status Indicator feature is a visual indicator of the security system's condition
or status at any given time. It is normally positioned in a location that is easily observed by
the driver. There are 16 conditions that are reflected by the LED Status Indicator:
1)Off = The security system is disarmed and not performing any automatic
functions.
2) On Constant = The security system is in the Valet Mode.
3)FlashingSlow = The security system is Fully Armed.
4) Flashing Fast = The 30 second Last Door Arming feature or 90 second Automatic
Rearming feature is in progress.
Automatic Transmitter VerificationTM:After the ignition is turned "on", the LED
StatusIndicatorwillflash toindicatethenumberoftransmittersprogrammedtooperateyour
securitysystem. Forexample: two flashes and pauseindicatesthat only two transmitters are
coded to operate your system. Whenever you leave your vehicle and keys with someone,
you will now have the peace of mind of knowing that only your transmitters will operate the
security system and that no additional transmitters have been coded into your system for the
purpose of stealing your vehicle. This feature works for 10 seconds every time the ignition
switch is turned "on".
Page- 18
may be used to operate optional equipment such as remote car starters or window roll-up
modules.
5)Flash-1x&Pause = 1 transmitter code is stored in the system's memory.
6)Flash-2x&Pause = 2 transmitter codes are stored in the system's memory.
7)Flash-3x&Pause = 3 transmitter codes are stored in the system's memory.
8)Flash-4x&Pause = 4 transmitter codes are stored in the system's memory.
ZoneViolation:IfthesystemisactivatedtheRedLEDStatusLightbeginstoflashandpause
the#9 through #12 sequencesto indicate which protected circuitcaused the activation. This
is seen while the system is activated, and after disarming, until the ignition switch is turned
"on", which will clear the security system's memory. The system's memory circuit can store
fourdifferent codes, andifmultipleviolationsinvolving differentzonesoccurs,thedifferent
zones show in the order of the violation.
9) Flash-2x & Pause = System was activated from the hood or trunk circuit wire.
10)Flash-3x&Pause = System was activated from the door circuit wire.
11)Flash-4x&Pause =System was activated fromthe auxiliary input.
12)Flash-5x&Pause = System's prewarn feature was activated.
ZoneTesting:Everytimetheignitionkeyisturnedoff,theLEDStatusLightwillflashand
pause the #13 through #16 code to indicate if a protected circuit, or "zone", is in an activated
state. For example: open a door after the ignition is turned off and the Red LED Status Light
will start flashing 3 times and pause until the door is closed. If another protected entry point
is violated while the door is still open, then the Red LED Status Light will alternate flashing
both zone violation codes.
13)Flash-2x&Pause = System is detecting a trigger from the hood or trunk circuit.
Page- 19
14)Flash-3x&Pause = System is detecting a trigger from the door circuit wire.
15)Flash-4x&Pause = System is detecting a trigger from the auxiliary input.
16)Flash-5x&Pause = System is detecting a trigger from the prewarn input.
Page- 20
The Security System is capable of utilizing an electronic siren or the vehicle's horn for
audible indications and output when activated. The dome and parking lights are also used as
visual indications. The siren produces a sharp "chirping" sound as confirmation of certain
operation.If utilizingthevehicle'shorn insteadofthesiren,simplyuse"horn honks"inplace
of "chirps" in the following descriptions:
1) One chirp & one light flash: The system has started a passive Last Door Arming
countdown and will become armed after the 30 second countdown expires. This chirp
indicates that the starter interrupt will engage and the doors will lock when the system
will become fully armed 30 seconds later.
2) One chirp, one light flash, & doors lock (if equipped thusly): The system has armed
passively or actively from the transmitter. The starter interrupt has engaged and doors
have locked. The system can be activated 3 seconds later.
3) One chirp after the arming honk above: The auxiliary sensor circuit is bypassed from
pressing the small transmitter button within 3 seconds of pressing the large transmitter
button.
4) One chirp, and no light flash, but only at the moment the ignition switch is turned "off":
The system is in Valet Mode, and will not arm actively or passively.
