Omega FL46300 Series User manual

INSTRUCTION
SHEET
IN-LINE FLOWMETERS
FL46300 Series
R
omega.comTM
M3584/0600
The FL463300 Series of in-line
flowmeters offers individual, handmade
quality, combined with excellent
accuracy and repeatability.
These flowmeters are machined of high
Quality acrylic rod stock, carefully
Polished to a clear-as-glass finish. Easy
To read scales are screen printed on the
Meter body. Adapters are glass filled
Polypropylene, and O-ring seals are
Viton®.
SPECIFICATIONS
Accuracy: ±5%
Meter Construction: Acrylic body
O-ring Material: Viton®
Float: 316SS (PVC for Fl46302)
Temperature Limit: 65°C (150°F) at
0 psig
Pressure Limit: 150 psig at 21°C (70°F)
Pressure Drop: 2.0 psi max.
Dimensions: FL46301-06:208 H x 32
Mm D (8-3/16 x 1-1/4”); FL46307-09: 279 H x
32mm D (11 x 1-1/4”)
Weight: 680 g (1.5 lb)
INSTALLATION
Always use Teflon® tape or similar
material on pipe threads when
making connections. Never use oil
base pipe dopes or solvents.
Remember you are installing an
Instrument and fittings should be tightened
only enough to prevent leaking. Over
tightening may result in
damage to the meter.
Never hold the meter with pliers or
like tools during installation.
Install the meter in an exactly vertical
plane to obtain the best possible
reading.
Whatever the installation
circumstances, meter should never
be allowed to support the weight of
The related pipe or tubing.
When installing the Fl46300 series
meters, be certain of proper pipe
alignment, misalignment will put
excessive stress on the meter.
MAINTENANCE
The “Exploded View” drawings illustrate
assembly of the Fl46300 series meters.
If your flowmeter needs to be cleaned,
refer to these drawing when
reassembling the unit. The tapered tube
may be cleaned with a soft bottle brush.
Use a MILD soap and water solution for
cleaning purpose.
1
2
3
4
5
6
3
2
1
3/4” and 1” FPT
1
2
3
4
5
6
3
2
1
1/4”, 3/8” and 1/2” FPT
1/4” FPT
Adapter 3/8” and 1/2” FPT Adapter
1/4” FPT
Adapter
3/8” and 1/2”
FPT Adapter
Parts
1. Adapters (2)
2. “O” Ring Seal (2)
3. Wire Holder (2)*
4. Float (1)*
5. Guide Wire (1)
6. Meter Body (1)*
*Parts not available
need to buy a new unit.
Teflon® is a registered
Trademark of DuPont.
Viton® is a registered
Trademark of DuPont Dow
Elastomers

USAUSA
ININ
MADEMADE
WARRANTY/DISCLAIMERWARRANTY/DISCLAIMER
RETURN REQUESTS / INQUIRIES
OMEGA warrants this unit to be free of defects in materials and workmanship and to give satisfactory service for a period of 13 months from date of
purchase. OMEGA Warranty adds an additional one (1)month grace period to the normal one (1) year product warranty to cover handling and
shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit should malfunction, it must be returned to
the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be defective it will be repaired or replaced at no charge. However, this WARRANTY is void
if the unit shows evidence of having been tampered with or shows evidence of being damaged as a result of excessive corrosion; or current, heat,
moisture, or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components which wear
or which are damaged by misuse are not warranted. These include contact points, fuses, and triacs.
OMEGA is glad to offer suggestions on the use of it’s various products. Nevertheless, OMEGA only warrants that the parts manufactured by
it will be as specified and free of defects.
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT
OF TITLE AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of OMEGA with respect to this
order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of
the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.
Every precaution for accuracy has been taken in the preparation of this manual; however, OMEGA ENGINEERING, INC. Neither assumes responsibility
for any omissions or errors that may appear nor assumes liability for any damages that result from the use of the products in accordance with the
information contained in this manual.
SPECIAL CONDITION: Should this equipment be used in or with any nuclear installation or activity, purchaser will indemnify OMEGA and hold OMEGA
harmless from any liability or damage whatsoever arising out of the use of the equipment in such a manner.
Direct all warranty and repair requests/inquiries to the OMEGAENGINEERING Customer Service Department. BEFORE RETURNINGANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE
DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package
and on any correspondence.
FOR WARRANTY RETURNS, please have FOR NON WARRANTY REPAIRS OR
The following information available CALIBRATION, consult OMEGA for
Before contacting OMEGA: current repair/calibration charges. Have
1. P.O. number under which the product the following information available
was PURCHASED, before contacting OMEGA:
2. Model and serial number of the product 1. P.O. Number to cover the COST of
under warranty, and the repair/calibration,
3. Repair instructions and/or specific 2. Model and serial number of product,
Problems relative to the Product and
3. Repair instructions and/or specific
Problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGAENGINEERING, INC.©Copyright 2000 OMEGA ENGINEERING, INC. All rights reserved. This documentation may not be
copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without written consent of OMEGA
ENGINEERING, INC.
R
omega.comTM
OMEGAnet® Online Service
www.omega.com Internet e-mail
[email protected]
Servicing North America:
USA:One omega Drive, Box 4047
ISO 9001 Certified Stamford CT 06907-0047
Tel: [phone] FAX: [phone]
e-mail: [email protected]
Canada: 976 Bergar
Laval (Quebec) H7L5A1
Tel: [phone] Fax: [phone]
e-mail: [email protected]
For immediate technical support or application assistance:
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA®
Customer Service: 1-800-622-2378 / 1-800-622-BEST®
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN®
TELEX: 996404 EASYLINK:62968934 CABLE: OMEGA
Mexico: En Español: [phone]-7803 e-mail: [email protected]
FAX: [phone] [email protected]
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands
Tel: [phone] FAX: [phone]
Toll Free in Benelux: 0800 0993344
e-mail: [email protected]
Czech Republic: Rudé armády 1868,733 01 Karviná 8
Tel: [phone] FAX: [phone]
Toll Free in France: 0800-1-66342 e-mail: [email protected]
France: 9, rue Denis Papin, 78190 Trappes
Tel: [phone] FAX: [phone]
Toll Free in France: 0800-4-06342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: [phone] FAX: [phone]
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom: One Omega Drive, River Bend Technology Centre
ISO 9002 Certified Northbank, Irlam, Manchester
M44 5EX United Kingdom
Tel: [phone] FAX: [phone]
Toll Free in United Kingdom: 0800-488-488
E-mail: [email protected]
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that Apply. OMEGA is constantly pursuing
certification of its products to the European NewApproach Directives. OMEGA will add the CE mark to every appropriate device upon
certification.
The information contained in this document is believed to be correct, but OMEGA Engineering, Inc.Accepts no liability for any errors it
contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patent-connected applications.