5) Two chirps & the lights stay on for 30 seconds: The system has just disarmed.
Audible And Visual Indicators

6) Threechirps&threelightflashes:Thesystemhasjustbeenarmedbythetransmitterwith
a protected circuit in a violated condition.
7) Four chirps & four light flashes, then the lights stay on for 30 seconds: The system has
just disarmed and was activated while you were away. The system will have this
disarming confirmation until the ignition switch is turned "on".
8) Two short chirps: The system has just entered the Easy ValetTM Mode.
9) Siren sounding, and lights flashing on and off: The system is in an activated state.
10) A series of chirps lasting two seconds after the ignition switch is turned "on": The
Automatic Transmitter VerificationTM feature (Page 5) has been activated. This will
also occur for 48 hours after installation .
11) A series of chirps lasting two seconds when the system is armed: The Prewarning
feature has been activated.
This circuit requires connection of the included shock sensor. When the sensor detects
a minor impact, the security system will respond by chirping the siren for two seconds (or
honkingthehorn).Afterthisfeaturehasbeenactivated5timesitwillautomaticallyshutdown
until the system is rearmed again. This will prevent the system from being a nuisance to the
generalpublic.
Prewarning Feature
Page- 21 Page - 22
Programmable Features
ThissecuritysystemhastenProgrammableFeatures,easilychangedthroughtheFeatures
ProgrammingMode. TheProgrammableFeaturesare:
Feature#1- LastDoor Arming and Automatic Rearming (Factory Setting Off).
Feature#2- LastDoorLockingandAutomatic Relocking (Factory Setting Off).
Feature#3- Ignition On / Off to Lock / Unlock Doors (Factory Setting On).
Feature#4- Open Door Bypass to Feature #3 (Factory Setting On).
Feature#5- 30 or 60 Second Activation Duration (Factory Setting 60).
Feature#6- DoublePulseDoorUnlock(Factory Setting Off).
Feature#7- Steady Siren Or Pulsed Horn Output (Factory Setting Steady Siren).
Feature#8- HornConfirmation Honk Loud Or Soft (Factory Setting Soft).
Feature#9- OpenDoor ArmingAlert(FactorySettingOff).
Feature#10- Transmitter-ActivatedAnti-CarjackingProtection(FactorySettingOff).
To access Features Programming Mode and change any of the Programmable Features:
Step#1: Turn "off" the ignition.
Step#2: Within 7 seconds of turning "off" the ignition, press the Valet Switch 5 times.
Step#3: You have just entered into the Feature Programming Mode. To confirm this, the
sirenwillrespondwithalongchirp.Forthenext10secondsthesystemisready for
you to select what feature code you want to access and turn on or off. The Feature
Programming Mode will deactivate if a selection is not made within 10 seconds.
Step#4: Within 10 seconds of entering the Feature Programming Mode, press the Valet
Switch the number of times that equal the feature number you wish to access. After
pressingtheValetSwitchmultipletimesthesirenwillchirpthesamenumberoftimes
toconfirmwhatfeaturenumberyouaccessforprogramming. Example:Press5times
andthe siren willchirp 5 times.
Step#5: To turn on the featurepressthelargetransmitterbutton.Thesirenwillchirponce
toconfirm thatthefeatureis turnedon.Toturnoff thefeature,press thesmallcenter
transmitter button. The siren will chirp twice to confirm the feature is turned off.
Duringthisstage,ifyoukeepturningthefeatureonandoff,theFeatureProgramming
Mode is extended for a further 10 seconds. Remember, 10 seconds without any
program activity will result in the system automatically exiting the Feature
Programming Mode, which is indicated by two long siren chirps.
Step#6 If needed, repeat steps 4 & 5 to access another feature to turn it on or off.
Step#7 Turning on the ignition, or 10 seconds of no programming activity, will exit the
systemfromFeatureProgrammingMode,whichisconfirmedbytwolongsirenchirps.
Page- 23
1)PassiveArmingandAutomaticRearming: IfFeature#1isturned"on",theLastDoor
Arming and Automatic Rearming Features will operate. Last Door Arming starts after the
ignitionswitchhasbeenturned"off"andatthelastopendoorisclosed. Themomentthelast
doorclosesthe alarmwillchirpthesiren, flash thelights,andbegina countdown (duringthis
countdownthe LED Status Lightflashesfast). Thirty seconds after thelastdoor was closed,
thesirenwill chirp again, the parking lightsflashonce,and the LED will begintoflashslow,
confirmingthatthe alarmisfullyarmed. Ifa point ofentryisreopenedbefore the 30seconds
expires, the countdown stops, and will reset to start again when the door is re-closed.
Upondisarminganarmedsystem,a90secondAutomaticRearmingcountdownwillstart.
DuringthiscountdowntheLEDwillflashrapidlyuntilanypointofentryisopened,whichwill
temporarily suspend the Automatic Rearming process until re-closed. At the end of the 90
secondperiodthealarmwillautomaticallyarmitself(notethatthedoorswillalsolockifFeature
#2isturned"on"). AutomaticRearmingiscancelledbyturningtheignitionswitch"on"before
the90secondcountdownends. TotemporarilysuspendeitherLastDoorArmingorAutomatic
Rearming(forexample,whilerefueling)theownershouldputthealarminValetModeorleave
the door open. It is not recommend to leave the ignition switch turned "on" for this purpose.
2)PassiveLockingandAutomaticRelocking:IfFeature#2isturned"on",andtheLast
DoorArming Feature isutilized, the doors willalso lock whenthe alarm becomes armed30
seconds after shutting the last door and also lock the doors when the alarm rearms from
AutomaticRearming.
3)Ignition On /Offto Lock/Unlock Doors:IfFeature #3 is "on", the doors will lock
Page- 24

Page- 25
2 seconds after the ignition switch is turned "on", and unlock instantly when the ignition
switch is turned "off".
4)OpenDoorBypasstoFeature#3:Iffeature#4is"on"thesystemwillcheckthevehicle's
doorcircuit.Ifitdetectsthatany of the vehicle's doors are open at the time,thedoorswillnot
automaticallylockwhentheignitionswitchisturned"on",norautomaticallyunlockwhenthe
ignition switch is turned "off".
5)30or60SecondActivationDuration: Feature#5willselectthelengthoftimethatthe
siren sounds and the lights flash when the alarm is activated or triggered. This can be used
whenlocallawrequiresshortersirentimesfornoiserestrictions. Pressingthesmalltransmitter
button when programming this Feature will select the 30 second timing cycle.
6)DoublePulseDoorUnlock: IfFeature#6is"on"thealarm'sunlockoutputwillpulse
twice to unlock some of the newer doorlocking systems.
7) Steady Siren Or Pulsed Horn Output: Instead of the siren, if the vehicle's horn is
preferred,thisFeaturechangestheoutputfromsteadytopulsed,allowingtheuseofthehorn
forthealarm'saudibleresponses. Ifthevehicledoesnotutilizeanexistinghornrelay,onemust
beaddedorthisoutput's1Ampcapacitymaybeexceeded,whichwilldamagethealarm.This
Feature is defaulted to Pulsed Horn, but set for Steady Siren at the factory.
8) HornConfirmationHonkLoudOrSoft: WhenthepreviousFeatureissetforPulsed
Horn, the arming and disarming confirmation honks may be adjusted with this Page- 26
Feature. When programming this Feature, pressing the large transmitter button will select
a longer output pulse, which will make the confirmation horn honk louder.
9)OpenDoor Arming Alert: WhenthisFeature is utilized, if oneofthe vehicle's doors
is open when the system is armed using the transmitter, the siren will chirp (or the horn will
honk) 3 times instead of once upon arming the alarm.
10) Transmitter Activated Anti-Carjacking: This Feature adds Anti-Carjacking
protection, and the ignition must be "on" for the Anti-Carjacking to operate. Press and hold
both transmitter buttons for 3 seconds. The siren will start chirping 53 seconds later, and for
thenextsevensecondspressingtheValetSwitchoncewillcanceltheAnti-CarjackingFeature.
At60 seconds the siren will fully sound, and the parking lights will also flash. At 90 seconds
the starter interrupt output will activate. Once the siren sounds and parking lights
flash,Anti-Carjackingcannotbecanceledunless the ignition is turned "off", then back "on";
the Valet Switch must be pressed once within 10 seconds of turning the ignition back "on".
This is the only way to cancel or turn off the Anti-Carjacking Feature - once activated, the
transmitter cannot be used to cancel or turn off the Feature.
Upto4differenttransmittersmaybeprogrammedintothesecuritysystem'smemory.When
a new transmitter code is programmed into the system, all previous codes will be deleted. If
athirdorfourthtransmitterisdesired,allofthetransmittersmustbeprogrammedintosystem's
memory. To program transmitters to operate your system, follow this process:
Programming Transmitters
1)Turn "on" the ignition switch.
2)Within 5 seconds of turning "on" the ignition switch, press the Valet Switch 5 times.
Note: The system will respond with a long siren chirp or horn honk, confirming that it is
ready to learn a transmitter code. If a code is not received or the ignition is turned "off",
the learning process will automatically terminate, which will be indicated by two siren
chirps or horn honks. When the first transmitter code is learned, all other prior codes will
be erased.
3)Tolearnthefirsttransmittercode,pressthelargetransmitterbutton,(whichwillarm/disarm/
panicthesystem),untilyouhearonelongandoneshortsirenchirporhornhonktoconfirm
that the code was learned. The two small button's functions will automatically be learned
at the same time.
4)Toprogramthe second,thirdorfourth transmittercodes,repeatstep 3.Aseachtransmitter
islearned,thelongconfirmationsirenchirporhornhonkwillbefollowedbytwoshortchirps
orhonksfortransmitternumbertwo,threeshortchirpsorhonksfortransmitternumberthree,
and four short chirps or honks for transmitter number four. An attempt to add any further
transmitter codes will be ignored.
5)Turningofftheignitionswitchor10secondsofnoprogrammingwillturnoffthetransmitter
learning program, which is confirmed by two long siren chirps or horn honks.
Whenever a transmitter is coded into the system, whether an existing one or previously
unknowntransmitter,thesirenwillchirporthehornwillhonkfortwosecondseverytimethe
ignitionisturned"on",for48hours. Additionally,theLEDStatusLightwillflashthenumber
of transmitters which can operate the system for 90 seconds instead of 10 seconds.
Page- 27 MO_EG-1200ATV.REV2
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions, (1) This device may not cause harmful interference and, (2) This device must
acceptanyinterferencethatmaybereceived,includinginterferencethatmaycauseundesired
operation.
ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorized
modificationstothisequipment.Suchmodificationscouldvoidtheuser'sauthoritytooperate
the equipment.
L I M I T E D L I F E T I M E W A R R A N T Y
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warrantedtobefreefromdefectsinmaterialsand workmanship under normal use. If a product sold by the Company
provestobedefective, theCompanywillrepairorreplace itfreeofchargewithinthe firstyearand thereafterallparts
to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return
shipping, to the original owner during the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc., P.O.
Box508,Douglasville,Georgia30133,withbillofsaleorotherdatedproofofpurchase.Thiswarrantyisnontransferable
anddoesnotapplytoanyproductdamagedbyaccident,physicalorelectricalmisuse or abuse, improper installation,
alteration,any use contrary toits intended function, unauthorizedservice, fire, flood, lightning,or other acts ofGod.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or any
incidentalorconsequentialdamagescausedbyanyfailureorallegedfailureoftheproducttofunctionproperly.Under
NoCircumstancesShouldThisWarranty,OrTheProductCoveredByIt,BeConstruedAsAGuaranteeOrInsurance
PolicyAgainstLoss.TheCompanyneitherassumesnorauthorizesanypersonororganizationtomakeanyWarranties
or assume any liability in connection with the sale, installation, or use of this product.